Used Glob-Ram Rm110 for sale (3,593)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Nledsy R Npcspfx Aa Ejb Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Nsdoy Siftspfx Aa Eolb

Condition: ready for operation (used), Indramat CPUB 01-01 CPU module, used, good condition, 100% functional Nsdei Ebb Aopfx Aa Eolb

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC main spindle drive SN:230902-761859-015, used, normal signs of use, 100% functional, delivery as per photos. Njdpfsx Etxdjx Aa Eelb

Condition: repair required (used), Horizontal Plate Freezer Self Contained with built in compressor pack 6 station In cabinet, with doors Gram Compressor Hydraulic pack Condenser Njdjy T Icmepfx Aa Eelb Controls Unit does need a service/overhaul. Supplied "as is"

Condition: good (used), Year of construction: 2017, For sale / on request: - Kaak Driem line 1 - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) Nledjy Rkrropfx Aa Esb - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: used, Year of construction: 2006, machine/vehicle number: 2106008-27648, total weight: 2300 kg, with loading bucket Nljdjy Rvpijpfx Aa Ejb

Condition: used, Year of construction: 2007, Unladen weight: 1330 kg Nedpfx Aasy Rvrde Eelb

Condition: like new (used), Frama Inserting Machine, Type DI380 Nljdeyir Htspfx Aa Ejb Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Insert input capacity: 100 Envelope input capacity: 100

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Technical condition: New Nedeyfyymopfx Aa Eelb Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual travel and lift, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm Nlsdpfx Aajy N A Aas Ejb -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake Nlodpjrqipnsfx Aa Eeb -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total length: 6,400 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Working height 580 mm Year: 2007 Condition : Good used Nodpfxju Nw Szo Aa Ejlb Open Top Washing height 1300 mm Brushes 4 Also available in lines with drilling machine.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) Nlsdoyuiwaspfx Aa Eeb - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Nedpfx Aaov Dw R Ne Ejlb

Condition: ready for operation (used), Indramat 109-0780-4B01-01 TKF3 tacho SN:248222-60354, used, in good condition, 100% functional, scope of delivery as per photos. Nedpfx Aaey Nrw Te Eslb

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 AC Servo Controller / Servo Drive SN: 01517D, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Njdpfjy Nrxdox Aa Eslb

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor, SN: 35432, used, in good condition, 100% functional, scope of delivery as shown in photos. Nedpfxey Npfhs Aa Eelb

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor SN: 35638 - Cover missing, see photos, used, minor signs of use, 100% functional, delivery as per photos. Nedpfsy Npfnox Aa Eslb

Condition: ready for operation (used), Indramat 2AD132B-B050A1-BS03-B2N1 3-phase induction motor SN: 2AD132-14444, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nlodsi D Ifvjpfx Aa Eob

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Nodpfsi D Ihusx Aa Eelb

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Nljdpfx Aei D In Toa Ejb

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Nlsdpfei D Iqkex Aa Eeb

Condition: ready for operation (used), Indramat MDD112C-N-020-N2L-180GA0 Permanent magnet motor, hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, professionally tested and overhauled, with 12 months warranty, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Njdpfsi D Iwmjx Aa Eelb

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 Controller SN:234547768256008, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Nsdpfoi Ebhljx Aa Eelb