Used International 733 for sale (9,568)

Year of construction: 2020, condition: used, tank capacity: 2,700 l, GENERAL INFORMATION Equipment: Disc valve, spray head Design: upright Year of construction: 2020 Notes: Stated total height according to drawing; CE marking and declaration of conformity available only for 2 vessels External diameter: 1,650 mm Internal diameter: 1,450 mm Total height: 2,550 mm Heating/cooling: available Insulation: available Max. allowable operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Base type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Volume: 2,700 litres Double jacket volume: 10.0 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Previous application: brewery VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole / dome: in cylinder Outlet: DN32 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel Caodex Dlpcspfx Aduoa

Condition: used, mileage: 535,822 km, Year of construction: 2012, Serial number: XLER6X2000529xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21589 Specifications: 2012 model 535,822 km Euro 5 Automatic transmission 6x2 500 hp Tires (see pictures) Spring: full air L ft on 3 axles Slight rust in frame (see pictures) 2 ton lift w/ remote control Longitudinal partition (bad) Refrigeration/freezing unit P bygg: specialkarosser ab Total height: 4040 mm Internal width in cabinet: 2.496 m Internal length in cabinet: 8.775 m Caedpfx Aexznpaeduea Internal cabinet height: 2.584 m Air conditioning/ac Radio Light Ready for delivery Description: We have a 2012 Scania R500 6x2 box truck w/ 2 temp refrigerator/freezer unit for sale. The car functions as it should according to the owner. The longitudinal partition is in good condition. The refrigerator/freezer unit works well according to the owner. There is a little rust in the chassis of the car (see pictures) Ready for delivery Km: 535822 HK: 500 Technical approved: Yes EU-approved until: 31.01.2026 Own weight: 14420 Euro: 5 Model: R500 6x2 skapbil m/ 2 temp kjøl/frys aggregat Gearbox: Automatic

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Caedpfewu Inrex Aduoa Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Caedpfx Adougbn Esuoa

Condition: used, functionality: fully functional, Offered are used 20DV shipping containers available from Cologne. CONTAINER TYPE: 20DV shipping container CONDITION: Used, wind and watertight, cargo worthy, with valid CSC plate, wooden flooring, example images DIMENSIONS LxWxH: According to ISO standard External dimensions: 6,058 x 2,438 x 2,591 mm Internal dimensions: 5,898 x 2,352 x 2,390 mm Door opening: 2,338 x 2,280 mm Volume: 33.1 m³ Weight: 2,200 kg Caedex Dkhwopfx Adusa AVAILABILITY: Immediate TRANSPORT: Simply provide us with your postal code and we will send you a free and non-binding offer for the container including delivery and unloading from the truck if required. VARIETY: We also supply shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) and for any application—whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your enquiry! MAGITU GmbH

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC Codpjx A Ur Rjfx Adusaa External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Remarks: 1 ventilation line inside the vessel; outlet reduced via several fittings to an internal diameter of approx. 19 mm; mobile frame made of V2A Speed: 389 rpm External diameter: 1,250 mm Internal diameter: 1,200 mm Overall width: 1,900 mm Overall height: 2,850 mm Overall length: 1,700 mm Heating/cooling: available Power: 7.5 kW Max. permissible operating temperature: 150°C Max. permissible operating overpressure: 3.5 bar Max. overpressure: 4.0 bar Agitator: Disc agitator Base type: mobile frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Double jacket volume: 64.0 litres Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Last application: fermenter in a biotechnology company VESSEL Max. permissible operating temperature: 150°C HEATING/COOLING JACKET Bottom temperature control: double jacket Caodpfx Ajx Dlnloduoa EQUIPMENT Outlet: available MATERIAL SPECIFICATION Temperature control system material: V4A 1.4401 (AISI 316) AGITATOR 1 Voltage: 400/690 V Interference suppressor: Agitator arrangement: centrally mounted on top head Agitator equipment: mounting and operating instructions for the agitator are available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Performance Machining Center - 3 Axes Manufacturer: SPINNER Model: VC1150-10 (ST) Year of manufacture: 2017 Control unit: Heidenhain TNC 620 TECHNICAL DATA: Tool holder: SK40 Travel paths: X = 1,150 mm, Y = 620 mm, Z = 600 mm Codpfxox Dkizo Adujaa Spindle: 10,000 rpm, Max = 200 Nm, Pmax = 29 kW SPECIAL EQUIPMENT: - Chip conveyor, scraper belt, right-hand side - Tool changer with 60+1 positions - Direct measuring systems in X/Y/Z - High-pressure through-spindle coolant, 22 bar - Coolant/air blast switching for internal spindle flushing, via M-function - TNC software option "Probe System Functions" - Workpiece touch probe system for milling machines, Blum TC52 system The machine can be inspected under production conditions. Sale without guarantee or warranty. Subject to prior sale.

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Caodpjxbukwofx Adusa Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Csdpfxsx Aw Axe Adusaa

Condition: used, machine/vehicle number: UH9KK181425HFxxxx, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 20771 Specifications: Cedpfx Adowvyugouoaa - 2014 model - 16 pallets - Internal length: 6.7 m - Internal width: approx. 2.5 m - Internal height: approx. 2.7 m - 3 partition doors - Tires (see pictures) - Ready for delivery Description: 2014 HFR 2 axle cabinet trailer with Vector aggregate. The trailer was driven on so there is a dent on the right side. Ready for delivery. HK: 240 Technical approved: Yes EU-approved until: 16.10.2025 Own weight: 5600 Model: Skaphenger

Condition: used, Year of construction: 2016, operating hours: 11,725 h, Type of fuel: LPG Empty weight: 6.334 kg Dimensions (LxW): 290 x 140 cm Lifting capacity: 4.000 kg Lift height: 410 cm Fork length: 2.400 mm - Year: 2016 - Documentation available: Yes - CE certificate present: No - Serial number: 517335G00003 - Operating hours: 11725 Caodpfxsxfz Idj Aduea - Lifting capacity: 4000kg - Lifting height: 4100mm - Overhead clearance: 2750mm - Fork length: 2400mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Heating - Mast: Duplex - Drive: LPG - Motor brand: VW - Transport weight [kg]: 6334kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest Caedpex Dmrxsfx Aduea feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,800 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Description: - FEM carrier incl. forks and load hook - € 2.650,00 - Earth bucket 2200 mm 1 m3- - € 1.998,00 - Adapter Euro mount - € 1.339,00 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windshield wipers, LED, Cajdpfxjw Eqc To Aduja Specifications: -load capacity 3800kg -lift height 10,0m -MAX gradeability 40% -unladen weight 7330kg -engine KUBOTA 79,5kw ( 107 HP ) -capacity 3769 cm³ -exhaust standard Tier4f -steering all-wheel steering / crab steering / front wheel steering -rear hydraulics - 40 km/h -air conditioning -air suspension seat -carrier plate with hydraulically operated quick coupler -steering indicator light

Condition: ready for operation (used), empty load weight: 160,000 kg, nominal power: 295.024 kW (401.12 HP), 3 cardan aangedreven rollen, dus geen slippen/schuiven en ook ideaal voor conisch walsen - Digitale uitlezing - Elektromagnetische koppeling - 2 snelheden (variabel) 3 + 6 m/min - Motor: 220 pk/pk; 160 kWt - Rolcapaciteit: warm: tot 230 mm - Rolcapaciteit: koud: 120 mm - 2 hefsystemen inbegrepen - Inclusief reserve bovenrol van Ø 700 mm - Heeft de mogelijkheid tot sectiebuiging, asdiameter: 320 mm!! Benodigde fundering: 15 meter x 7 meter x 5,5 meter Caedpfx Adexqh S Houea Number of rolls: 3 Roll capacity cold: 4100 x 120 mm Roll dia upside: 890 mm Dia under roll - side rolls: 850 mm

Condition: used, VAT/margin: VAT qualifying Power: 400 w Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) Caedpfxjx Avg Aj Aduja 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Condition: used, Used Wefco 58500 litre total capacity 304L stainless steel vertical mixing tank. Unit measures approximately 3370mm internal diameter x 6165mm straight side. Has bolted flat top and welded dished bottom heads. Internal rated -6/+56 mbar at 0-50 degC. Includes internal coil rated full vacuum/4.5 bar design pressure. Includes top entry 2-tier 4-blade pitched paddle agitator direct driven by 5.5kw 3/50 1455/47 rpm SEW-Eurodrive motor and gearbox. Also includes 4-baffles. Mounted on (3) lugs. Cjdpfxsxyxmms Aduoaa Specifications: Capacity: 14,505.9 gal Diameter: 11.05' Height: 20.22' Type Of Heads: Bolted flat top, Welded dished bottom Vertical/Horizontal: Vertical Type of stainless: 304L Legs/Lugs: 3 lugs

Condition: used, Volume: 1000 l Manufacturer : Olsa Model: – Year: – Quality: stainless steel Capacity: 1000 litres   Stirring: 4,5 KW Motor speed : 710 – 1440 rpm   Internal pressure (bar): unknown, pressure possible Pressure gauge and inside pressure holding valve   Cjdpfx Adox Avdhoujaa Double jacket: yes Heat insulation: yes T°C control hot / cold: solenoid valves   Note: cleaning of interior marks possible in case of sale

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 1,320.9 gal Material of construction: Glass lined steel Internal pressure: 96 PSI Cajdpfxjxyxmgj Adusa Jacket pressure: 95.9753 Legs/lugs: 0

Year of construction: 1986, condition: used, Dimensions (LxBxH): 266 x 142 x 251 cm Rotation speed: 26 rpm Volume: 880 l Manufacturer : OLSA Casdpfx Adox Auv Neuea Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Caedpfxoxyxlpj Aduea Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Year of construction: 1997, condition: used, Current frequency: 50 Hz Voltage: 380 Continuous Heat shrink tunnel of BFB Packaging S. R. L. model M32N. Adjustable manual damper Internal circulation fan Exit cooling fan 380 V / 50 Hz Cjdpfxox Auvpe Adusaa Control panel with digital temperature regulation, emergency stop, painted steel construction and mounted on four adjustable feet. Material used to apply heat shrinkable film to bundles, packages, packs.

Condition: used, power: 5 kW (6.80 HP), Year of construction: 1990, Field of application: Mining Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Csdpfx Adjx Att Houjaa Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Condition: used, Field of application: Mining Technical documentation Description of the unit Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to simultaneously dry and mill wet solids, or cooling to reduce resulting material temperatures. Air and powder filtration / recycling system. – Product filtration and collection cyclone Csdpfxex Atmao Adusaa – Explosion proof valve – Rotary air / product sealing valve – Product recovery hopper Additional information Regular maintenance and servicing. Full Documentation available. Incomplete electrical and safety control cabinets. These items can be quoted separately.

Year of construction: 2019, condition: used, Power: 1 kW (1 HP) Manufacturer : ACS Instrument Model: 7400S Cedpfx Adjx Atlvsueaa Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Documentation available