Used Quappen Loader A27X for sale (4,754)

Condition: new, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, Ebert TL 30 ST LB special low loader, continuous level low bed, self-supporting construction, permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions 13,600 mm x 2,750 mm (also available in normal version), full air suspension, last axle self-steering, SAF axles, Mr. Ebert (phone) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! Dcobvpvjfiyvbs Dlog

Condition: new, Functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 1,500 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, pallet forks, OFFER !! €19,754 - now €18,564 !! (In our offer we also have the same model with a cabin at a promotional price - instead of €20,945 gross now only €19,754 gross! - PICTURES BELOW) The WARRANTY (3 YEARS!) applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only stationary dealer of the Kingway brand on the German market, with its own service. The FARMER 906 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair and similar industries. We also guarantee equipment service after the warranty period has expired. Wheel loaders are manufactured on the basis and under the supervision of. TECHNICAL PARAMETERS: - Manufacturer: KINGWAY DEUTSCHLAND e.K. - Model: 906 - Open cabin, work lighting, joystick control, rain protection roof. ENGINE INFORMATION: - Engine: PERKINS 403J-11 - Diesel - Cylinders: 3 Dcobvpvevz Tguo Dlsg - Displacement: 1131cm3 - Emissions class Euro 5 - Max. rated engine power: 18.5 kW / 25 HP at 2800 rpm - Max. torque in Nm: 66.9 at 2100 rpm - Cooling system: Water-cooled - Noise level: 92 Db - Power supply: 12V - Battery: 12V / 60 Ah DRIVE Drive unit: Hydrostatic with 2 drive motors (1 gear) - PWG ITALY Drive speed (gear 1): 0-18 km/h FILLING VOLUMES AND PRESSURES: - Fuel tank capacity 32 liters - Hydraulic oil tank capacity: 40 liters - Max. hydraulic oil output: 36 L/min - Max. hydraulic oil pressure: 180 bar - Hydraulic oil flow 33l/m WEIGHT INFORMATION: - Operating weight: 1,500 kg - Max. tipping load (straight on the pallet fork): 900 kg - Max. lifting load (on the attachment): 600 kg DIMENSION INFORMATION: - Steering angle: 45° - Turning radius inside/outside: 1,556 mm / 2,500 mm - Lifting height (lower edge of standard bucket): 1,850 mm - Dumping height (with standard bucket): 1,830 mm - Dumping angle: 45 ° - Standard bucket: 0.4 m³ loading volume - Total length: 3,660 mm (with standard bucket) - Total width: 1,150 mm (with standard version) - Total height: 2,280 mm (with standard tires) - Track width: 880 mm - Wheelbase: 1,370 mm TIRES - 26x12.00-12 field profile SPECIAL FEATURES: - very high-quality and robust workmanship - Euro mount (STANDARD) - lockable tank and hood - easy to handle - compact and versatile - lighting system - hydraulic quick-change system - third hydraulic oil circuit for attachments - CE tested according to the latest standards and guidelines - sale WITHOUT TAX possible (only with VAT number) - FINANCING possible SCOPE OF DELIVERY: - FREE delivery within a radius of 200 km - A wheel loader / farm loader Farmer 906 - incl. 1.35cm bucket + fork - Hydr. quick coupler - joystick control - 4x4 - all-wheel drive - EURO MOUNT - ROAD APPROVAL - Floating position - Operating license for Germany - Trailer coupling, For each of our loaders you can also order: - Trailer coupling, - Additional weights, - Any possible accessories such as pusher, crocodile, snow plow, volume shovels, sweeper, grab bucket. WARRANTY : - Every machine has a 12-month warranty, which can be extended by a further year. - After the warranty period has expired, we ensure our customers have access to all spare parts. SERVICE : - We have our own mobile service that reaches all our customers in Germany and outside Germany.

Condition: used, lifting height: 7,000 mm, Year of construction: 2018, operating hours: 1,277 h, load capacity: 3,100 kg, Equipment: cabin, JCB 531-70 Year of manufacture 2018 1,277 hours Joystick 1 hand 3 control circuits 3 steering modes - front wheel, crab steering, all-wheel drive Lifting height 7 m Dobovzip Ejvpv Dlecg Load capacity 3.1 tonnes Price €43,900.00 net Available for an additional charge Earth bucket €1,390.00 net Lightweight bucket 2 m³ €1,950.00 net Lightweight bucket 2.7 m³ €2,150.00 net Lightweight bucket with double scraper bar (reversible blade) 2 m³ €2,250.00 net Lightweight bucket with double scraper bar (reversible blade) 2.7 m³ €2,450.00 net For JCB or Manitou, Claas, Merlo small work basket 1.2m wide €990.00 net Large work basket 2m wide €1,550.00 net Viewing possible at any time, by telephone appointment. All information without guarantee.

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,150 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,530 mm, first registration: 10/2004, Year of construction: 2004, total width: 2,530 mm, total height: 1,100 mm, Equipment: ABS, 2-axle Müller-Mitteltal TP platform FIN: 40048317 Chassis / add-on parts: * 2 x SAF axles with drum brake * 102 cm ride height * Air suspension * Tires: 235/75 R.17.5 * Residual profile: approx. 50-70% * Double tires * Rear drop supports * Widening plates Superstructure: * Platform * Platform dimensions: 7,250 mm x 2,530 mm * Lashing eyes on the side * Mounting for loading ramps * Loading ramps included * Loading area with rubber coating Weights: * Total weight: 18,000 kg * Payload: 13,150 kg * Unladen weight: 4,850 kg Other: * German vehicle Dcjbvpjvb Rvgjv Dlog * New HU possible on request New general inspections / safety inspections or weight reductions/additions are possible on request. We will be happy to assist you in obtaining export/transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Please contact us at ---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors excepted!----Who are we ? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Daily numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Completing customs formalities We are happy to help you with customs formalities.

Condition: new, overall weight: 43,000 kg, axle configuration: 2 axles, loading space length: 9,350 mm, loading space width: 3,000 mm, loading space height: 3,900 mm, Year of construction: 2021, Equipment: ABS, Technical data for EBERT TLS 43 ST special low loader: * Permissible fifth wheel load: 19,000 kg * Permissible axle load: 24,000 kg * Permissible total weight: 43,000 kg * Payload: approx. 32,200 kg * Low bed length: 9,350 mm Djbvpv Defiyuveljcg * Axle table length: 2,700 mm * External width: 2,550 mm * Loading edge/low bed: approx. 200 mm - 350 mm * Extra-wide signs at the front and rear with red/white signs Wheels: 245/70 R 17.5 Steering: TRIDEC Axles: 12,000 kg ? Gigant axles - hydraulically steered Electrics: * Use NATO spiral, power comes from the towing vehicle All-round light in the middle of the rear Side lights in LED design Standard rear light for vertical mounting (LC5) Hydraulics: * Hydraulic system on the raised bed for steering If you wish, we can make you a leasing or financing offer from Mercedes-Benz Bank., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: used, Year of construction: 2013, operating hours: 14,525 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: diesel, construction height: 2,750 mm, gearing type: automatic, Equipment: cabin, head guard, Linde forklift H50D-02 FIN: D50922 * 14,525 operating hours * Tires front and rear solid rubber * Camera front and rear * Duplex mast * Full cabin * Heating * Air conditioning * Deutz engine 85 KW * Load capacity 5 t * Lifting height 5.5 m Other: Dcebvpv Djrczhbjlog AU+FEM tests until 10/2024 * 1 previous owner New general inspections / safety tests or weight reductions / increases in load are possible on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sales of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them when buying or selling vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, Year of construction: 2020, operating hours: 2,260 h, Equipment: all wheel drive, Sennebogen 355 E, telehandler, year of construction: 2020, operating hours: only 2.260h, incl. grapple bucket 2.500l, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140hp/103kW], all-wheel and all-wheel steering (4x4x4) ? crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, level control, elevating cab 4,250mm, operating weight: 11,800kg, very good condition, ready for immediate use, On request we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! _____ Sennebogen 355 E, telehandler, year of construction: 2020, operating hours: only 2.260h, incl. 2.500l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4. 5-C165 [140hp/103kW], all-wheel drive and all-wheel steering (4x4x4) - crab steering, lifting capacity: 5.500kg, lifting height: 8.450mm, level control, elevating cab 4.250mm, operating weight: 11.800kg, very good condition, ready for immediate use, Dcebvevklruopv Dlsg On request, we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: new, overall weight: 11,900 kg, axle configuration: 2 axles, loading space volume: 6 m³, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 400 mm, total width: 2,550 mm, total height: 3,260 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic bevelled---- * Technical data: * Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm * Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm * Permissible. Total weight: 11,900 kg * Payload: approx. 9,100 kg * Wheelbase: 990 mm * Tires: 235/75 R17.5 inches * Loading height: approx. 920 mm * Drawbar length: approx. 1,800 mm * Coupling height: approx. 750-1,000 mm * Ramp angle: approx. 16° * Plank length: approx. 2,600 mm * Plank width: approx. 540 mm * 3 pairs of lashing rings, 3,000 kg per lashing point * Lashing rings sunk into the bridge floor * 7 pairs of lashing rings, 1,000 kg per lashing point * Lashing rings in the outer frame---- * Standard equipment: * Axles * Axles from well-known manufacturers * Suspension * Low-maintenance parabolic suspension with load compensation * Tires * Tires according to Manufacturer's choice on steel rim * Brake system * ABS brake system in accordance with ECE directive with ALB function * ABS plug connection ISO 7638 * Spindle parking brake * 2 interchangeable coupling heads red/yellow ISO 1728 * Towing device * Towing tube with DIN screw towing eyelet Ø 40mm, galvanized, infinitely adjustable via crank * Electrics * 24V lighting system with multi-chamber rear lights and LED side marker lights * 15-pin connector plug for lighting * Frame * Solid, welded and hot-dip galvanized frame * Rear area beveled, gradient 12° * Floor * Floor covering made of 40mm softwood planks * Side walls * Side walls made of anodized aluminum Debvpvjryhice Dljcg * Can be folded down to the side and removed * Galvanized corner stanchions, can be plugged in at the front and rear * Ramps * 2 foldable steel ramps, 1-piece, galvanized, can be moved sideways * Ramp jack 1 gas pressure spring per ramp * Ramp securing on rear stanchion * Ramp covering made of galvanized grating * Support * Reinforced 12 t geared support winch with load and fast gear * 2 telescopic folding supports on the left and right at the rear of the vehicle * Equipment * Steel fender with anti-spray mats * Side impact protection up to the 1st axle, foldable * 2 wheel chocks with holder * Contour marking on the side and rear * Space for a two-line license plate on the left ramp We can make you a leasing or financing offer on request. Mr. Seidel (Tel.  will be happy to assist you. You can find more information on our homepage. !!! Errors, changes and prior sale reserved!!!

Condition: new, overall weight: 2,700 kg, loading space length: 2,800 mm, loading space width: 1,300 mm, Year of construction: 2023, Brian James Cargo Digger Plant 2 (2,700kg), new vehicle without first registration, year of manufacture: 2021, dimensions of loading area: 2.80m x 1.30m, permissible total weight: 2,700kg, payload: 2,195kg, single ramps, spare wheel, excavator bucket holder, immediately available Price: 4,390.00 ¤ net / 5,224.10 ¤ gross Optional: Tracstrap load securing: 550¤ net Dcsbop N Hq Hjvpv Dlsg We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: new, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, Year of construction: 2023, Brian James Cargo Digger Plant 2 (3,500kg), new vehicle without first registration, year of manufacture: 2023, dimensions of loading area: 3.70m x 1.70m, permissible total weight: 3,500kg, payload: approx. 2,780kg, single ramps, spare wheel, excavator bucket holder, immediately available, Price: 5,990.00 ¤ net / 7,128.10 ¤ gross Optional: Tracstrap load securing: 550¤ net Dcjbvsp R Uq Ispv Dleg We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: used, Year of construction: 2021, operating hours: 998 h, Equipment: all wheel drive, Sennebogen 355 E, telehandler, year of construction: 2021, operating hours: only 998h!, incl. grapple bucket 2.500l, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140hp/103kW], all-wheel and all-wheel steering (4x4x4) ? crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, level control, elevating cab 4,250mm, operating weight: 11,800kg, very good condition, ready for immediate use, On request we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! Dcobvpv Djvklrhelog _____ Sennebogen 355 E, telehandler, year of construction: 2020, operating hours: only 998h! incl. 2.500l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4. 5-C165 [140 hp/103kW], all-wheel drive and all-wheel steering (4x4x4) - crab steering, lifting capacity: 5.500kg, lifting height: 8.450mm, level control, elevating cab 4.250mm, operating weight: 11.800kg, very good condition, ready for immediate use, On request, we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: used, Year of construction: 2023, operating hours: 360 h, load capacity: 3,500 kg, lifting height: 4,000 mm, fuel type: electric, gearing type: automatic, Equipment: cabin, NET: 68,890 EUR YEAR OF CONSTRUCTION: 2023 BSTD.: only 360 h JCB TELETRUK TLT35-22E - Fully electric industrial telescopic forklift truck - Lifting height: 4.00 m Load capacity: 3,500 kg - Available immediately & directly from the JCB dealer! - Dsbvpery Ngpjv Dlecg - CommandPlus - Operator's cab with heating, operator's seat with air suspension + heatable - Joystick control / single-lever control like wheel loader / telehandler - Load torque display with overload cut-off in accordance with EN15000 - LED lighting front and rear - Marathon Classic - lead-acid battery 80V 625 Ah incl. charging input for GNB charger - 1x charger GNB 3 phases - 2x additional hydraulics (1x ZVG / fork positioner, 1x sideshift) - Reversing warning device ?noise? - BlueSpot (optical warning device) - Pneumatic tires: Front 27x10x12 & Rear 21x8-9 >> Optional non-marking solid rubber tires - LiveLink - telemetry system hardware incl. remaining license - 1x FEM3A pallet fork with 1,200 mm forks - 1x Integrated fork positioner - 1x integrated sideshift - Factory warranty max. 3,000 h or until 30.05.2025 according to manufacturer's specifications - We are a JCB contractual partner (A-dealer) - The price is gross, including VAT. We expressly ask you to make an appointment before your visit. Do you need transportation? We work together with various transport companies. Unless otherwise stated: Used vehicles are sold without any guarantee or warranty. We are an authorized Mercedes Benz service partner, JCB contract partner, IVECO contract partner and MAGNI contract partner. Always over 700x trucks / commercial vehicles, used & new construction machinery, work platforms, forklifts, telehandlers and more! This offer is subject to change. Subject to errors and prior sale.

Condition: new, Year of construction: 2023, operating hours: 1 h, load capacity: 7,000 kg, lifting height: 5,400 mm, fuel type: electric, gearing type: automatic, Equipment: cabin, EP electric forklift EFL 702 electric forklift, year of manufacture: 2023, new vehicle, in stock & immediately available, rated load capacity: 7,000kg, lifting height: 5,400mm, sideshift, fork positioner, triplex mast with free lift, full cab, bluespot, rotating beacon, overall height: 3,150mm, incl. charger, non-marking tires, lithium-ion battery, fork length: 2,200mm, ready for immediate use! Debvpv Deqxn N Dolocg On request, we can make you a leasing or financing offer, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ EP electric forklift EFL 702 electro forklift, year of manufacture: 2023, brand new, on stock and ready for work, lifting capacity: 7.000kg, lifting high: 5.400mm, hydr. side shifter, hydr. adjustable forks, triplex boom, cabin, rotating beacon, bluespot, transport height: 3.150mm, included charger, non marking tires, Lithium-Ion battery, forks: 2.200mm, ready for work, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: new, overall weight: 43,000 kg, axle configuration: 2 axles, loading space length: 10,650 mm, loading space width: 3,040 mm, loading space height: 3,900 mm, Year of construction: 2021, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: * Permissible fifth wheel load: 19,000 kg * Permissible axle load: 24,000 kg * Permissible total weight: 43,000 kg * Empty weight according to DIN approx.: 12,500 kg * Low bed length i.L.: approx. 6,650 mm + 4,000 mm * Axle table length: 2,700 mm * External width: 2,550 mm * Loading edge/low bed: approx. 200 mm - 350 mm * Sliding table length: 500 mm * Widening/low bed to: 3050 mm * Low bed/telescopic by: 4,000 mm * B-dimension: 12,000 mm * Entire vehicle flame-spray galvanized, with epoxy resin primer and 2K paint * Extra-wide signage at the front and rear with red/white signs Wheels: 9x Michelin 245/70 R 17.5 X MULTI T VB 143J/146F  Steering: TRIDEC DLS with Tritronic  Axles: 12,000 kg ? DLS independent wheel suspension, hydraulically steered and hydraulically sprung High bed at the front: * Doors accessible from the outside in the corners on the left and right * Storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm * Spare wheel on the high bed, behind the partition on the right * Stairs on the right-hand side to get from the low bed to the high bed at the front * Hydraulic coupling for uncoupling on the left-hand side 6-way Multi-Faster coupling * 6 lashing positions 3,000 kg version outside on the high bed / drop lashing eyes) * 2 lashing positions 5,000 kg version at the top of the longitudinal strands (to the rear)  Low bed: * Climbing aids on the boom? Extension * Low bed can be telescoped by 4,000 mm and can be locked every 500 mm * With sliding table, can be locked every 250 mm * 28 lashing positions 10,000 kg, external version in the outer frame * 24 plug-in tubes 90x90, evenly distributed to widen the low bed to 3050 mm * 50 mm hardwood planks are laid between the extension tubes, 10 mm overhang  High bed at the rear: * High bed at the front is slanted and perforated, for retrofitting ramps, galvanized using adapters. * Ramp support profiles at the rear (Altec) ? C - rails * 6 lashing positions 10,000 kg version on the outside of the raised bed * 6 lashing positions 5,000 kg version in the excavator trough * 8 lashing positions 5,000 kg version for extra width in the outer frame * Closure of the excavator trough at the front and rear with a wooden base plate (plug-in)  Electrics: * Use NATO coil, power comes from the towing vehicle * Rotating beacon in the middle of the rear * Side lights in LED version * Standard rear light for vertical mounting (LC5) * Work light on the raised bed, to illuminate the low bed * Uncoupling: Sensor for safety and pressure switch for the suspension Air: * Aluminum air tank 60l (2x 10l, 2x 20l) * TEBS modulator * Locking pull-out left and right (valve on the side in the raised bed at the back) Dcjbofiyvhjvpv Dleg * Double release valve  Hydraulics: * Hydraulic system on the raised bed for steering, suspension and detachable gooseneck  Accessories: * 2x 4 wooden planks as a support for widening the low bed and intermediate table * 2 safety wedges for uncoupling * 4 wheel chocks On request, we can make you a leasing or financing offer from Mercedes-Benz Bank., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, first registration: 08/2006, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Dcjbvpv Delhn Afjljg Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: new, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,700 mm, Year of construction: 2023, Brian James General Plant (3,500kg), new vehicle without first registration, tiltable loading area, perfect for scissor lifts and storage technology, year of manufacture: 2023, dimensions of loading area: 3.10m x 1.70m, permissible total weight: 3,500kg, payload: 2,790kg, perforated steel ramp, spare wheel, immediately available, Dsbvpv Djqd Ir Nslocg Price: 6,590.00 ¤ net / 7,842.10 ¤ gross We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: used, Year of construction: 2022, operating hours: 248 h, Equipment: all wheel drive, JCB 403 - COMPACT WHEEL LOADER / YARD LOADER Year of manufacture: 2022 Engine power: Kubota 25HP Operating weight: approx. 2,600 kg - Tires 31 x 15.50 - 15 BKT - construction profile - wide, - Standard lifting frame, - 1 additional circuit manual control via joystick and additional lever (e.g. folding bucket), - 20 km/h version, axles with 100% differential lock in front and rear axles Djbvpv Djupu Hbolscg - TÜV approval - Hydraulic quick coupler type Weidemann, - 3rd control circuit for hydraulic attachments - 2 halogen work lights at the front and 1 reversing light, - 160kg additional weight - original under the rear axle - incl. pallet fork and standard bucket On request, we can make you a leasing or financing offer from JCB Finance., Mr. Ebert (Tel. will be happy to assist you., Further information can be found on our homepage., Errors and prior sale reserved!

Condition: used, first registration: 05/2019, If you have any questions about the vehicle, please contact Mr. Seidel (tel. ). ---- Ressenig SATL2-400.1 telescopic machine low loader ----Young used semi-trailer - telescopic with 2 hydraulically steered 12 tonnes - axle lines * Manufacturer: Ressenig (A) * Low bed length: approx. 5,500 mm retracted approx. 8,500 mm telescoped * First registered: * Gross vehicle weight: 42,000 kg * Fifth wheel load: 18,000 kg * Rear axle load: 24,000 kg * Total length: approx. 12,860 mm retracted approx. 15,860 mm telescoped * Empty weight: 13,180 kg * Payload: 28,820 kg * Width: 2,550 mm---- * Axles: * DL-S axle lines 12 tons, Tridec independent wheel suspension, hydraulically sprung, hydraulically steered. * Radio remote control for steering and air suspension---- * Tires: 245/70 R 17.5 * Brake system: BBA - compressed air, EBS, spring accumulator on both axles * Low bed: telescopic by 3 meters from 5.50 m to 8.50 m * Ramps: electro-hydraulic---- * Other equipment: * Yellow rotating beacon Dcsbvsukk S Ajpv Dlsg * Spare wheel * Aluminum bridges for insertion in the telescopic low bed * Red/white pull-out panels for transporting extra-wide vehicles We can make you a leasing or financing offer on request. Mr. Seidel (Tel.  will be happy to assist you. You can find further information on our homepage. !!! Errors, changes and prior sale reserved!!!

Condition: used, Year of construction: 2018, operating hours: 2,812 h, Equipment: all wheel drive, Magni RTH 6.35 SH telehandler, year of manufacture: 2018, operating hours: only 2,812h! 1st hand, quick coupler, pallet fork, radio remote control, workman basket preparation, 3rd hydraulic circuit, air conditioning, pressurized cab, radio/CD, touch screen display, ROPS/FOBS cab, engine: Mercedes-Benz [170kW/231hp], EPA sticker on engine, automatic levelling, variable outriggers, 20km/h (optional 40km/h), max. lift height: 34.90m, outreach: 27.00m, maximum lifting capacity: 6.000kg, weight: 23.950kg, good condition, ready for immediate use! Optional against surcharge:, - Workman basket, - winch 1,5to to 6to, - load hook, - shovel, On request, we can make you a leasing or financing offer, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ Magni RTH 6.35 SH telescopic handler, year of construction: 2018, working hours: only 2.812h! only one owner, quick coupler, pallet fork, radio remote control, preparation for work platform, 3rd hydraulic circuit, air conditioning, overpressure cabin, radio/CD, touch screen display, ROPS/FOBS cab, engine: Mercedes-Benz [170kW/231HP], EPA sticker, automatic leveling, variable outriggers, 20km/h (optional 40km/h), maximum lifting height: 34.90m, horizontal reach: 27.00m, maximum lifting capacity: 6.000kg, weight: 23.950kg, very good condition, ready for work! Djbornfvnjvpv Dlecg Optional extra charge :, - work basket, - winches 1,5to to 6to, - load hook, - bucket, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low loader, continuous level low bed, self-supporting design, gross vehicle weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions 14,000 mm x 2,550 mm (also available in wide version), full air suspension, last axle self-steering, SAF axles, Mr. Ebert (Tel.) will be happy to assist you, For further information please visit our homepage, Errors and prior sale excepted! Dcsbvpv Dofiyvnoleg

Condition: new, axle configuration: 3 axles, Equipment: ABS, Ebert TL 30 ST special low loader, continuous level low bed, self-supporting construction, permissible total weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions 12,000 mm x 2,550 mm (also available in long + wide version), full air suspension, last axle self-steering, SAF axles, Mr. Ebert (phone) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! Dobofiyvpsvpv Dljcg

Condition: new, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, Year of construction: 2023, Brian James Cargo Digger Plant 2 (3,500kg), new vehicle without first registration, year of manufacture: 2022, loading area dimensions: 3.20m x 1.70m, permissible total weight: 3,500kg, payload: 2,818kg, single ramps, spare wheel, excavator bucket holder, immediately available, Price: 5,690.00 ¤ net / 6,771.10 ¤ gross Optional: Tracstrap load securing: 550¤ net Debvpv Dep N Dudjlecg We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!

Condition: used, Year of construction: 2008, operating hours: 201 h, load capacity: 3,000 kg, lifting height: 3,310 mm, fuel type: diesel, Hubtex MQ 30 D (3060) four-way sideloader, year of manufacture: 2008, hours: only 201h!, previous owner: German Armed Forces, rated load capacity: 3,000kg, load center 700mm, lifting height: 3,310mm, cab, rated power diesel engine: [42kW/57hp], weight: 8,200kg, very good condition!, ready for immediate use! On request we can make you a leasing or financing offer, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Errors and prior sale excepted! _____ Hubtex MQ 30 D (3060) Multidirectional Sideloader, year of manufacture: 2008, working hours: only 201h!, former owner: German military (Bundeswehr), lifting capacity: 3.000kg, LSP: 700mm, lifting high: 3.310mm, cab, diesel engine: [42kW/57HP], weight: 8.200kg, very good condition!, ready for work, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you., For more information, visit our homepage., mistakes and prior sale reserved! Djbsuzcw Hevpv Dlscg

Condition: used, Year of construction: 2020, operating hours: 1,976 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, Manitou MI 25 G gas forklift, year of manufacture: 2020, hours: only 1,976h!, rated lifting capacity: 2,500kg, lifting height: 4,700mm, triplex mast, hydr. sideshift, full cab, 4th control circuit, engine: [35kW/48hp], weight: 4,185kg, fork length: 1,200mm, fork extension: 2,000mm, overall height: 2,200mm, good condition, ready for immediate use! On request we can make you a leasing or financing offer, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Errors and prior sale excepted! _____ Manitou MI 25 G gas forklift, year of manufacture: 2020, working hours: only 1.976h!, rated capacity: 2.500kg, lifting high: 4.700mm, triplex boom, hydr. sideshifter, cabin, 4. hydralic valve, engine: [35kW/48HP], weight: 4.185kg, forks: 1.200mm, forkextension: 2.000mm, transport height: 2.200mm, good condition!, ready for work, Dsbvpvsucia Us Dlscg Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: used, Year of construction: 2013, operating hours: 748 h, load capacity: 3,000 kg, lifting height: 3,310 mm, fuel type: hybrid, Hubtex MQ 30 H (3060) four-way sideloader, year of manufacture: 2013, hours: only 748h!, previous owner: Bundeswehr, new battery in 03/2022, hybrid: diesel operation or electric operation possible, nominal load capacity: 3,000kg, load center 700mm, lifting height: 3,310mm, cabin, rated diesel engine power: [44.7kW/61HP], rated electric motor power: [23kW/31HP], weight: approx. 10,000kg, including charger, very good condition!, ready for immediate use!, We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Subject to errors and prior sale! _____ Hubtex MQ 30 H (3060) Multidirectional Sideloader, year of manufacture: 2013, working hours: only 748h!, former owner: German military (Bundeswehr), new battery at 03/2022!, hybrid: diesel and electric drive possible, lifting capacity: 3,000kg, LSP: 700mm, lifting high: 3,310mm, cab, diesel engine: [44.7kW/61HP], electric engine: [23kW/31HP], weight: approx. 10,000kg, incl. charger, very good condition!, ready for work, Dcebvpv Derqx Uljljg Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you., For more information, visit our homepage., mistakes and prior sale reserved!,