Used Mc Cormick Mtx 150 for sale (11,473)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 80000 € 1512 € 200 to 500 mm 2.000 x 1.550 mm 800 mm 20 mm/s 2 mm/s 2400 mm 2000 mm 2600 mm Dwodpfx Asynmv Hskcoc 4800 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier Dwjdpfx Ajynm Icskcjc € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 43200 € 825.12 € 150 to 500 mm 800x600 mm 630 mm 22 mm/s 3 mm/s 4 kW 1800 mm 1200 mm 2400 mm 4500 kg Dodpeynnfcefx Akcjwc 2 speeds adjustable max. pressure manomete

Condition: new, neu ca. 4 Monate ab Auftragse Italien 31200 € 595.92 € 100 to horizontal verschiebbar 500 mm 700 mm 1550 mm 25 mm/s 2 mm/s 2400 mm 1200 mm 2450 mm 1960 kg HORIZONTAL MOVABLE CYLINDER 1.050 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure Djdpfjypbr Eox Akcswc manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2450 mm Dwodpfx Aksypbwnocsc 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 77000 € 1455.3 € 70 to 4 mm 920 mm 500 mm 180 mm 12 - 120 mm 50 - 80 1/min 8 80 mm 260 mm 560 mm 7.5 kW 1225 mm 1865 mm 3060 mm 7000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Dwsdpsyq Snmofx Akcec Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view - overload protector

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21500 € 412.8 € 150 to fix 300 mm 610 mm Djdjwirufepfx Akcewc 1520 mm 9 mm/s 5 mm/s 10 mm/s 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2470 mm 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20700 € 397.44 € 150 to fix 1000 mm 300 mm 1020 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 8 mm 600x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2450 mm 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations Dwodpfjwiru Ejx Akcec user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Frame width: 300 mm Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Dsdpfszymlqsx Akcewc Table height above floor: 875 mm Ram area: 180 mm Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. Dwedpfx Akoz Nh Hmecoc 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Dsdpfxsk Abr Ss Akcjwc Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, manufactured in 1998, which requires repairs. The turret needs to be overhauled. The machine is powered on. Otherwise, it has no other defects. Dsdpfxjz Ekq Eo Akcswc Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz We will gladly load the machine onto a truck for the customer using a forklift. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2004, Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power. Dwjdpfxjz Euc Es Akcoc

Condition: new, total length: 3,490 mm, Year of construction: 2025, load capacity: 15,000 kg, - Maximale Tragkraft 15.000 kg - Grundgewicht der Maschine 15.200 kg - Abnehmbare Kontergewichte 1.600 kg Z1 1.400 kg Z2 - L.M.I. Elektronische Lastbegrenzung Dodpfx Aksxpi R Iecewc - Modularität: Innovative Armwechsel- und Einrastfunktion ermöglicht vielfältige Konfigurationen. Nr. 3 verschiedene Armtypen: kurz - mittel - lang. - Vielseitigkeit: Abnehmbares Fahrgestell mit Lenkung, Ballast am Heck und Batteriefach an der Vorderseite. - Wirkungsgrad: Dank der Möglichkeit, je nach Bedarf einen von drei Auslegern zu montieren, kann der MC100.08 als Kran (10 t Tragfähigkeit) oder als Gabelstapler (14 t vertikal) eingesetzt werden. - Ausleger Auslegerwinkel -5° / +70° - Betriebsdauer 80V 608Ah, 8 Arbeitsstunden - Lenkung, Hinterachslenkung mit Lenkeinschlag -90°/+90° - Antriebsmotor Vorderachse 2x 7,5 kW AC - Bremsen Vorderachse2x 7,5 kW AC Antriebsmotorautomatisches elektro-mechanisches Bremssystem, Anhalten auf Rampe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces Dwodpfxsxabkze Akcoc - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. Dwodpfx Aksxaabfocsc range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: used, functionality: unexamined, Ferwood Code: RU0008923 - Manufacturer Code: 6714A1750 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dwedpjv Hgvmsfx Akcsc

Condition: used, functionality: unexamined, Ferwood Code: RU0008924 - Manufacturer Code: 6714A1734 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dwjdpfxov Hgw Do Akcjc

Condition: used, functionality: unexamined, Ferwood Code: RU0008929 - Manufacturer Code: 631417500 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Djdpfx Asv Hpyzjkcowc

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek Dwjdpfszy Nxtex Akcsc High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 214 KW

Condition: new, power: 185 kW (251.53 HP), first registration: 05/2026, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 120 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,480 mm, total width: 2,500 mm, total height: 3,070 mm, Year of construction: 2026, Equipment: air conditioning, = Additional Options and Accessories = Dwjdjzq D S Nspfx Akcec - Leaf spring suspension - Windshield = Notes = Fuel tank: 120 liters Air conditioning Roof-mounted rotating beacon with LEDs Headlight protection Foldable rear bumper DAB radio = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: 6-speed manual transmission Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 5,900 kg Payload: 9,100 kg GVW: 15,000 kg

Condition: used, mileage: 24,304 km, power: 110 kW (149.56 HP), first registration: 10/2024, fuel type: diesel, wheelbase: 43,320 mm, fuel: diesel, color: white, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, seat heater, trailer coupling, = Additional options and accessories = - Armrest - Passenger seat - Car kit - Third brake light - Electric front windows - Driver airbag - Remote central locking - Tinted glass - Rear doors - Height-adjustable steering wheel - Fog lights - Reversing camera - Winter tires - Partition without window = Notes = Minor damage on the front right side Air-suspended driver's seat with seat heating Winter tires Cruise control Reversing camera Passenger seat Apple CarPlay / Android Auto Navigation system Trailer hitch = Further information = Cab: simple Number of cylinders: 4 Engine displacement: 2,299 cc Unladen weight: 2,230 kg GVW: 2,230 kg Dodpjz Ervcefx Akcjwc Interior: gray Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E Dsdpfx Ajyrn Raskcjwc - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: excellent (used), Year of construction: 2004, CATALOGUE NUMBER 7880 Dedpfx Akoztac Njcjwc Technical data: - max. cutting height 150mm - max. element width 500mm - working width of the saw blade shaft 400mm - shaft diameter 70mm - max. saw blade diameter 450mm - top: - anti-recoil devices - 2 toothed feed shafts, pneumatically pressed - bottom: - sliding roller - anti-recoil devices - 2 toothed feed shafts - saw blade shaft - 2 toothed feed shafts - stepless feed speed adjustment via a frequency inverter - feed motor 3kW - main motor 55kW - overall dimensions L/W/H 2120x1600x1630mm - weight approximately 2750kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, Year of construction: 2018, functionality: fully functional, working width: 1,000 mm, area performance: 3,600 m²/h, overall weight: 584 kg, tank capacity: 160 l, total height: 1,380 mm, total width: 1,100 mm, total length: 1,850 mm, water tank capacity: 150 l, operating speed: 6 mm/s, battery voltage: 36 V, gradeability: 16 %, noise level: 59 dB, empty load weight: 296 kg, TECHNICAL SPECIFICATIONS FEATURES Working width (cleaning) mm 1000 Working width (vacuuming) mm 1300 Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Power supply Battery 36V Power consumption W 2650 Drive Front and rear wheel drive IP rating IPX3 BATTERIES Type Gel battery pack (6 units) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x quantity mm x no. 540x295x380 x2 BRUSHES Dwsdpezpyi Ijfx Akcsc Diameter - Pad x quantity mm - inch x no. 508 - 20” x 2 Motor power x quantity W x no. 500 x 2 Motor speed rpm 170/140 Weight (head) - specific pressure Kg - g /cm² 65;79;101 / 24;29:37 TRACTION DRIVE Motor power W 600 Maximum travel speed Km/h 6 Climbing ability at full load % 16 VACUUMING Motor power W 600 Vacuum (water column) mbar/mmH2O 165 / 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59* TANK Type Double tank Capacity (cleaning solution) l 150 Capacity (dirty water tank) l 160 Weight (without/with batteries) Kg 296/584 Dimensions (L x W x H) mm 1850x1100x1380