Used Pbr Tm 300 for sale (7)

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Fjdpfxs Aa Azls Actjpp Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Motor: 15 hp Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Fpedpfxs Acd N No Actop Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning lathe Year of manufacture: 1997 Control system: Fagor Distance between centers: 3000 mm Max. turning diameter: 630 mm Center height above the bed: 300 mm Center height above the cross slide: 165 mm Spindle bore: 105 mm Spindle speed: 2000 rpm Fodpfoil Hzzex Actjpp Weight: 6200 kg Included accessories: Multifix set (without steel), chuck (see photos) + additional chuck. No guarantee is given for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: like new (used), Fixed steady PBR 500 with roller rests, capacity 400 mm Fjdpfx Acey Sqb Ajtopp

Condition: used, turning diameter over cross slide: 690 mm, spindle bore: 180 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,040 mm, center height: 500 mm, quill diameter: 130 mm, quill travel distance: 2,000 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, overall weight: 8,700 kg, tailstock quill stroke: 420 mm, Lathe in excellent condition, ready for use. Viewed. Fpedpfx Acoypbfxotsp

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm Fpsdpfx Acjzt Szkotep total power requirement 70 kW weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MK Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Condition: ready for operation (used), - USED - CONVENTIONAL LATHE WITH DIGITAL READOUT SYSTEM Fedeyry Spopfx Actopp CENTRE HEIGHT: 500 mm DISTANCE BETWEEN CENTRES: 6000 mm MAX TURNING DIAMETER OVER BED: 1000 mm MAX TURNING DIAMETER OVER CARRIAGE: 310 mm BAR CAPACITY: 150 mm ACCESSORIES: RAPID FEEDS OVER CARRIAGE ; STEADY REST ; PLATEAU