Used Trumpf Trumabend V85 for sale (392)

Condition: excellent (used), Year of construction: 2012, operating hours: 55,771 h, Functionality: fully functional, laser power: 3,200 W, laser hours: 35,157 h, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, positioning accuracy: 0.02 mm, sheet thickness (max.): 20 mm, positioning speed: 140 m/min, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, year of last overhaul: 2024, table length: 3,000 mm, table width: 1,500 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Colov Hxbbsn Ufukerb

Condition: good (used), Year of construction: 2009, operating hours: 28,099 h, Functionality: fully functional, machine/vehicle number: A0220A2523, laser power: 3,200 W, laser hours: 28,099 h, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, workpiece weight (max.): 900 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D SL X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser Model: TruFlow 3200 Maximum power: 3,200 W Year of manufacture: 2008 Laser number: D0004 B1261 Wavelength: 10.6 µm Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 12 mm Sheet thickness aluminum: 8 mm Speed & precision Maximum speed (simultaneous): 140 m/min Positioning accuracy: 0.05 mm Average position deviation: 0.03 mm Crslnevzq Rdo Ufukeb MACHINE DETAILS Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Connected load: 73 kVA Laser switch-on time: 28,099 h Cutting time: 8,460 h

Year of construction: 2005, Condition: ready for operation (used), Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible. Crjlnov Daf Ne Ufukob

Condition: ready for operation (used), Punching force: max. 20 to stroke length: 16 mm strokes: 200, 300, 400, 600 1/min motor power: 4kW working ranges: transverse (x-direction) 1.000mm longitudinal (y-direction) 500mm working area max. 500 x 1.000mm table area: 875 x 1.600mm (without outrigger) weight: approx. 4.500kg Power: see photo data sheet Big number of stamping units as accesoirs with the machine Crsln Ufuoiknyhjksb Machine can still be seen under power at the last working company

Condition: good (used), Year of construction: 2011, Functionality: fully functional, laser power: 3,200 W, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Working area (LxWxH): 4,000 x 2,000 x 115 mm Workpiece weight: 1,700 kg Parallel/simultaneous speed: 60 / 85 m/min Control system: Siemens Sinumerik 840D SL Laser Laser power: 3,200 W Steel sheet thickness: 20 mm Stainless steel sheet thickness: 12 mm Aluminum sheet thickness: 8 mm Functions: PierceLine, FocusLine, PlasmaLine, LensLine, ControlLine, ContourLine, Microweld, AdjustLine, FastLine, FlyLine Laser control: TASC 3 with logbook function Laser cutting head: with 250 mm lens MACHINE DETAILS Dimensions: approx. 12.0 x 5.3 x 2.2 m Weight: approx. 14 t EQUIPMENT - Torque drive in combination with linear direct drives - Closed beam guide - Cooling unit - Automatic pallet changer in longitudinal direction - Longitudinal conveyor belt - 17" touch color screen - Work area lighting - Position laser diode - Spraying device - Beam pipe ventilation with N₂ - Maintenance-free turbo radial blower - High frequency excitation - Single cutting head strategy Coljv A U A Ten Ufukjrb - Universal cutting head quick-change device (UTI) - Simple and advanced workshop programming - Fast re-production - CE marking - Light barriers - Laser monitoring system - Multi-chamber extraction system and compact dust extraction system - Machine cladding with Makrolon panes

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, laser power: 3,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 6 mm, sheet thickness brass (max.): 6 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm CNC control: Siemens Sinumerik 840D SL Maximum weight: 900 kg Simultaneous rapid traverse: 265 m/min Laser Laser source: TruDisk 3001 Sheet thickness steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminum: 15 mm Sheet thickness copper: 6 mm Sheet thickness brass: 6 mm Functions: PierceLine, FocusLine, NitroLine, PlasmaLine, ControlLine, FastLine Accuracy Position deviation Pa: 0.05 mm Average position deviation Ps: 0.03 mm MACHINE DETAILS Length: 8,300 mm Width: 4,000 mm Height: 2,400 mm Weight: 12,000 kg Power: 6 - 29 kW Cslov A Uzvjn Ufukorb EQUIPMENT - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Automatic pallet changer in longitudinal direction - Wide longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - Automatic nozzle cleaning - Universal cutting unit with fully adaptive lens system - Protective glass to prevent lens contamination - CE marking - Light barriers - Multi-chamber extraction system - Integrated compact dust extraction system - Machine cover, certified viewing window, door on the right

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,280 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Working area: 2,550 x 1,280 mm Punching force: 18 t Maximum sheet thickness: 6.4 mm Maximum workpiece weight: 150 kg Control system: Bosch PNC-P Tool system Tool changer: 21 slots Number of clamps: 3 Coordinate guide: Linear magazine Holder: Mono tool holder with 360° rotation Workpiece system Coln Ufujv A Utrekorb Parts chute: automatic, up to 500 x 500 mm Good parts container: available EQUIPMENT - Stable C-frame - Maintenance-free digital three-phase servo motors - Hydraulic punching head system with closed control loop - Automatic tool length compensation - Programmable stripper movement - Programmable hold-down device - Tool spray lubrication - Punch slug extraction - Chip bucket - Graphic programming ToPs 2000 - CE marking with multi-beam light barriers and quick hydraulic shutdown - Multitool - Thread forming - Deburring and rolling technology - Repositioning cylinder - Sensor for parts slide - Clamping claws that can be opened individually - Vibration-damped installation A deposit of EUR 4,000 is required for transport security.

Condition: ready for operation (used), Year of construction: 1990, Trumpf punching and nibbling machine model trumatic 240 Year 1990 Crsln Ufev A Ad Sjuksb

Year of construction: 2006, Condition: ready for operation (used), Working range X/Y: 2585mm/1650mm, punching force: 220kN, laser power: 3200W (3.2kW), max. material thickness: 8mm, max. workpiece weight: 200kg, tool positions: 21, positioning speed X/Y: 90m/60m/min, simultaneous: 108m/min. Punching capacity: 900 strokes/min, marking capacity: 2800 strokes/min, laser hours: 14061h, operating hours: 81068h. The laser equipment of the machine has not been used for 8 years, only the punching capacities. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025. Croln Usv Ay N Ssfukeb

Condition: ready for operation (used), Year of construction: 2002, operating hours: 11,676 h, Functionality: fully functional, machine/vehicle number: KM-1148, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 3,200 W, punching diameter: 76 mm, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Cjln Ufujv Am Twjkjrb Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: good (used), Functionality: fully functional, motor voltage: 400 V, Trumpf nipple machine for sale. Machine is still fully functional but is no longer needed. Crjlnov Aatde Ufukob

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Crsln Ufjvtm Szjuksb Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 112273, laser power: 3,200 W, laser hours: 12,000 h, laser wavelength: 13 nm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, power: 3.2 kW (4.35 HP), year of last overhaul: 2020, table length: 3,000 mm, table width: 1,500 mm, Trumpf Trumatic Laser L3030 CO2 laser 3.2 KW Csljv A N U Rsn Ufukorb Beam on 12,000 hours Machines on 33,000 hours Viewing possible at any time by arrangement

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: Cjlorwlwnon Ufukorb - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function Celn Ufujunh D Dekorb - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, punching diameter: 76 mm, workpiece length (max.): 2,585 mm, workpiece width (max.): 1,280 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Technical information according to the manufacturer's brochure TECHNICAL DETAILS Control: TRUMPF CNC control based on the SINUMERIK 840D Passage height in punching mode: 35 mm Passage height in laser mode: 22 mm Maximum sheet thickness in punching mode: 8 mm Workpiece weight: 200 kg Partial slide: 500 x 500 mm Working area (X x Y) without repositioning Combined operation: 2,585 x 1,280 mm Punching mode: 3,085 x 1,370 mm Laser operation: 3,085 x 1,280 mm Punching Maximum punching force: 220 kN Maximum punching diameter: 76 mm Maximum stroke rate: 600 rpm Max. number of tool positions on the linear magazine: 19 with 2 Claws Cjlevytdwen Ufukorb Laser Model: TLF 2400 Power: 2,400 W Sheet thickness mild steel: 8 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 4 mm Distance control: DIAS III Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simultaneous: 108 m/min Positioning speed C-axis: 1 revolution/s Positioning speed C-axis when thread forming: 3 revolutions/s Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm MACHINE DETAILS Length: 8,100 mm Width: 7,500 mm Height: 2,400 mm Machine weight: 16,000 kg Electrical connection with TLF 2400: 70 kVA Connection pressure: 7 bar Maximum compressed air consumption: 65 Nm³/h

Condition: good (used), Year of construction: 2012, operating hours: 48,700 h, laser power: 2,700 W, laser hours: 11,000 h, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 6 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. Option 2: Workshop overhaul of the machine with commissioning and acceptance in accordance with the manufacturer's instructions at our factory. Installation, commissioning of the machine and training of up to 3 operators at the buyer's premises, free delivery of spare parts up to 6 months after commissioning. Surcharge, plus transportation and travel costs. Delivery time +8 weeks. After completion of the work, the machine can be inspected under production conditions, we look forward to your visit Standard equipment Crjln Ujivaqiefukob - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough and plastic rollers + Discharge station 3m with belt table + Focus line + Additional tube support + finished part length + 1.5m

Condition: excellent (used), Year of construction: 2005, TRUMPF, model TC-L 4050 with pallet changer Description: High-speed laser cutting machine (flatbed / CO2) Fabr. TRUMPF, model TC L 4050 with pallet changer. Complete maintenance by Trumpf Design: The workpiece rests, the cutting head moves. X-axis as gantry drive using servo motors and Y + Z axes with linear direct drives. Commissioned in 2005, operating hours: Beam ON: 14400 h, Laser ON: 41200 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB, USB interface, hard disk storage 500MB. Standard equipment: - TLF 6000 laser - HI-LAS high-pressure cutting - Cutting head quick-change device - Automated sheet edge detection - APC height control and process control - PCS Process Control System - Position laser diode - progr. cutting gas selection / pressure setting - progr. power cycles - Microweld - PMS plasma sensor system - SprintLas in all sheet thicknesses - ContourLas - AutoLas Plus - Laser power control - Spraying device - Laser logbook function - automatic pallet changer - automatic nozzle cleaning - Work area lighting - Conveyor for small parts / waste - Multi-chamber extraction - compact dust extractor - TFT color screen - Automatic switch-off - Safety devices - ToPs 100 lite - RJ 45 network connection - Remote maintenance via DSL (retrofitted) - Network connection Technical data: Table length 4000 mm Table width 2000 mm Torch heads 5", 7.5", 10" Laser power 6000 W Workpiece weight 2300 kg Axis speed max. 200 / simultaneous x+y 3m00/min Accuracy +/- 0.10 mm Sheet thickness for mild steel 25 mm Sheet thickness for stainless steel 25 mm Sheet thickness for aluminum 15 mm Control Trumpf-Sinumerik 840D Connected load 105 kVA Compressed air connection 7-10 bar Rated power 3 3-72 kVA Machine weight approx. 20000 kg Croln Ufuoubznnokob Space requirement approx. 13.2 x 5.4 x 2.4 m

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,549 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, laser power: 3,200 W, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Croljvzrb Dsn Ufukob Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Year of construction: 2007, Condition: good (used), TRUMPF TruFlow 3200 Trulaser 3030 (2007) Type of Current - 50 Hz Voltage - 400 V Rated power - 73 kVA Crsln Ufuovq Nngjkob Control voltage - DC 24 V Year of manufacture - 2007-08-15

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis - Automatic pallet changer Coln Ufusixl Tnskorb - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: reconditioned (used), Year of construction: 2005, laser power: 2,700 W, laser hours: 11,000 h, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 6 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. The machine can be inspected under production conditions, we look forward to your visit Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control Cjln Uouwkq Tofukorb - Laser logbook function - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700

Condition: reconditioned (used), Year of construction: 2010, operating hours: 49,200 h, Functionality: fully functional, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning Crsljuviyqjn Ufukob - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, SPECIAL EQUIPMENT + 4001 on TruDisk 5001 incl. BrightLine Fiber + nozzle changer + wide cross conveyor belt + cleaning brush + integrated camera for process monitoring with monitor interface and single image transmission to the network OPTIONAL WITH AUTOMATION + Liftmaster Compact 2040 + LiftMaster Compact loading station for extended stacking height (up to 300 mm / 3t) + Additional finished parts pallet + Storage interface RUNNING TIMES Time power supply on: 39889 hrs. Time laser ready for operation: 40921 hrs. Time laser beam on: 28012 hrs. STANDARD EQUIPMENT - Closed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Oil spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF Laser - TruDisk solid-state laser with 1 LLK outlet - LLK according to standard layout (laser directly next to machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control CUTTING UNIT - Universal cutting unit with fully adaptive lens system Crjln Ufuottwb Seksb - Single cutting head strategy - Protective glass against lens contamination - Condition check of the protective glass - ControlLine: Height control and sheet edge detection CONTROL - SINUMERIK 840D SL - Extended workshop programming (TruTops via network access) - Fast post-production - 17" touch color screen - Integrated technology data - Automatic switch-off - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-Shop - USB interface - RJ-45 network connection SAFETY - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Electric roll-up roof

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, laser power: 7,000 W, laser hours: 22,600 h, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, total length: 111,000 mm, total height: 26,000 mm, total width: 46,000 mm, workpiece weight (max.): 900 kg, overall weight: 12,000 kg, space requirement width: 4,600 mm, space requirement length: 11,100 mm, space requirement height: 2,600 mm, feed rate X-axis: 200 m/min, Special equipment: + 5000 to TruFlow 7000 30mm stainless steel ! Standard equipment: - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow - maintenance-free turbo radial blower - Lens cutting head with 250mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition check - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic switch-off - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transport locks Crjljivauben Ufukob - Crosshairs/ measuring bridge The machine is currently being overhauled in our factory in Lübeck. Once the work has been completed, the machine can be inspected under production conditions. Optionally with installation, commissioning and training of up to 3 operators at the buyer's premises for an additional charge, transportation and travel costs.