Used International 745 S for sale (18,910)

Year of construction: 2015, Condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC Dolrhsd Sg Hro Hv Nokl control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm Djlrh Hvjumvnhe Nokl - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2011, operating hours: 4,271 h, mast type: telescopic, fuel type: diesel, color: yellow, Year of manufacture: 2011 Field of application: Construction Drive: Wheel GVW: 17.547 kg CE mark: yes Genie S-85. Year: 2011. Hours: 4271. Weight: 17.547 kg. CE machine. Doljwcwxijrh Hv Nskl Max capacity basket: 227 kg / 2 persons. Max lateral force: 400 N. Max wind speed: 12,5 m/s. Max platform height: 25.91 meter. Max working height: 27.91 meter. Max outreach: 23.32 meter. Max permitted tilt: 45%. 74 HP / 55 KW Deutz engine. Rotated basket. Tyres: 13-625 70%. ID NR: 345. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2011, Exeron S 310 MF Year of construction: 2011 Generator hours: 26882 Control: exowin 20 x,y,z 310 x 270 x 270 mm c-axis 3r mounting in the head erowa chuck on the bed with magnet plate generator 64 A c-box for hard metal and pkd 20-fold changer fire extinguishing system chiller aluminium clamping plate erowa documentation machine is connected for inspection Dkjlrhov Nkrdj Hv Nol

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Delrhev T D R Ij Hv Nokl Application Types Injection Moulding

Condition: used, Year of construction: 2003, Technical details: Dolrsu Idhysh Hv Nskl bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Dkolrh Hved Hqa Io Njl Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: used, The band saw of the B S series is the entry-level model of the classic horizontal band saws and ideal for workshops and one-off production. Thanks to the swiveling saw frame, the machine can make miter cuts of up to 45 degrees. The saw frame feed is infinitely variable via a hydraulic valve and can also be readjusted during processing. The compact band saw has a low-maintenance and robust drive via V-belt and is equipped with a quick-release device and a coolant device. Dkolrh Hsv Ammwov Nol

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW Dkjlrh Hji Dtbijv Nsl L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: new, The ABS S NC is a high-performance production band saw with a dual column design. The material is fed via a controlled servo motor with ball screw drive and measuring system with a positioning and repeat accuracy of +/- 0.2 mm. The Omron touchscreen controller can store up to 30 programs with 50 steps each. For additional flexibility, this series also offers hydraulic bundle clamping as an option. The manually set miter angle can be read on a digital display. The workpiece is clamped hydraulically. Djlrsvq Niqjh Hv Nekl

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired Dkolrh Hei Dtbusv Njl OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: new, The ABS S NC is a high-performance production band saw with a dual column design. The material is fed via a controlled servo motor with ball screw drive and measuring system with a positioning and repeat accuracy of +/- 0.2 mm. The Omron touchscreen controller can store up to 30 programs with 50 steps each. For additional flexibility, this series also offers hydraulic bundle clamping as an option. The manually set miter angle can be read on a digital display. The workpiece is clamped hydraulically. Dkelrh Hvovq Nids Njl

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Dkelrei Dtb Aeh Hv Nol Visit us at our Wuppertal plant.

Condition: new, The DL S lathe series is slightly smaller than the DL E Heavy, but is also designed for large turning diameters and workpiece lengths. It is the solution for conventional machining of workpieces up to 5000 mm (197 in.) in length and over 720 mm (28 in.) in diameter. The particularly wide and heavily ribbed machine bed accommodates the heavy workpiece weights. The multi-disc clutch gives the operator control over the dynamics of the spindle start-up and the rapid traverse in the support is particularly effective with large bed lengths. Doljvq Ngierh Hv Nskl

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : Dolrhoi Dtbqj Hv Nekl e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: new, The DL S lathe series is slightly smaller than the DL E Heavy, but is also designed for large turning diameters and workpiece lengths. It is the solution for conventional machining of workpieces up to 5000 mm (197 in.) in length and over 720 mm (28 in.) in diameter. The particularly wide and heavily ribbed machine bed accommodates the heavy workpiece weights. The multi-disc clutch gives the operator control over the dynamics of the spindle start-up and the rapid traverse in the support is particularly effective with large bed lengths. Dkslrh Hovq Ngpsv Nol

Condition: new, The ABS S NC is a high-performance production band saw with a dual column design. The material is fed via a controlled servo motor with ball screw drive and measuring system with a positioning and repeat accuracy of +/- 0.2 mm. The Omron touchscreen controller can store up to 30 programs with 50 steps each. For additional flexibility, this series also offers hydraulic bundle clamping as an option. The manually set miter angle can be read on a digital display. The workpiece is clamped hydraulically. Dolrh Hovn Npfjv Nekl

Condition: new, The ABS S NC is a high-performance production band saw with a dual column design. The material is fed via a controlled servo motor with ball screw drive and measuring system with a positioning and repeat accuracy of +/- 0.2 mm. The Omron touchscreen controller can store up to 30 programs with 50 steps each. For additional flexibility, this series also offers hydraulic bundle clamping as an option. The manually set miter angle can be read on a digital display. The workpiece is clamped hydraulically. Dkelrh Hju Hf Iljv Njl

Condition: new, The DL S lathe series is slightly smaller than the DL E Heavy, but is also designed for large turning diameters and workpiece lengths. It is the solution for conventional machining of workpieces up to 5000 mm (197 in.) in length and over 720 mm (28 in.) in diameter. The particularly wide and heavily ribbed machine bed accommodates the heavy workpiece weights. The multi-disc clutch gives the operator control over the dynamics of the spindle start-up and the rapid traverse in the support is particularly effective with large bed lengths. Dkoleu E Sr Iorh Hv Nsl

Condition: new, The DL S lathe series is slightly smaller than the DL E Heavy, but is also designed for large turning diameters and workpiece lengths. It is the solution for conventional machining of workpieces up to 5000 mm (197 in.) in length and over 720 mm (28 in.) in diameter. The particularly wide and heavily ribbed machine bed accommodates the heavy workpiece weights. The multi-disc clutch gives the operator control over the dynamics of the spindle start-up and the rapid traverse in the support is particularly effective with large bed lengths. Dslrju E Rykeh Hv Nekl

Condition: new, The VDM series of vertical lathes offers modern, conventional solutions for machining large workpiece diameters and heavy workpiece weights. Their design enables particularly easy and safe loading and unloading. The feed drive is a high-torque servo motor and a powerful hydraulic system clamps the crossbeam. The main drive provides high torque for heavy machining and a side support is available for machining the outer contour. The standard mounted 3-axis position indicator ensures precision. Dkolrou E Nn Heh Hv Nsl

Condition: new, This model from the KMT S NC series is a modern, high-quality guillotine shear with high-quality components. The powerful motorised drive offers a high cutting capacity of up to four sheet thicknesses. The very sturdy design with a slotted blade bar and a small cutting angle of 1.3 degrees also enables cuts with minimal distortion in the workpiece. The cutting gap can be adjusted manually, while the cutting length is positioned via the NC control. Simple operation and quick adjustment reduce non-productive times in production. Dkjlrh Heu E Iqtov Nsl

Condition: as good as new (ex-display), Our Numturn series is the perfect solution for large workpieces that require a powerful CNC lathe. The robust box-way design ensures maximum precision. The control is extremely user-friendly. Two electronic hand-wheels let the user operate the machine just like a manual lathe. Options are available to customize the machine for special requirements. The Numturn series is the best choice for maintenance/service departments or single parts production. Dkjlrh Houyg Ersv Nol

Condition: as good as new (ex-display), The TDM S series machines belong to the class of universal lathes. They are equipped with an inverter that produces spindle speeds up to 2,000 rpm. The virtually intuitive operation makes this machine ideal for training applications. It features a large work area, manually shifted spindle drive, and a 4-station feed stop. A modern position indicator is included. The models in this series feature premium components and carefully machined surfaces. Dkelrh Houyg Dnev Nel

Condition: as good as new (ex-display), The TDM S series is a modern version of the classic universal lathe. It features a large work area, manually shifted spindle drive, and a feed system with rapid feed and feed stop. A wide selection of included standard equipment and many possible options make this machine very versatile and productive. A modern position indicator is included. The models in this series feature premium components and carefully machined surfaces. Dolreuyg Dbjh Hv Nokl