Used Quappen Loader A27X for sale (4,754)

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2023, operating hours: 8 h, General information Year of manufacture: 2023 Technical information Number of cylinders: 4 Engine capacity: 2.400 cc Steering: skid steer Engine type: Bobcat DM02VB Empty weight: 3.271 kg Dimensions (LxBxH): 270 x 165 x 220 cm Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Colq Hhweucviisworb Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: USA Condition CE type: CE Hand/Feet controls, Extra Counterweights, 2 speed, High Flow, Airconditioning

Condition: good (used), first registration: 03/2011, Year of construction: 2011, Brand of the body: GOLDHOFER STHP/XLE 8 (3+5) LOWLOADER Crslq Hhevfnyqowwsb Extendable body: Yes Technical condition: good Visual condition: good

Condition: used, lifting height: 7,000 mm, Year of construction: 2017, operating hours: 2,290 h, load capacity: 3,099 kg, Equipment: cabin, JCB 531-70 Year of manufacture 2017 2,290 hours new tires 3 control circuits 3 steering modes - front wheel, crab steering, all-wheel drive Lifting height 7 m Load capacity 3.1 tonnes Price €36,900.00 net Available for an additional charge Earth bucket €1,390.00 net Lightweight bucket 2 m³ €1,950.00 net Cjlqsv Aq Eds Hhwworb Lightweight bucket 2.7 m³ €2,150.00 net Lightweight bucket with double scraper bar (reversible blade) 2 m³ €2,250.00 net Lightweight bucket with double scraper bar (reversible blade) 2.7 m³ €2,450.00 net For JCB or Manitou, Claas, Merlo Small work basket 1.2m wide €990.00 net Large work basket 2m wide €1,550.00 net Viewing possible at any time, by telephone appointment. All information without guarantee.

Condition: new, overall weight: 106,000 kg, maximum load weight: 83,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. GOOSENECK * in SNT design to optimize the loading area length * Length approx. 3,750 mm, with beveled corners at the front approx. 400 x 400 mm and beveled at the rear approx. 850 mm x 10° * Can be raised and lowered hydraulically, stroke +- 250 mm * Incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles * Steel front wall, pluggable, approx. 400 mm high * Checkered plate covering above the gooseneck * Aluminum side walls pluggable on the gooseneck, approx. 400 mm high, in anodized design Celqeu Irnbj Hhwwsrb * 3.5 inch kingpin * 4 pairs of additional screwable lashing rings (LC 5,000 daN) * 1 INOX tool box, one-piece, approx. 2,480 x 340 x 390 mm (L x W x H), outside in a beveled design approx. 45°, with 2 side doors on the outside and 1 cover on top, behind the front wall on the gooseneck LOADING AREA * in extendable design, length approx. 11,000 mm, with bevel at the rear approx. 500 mm x 10° * A recess in the loading area and in the bevel protruding to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm (L x W x H) PA-X axle system * all axles hydro-mechanically forced steered Tires * 245/70 R 17.5 3PMSF load index 143/141L(146/146F) Loading area * Continuous sheet metal covering on the loading area with a painted layer of sand as anti-slip protection * 1 intermediate table, approx. 500 mm wide, for the extension, with long holes for hanging and movable bridging elements * Painted sand coating on the support surfaces of the intermediate table * Mechanical locking for locking the intermediate table on the extension * Locking of the loading area with conical welded locking profiles on the first approx. 3,000 mm extension every approx. 125 mm, then every approx. 500 mm * Long holes for hanging and movable bridging elements on the fixed part behind the gooseneck on the front of the loading area * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 3 pairs of hanging lashing rings (LC 10,000 daN) inside the dipperstick recess * 8 pairs of stake pockets embedded in the outer frame of the loading area, for plug-in stakes approx. 100 x 50 mm extensions (galvanized) extendable by approx. 230 mm per side (without wooden planks) * Control valves for the hydraulic ramps on the right side of the vehicle * Square climbing rails approx. 15 x 30 mm on sheet metal covering, every approx. 150 mm on the slope of the loading area * 1 pair of mechanical rear supports * A 7-pin socket on the end crossbar * Central lubrication system with 2 pumps, brand BEKAMAX, with normal grease according to NLGI-2, removable protection around the central lubrication pumps * Steering can be operated from the front and rear using a cable remote control, with alignment control of the axles, without installation in the tractor unit * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches, without installation of the supply connections on the tractor unit * Widening planks, loose, in reinforced steel U-frame * Screwable container locks for PA-X loading areas, suitable for 1 x 20', 1 x 30', 1 x 40' or 1 x 45' container * Including 4 Wader container locks and M42 + M30 fastening screws * 1 LED rotating beacon on the left and right at the rear of the vehicle * One LED reversing light on the left and right at the rear of the vehicle * Round NATO socket on the fron

Condition: used, Year of construction: 2000, operating hours: 10,889 h, Equipment: Year of manufacture 2000, 9,000 kg weight 63kw Cab Driver's suspension seat Rehnen pallet fork FEM 38 year of manufacture 2018 with 4,100 kg load capacity German machine Ready for immediate use Your reliable partner for everything to do with automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz since 1971. The Behnke Commercial Vehicle Center always has around 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We offer you ongoing attractive financing options at favorable special conditions. If you are interested, we would be happy to make you an individual offer! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Crslq Hhweuqgwuewsb The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed properties. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, Year of construction: 1997, operating hours: 6,799 h, load capacity: 3,500 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Stacker F 35 U Empty weight: 5200 kg With gas and gasoline Very good condition Sideshift Trade-in + exchange is possible Would you like to trade-in or exchange your old vehicle? We are happy to buy your old vehicle at the market price. Just send us the details of the vehicle by e-mail or give us a call. Registration service: We are happy to help you apply for short-term license plates and export plates. Despite careful data recording and evaluation of the vehicle, there may be deviations in the equipment data, scope of delivery and technical data. The information is intended to present the vehicle and is not binding. Cslq Hhwjulli Ejwsrb Subject to prior sale and errors excepted. The description serves the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is decisive.

Condition: new, Year of construction: 2024, operating hours: 9 h, Schäffer 4670 Z with cabin Kubota diesel engine V2403 CR-T with 66 HP technical data: Lifting height (tool pivot point) 3,260 mm Tipping load straight, with pallet fork 1,823 - 2,149 kg Empty weight 3,520 kg Equipment: Cjlq Hhev Aqvcswwjrb Lighting system Armrest right Standard DW connections electrical via button Pressureless return Hydraulic connection plug-in couplings Locking latch electrical additional control unit Additional control unit electrical. ELPRO Case weight 170 kg TÜV certificate self-propelled work machine Towing device with bolts and lashing eyes Cyclone pre-filter Battery main switch Towing device with towing eye 3-pin electrical socket Tires 33x15.5-16.5 SKD EURO mount with hydraulic locking | Internal no.: 11136621

Condition: used, power: 75 kW (101.97 HP), Year of construction: 2010, operating hours: 6,125 h, Operating hours: 6125, First registered: July 26, 2010_____Claas 6030 Scorpion for sale on behalf of a customerLifting capacity 3,000 kgLifting height 6,050 mmEngineManufacturer DeutzType TD 2011 L04Power at 2,400 rpm (ISO 14396) kW/HP 74.9/102Max. Torque at 1,600 rpm Nm 350Cylinders 4Displacement cm³ 3,620DriveGearbox VariopowerWorking speeds km/h 0-15/0-40Top speed km/h 40Tank volumesDiesel l 120Hydraulics l 105AxlesFront/rear planetary steering axlesDifferential lock front self-locking 45%Steering angle max. 45 degreesSteering types all-wheel, front wheel, crab steeringWorking hydraulicsType LS pump, LS valvePerformance 135l/240 barDimensionsLength including tool frame mm 4,570Maximum width mm 2,250Track width mm 1,860Height to cab roof mm 2,210Inner width of cab mm 920Turning radius over the wheels mm 3,700Ground clearance mm 415WeightsEmpty weight kg 5,600Permissible total weight kg 8,500Subject to errors and prior sale,Storage location:null Celet E Emqeq Hhwwsrb

Condition: used, lifting height: 12,000 mm, Year of construction: 2014, operating hours: 5,200 h, load capacity: 3,500 kg, Equipment: air conditioning, cabin, JCB 535-125 Year of manufacture 2014 5,200 hours 110 HP Air conditioning New service and turbo 3 control circuits 3 steering modes - front wheel, crab steering, all-wheel drive Lifting height 12.5 m Colqov Aq Eqs Hhwwjrb Load capacity 3.5 tonnes Price €31,900.00 net Available for an additional charge Earth bucket €1,390.00 net Light material bucket 2 m³ €1,950.00 net Light material bucket 2.7 m³ €2,150.00 net Light material bucket with double scraper bar (reversible blade) 2 m³ €2,250.00 net Light material bucket with double scraper bar (reversible blade) 2.7 m³ €2,450.00 net For JCB or Manitou, Claas, Merlo small work basket 1.2m wide €990.00 net Large work basket 2m wide €1,550.00 net Viewing possible at any time, by telephone appointment. All information without guarantee.

Condition: new, overall weight: 73,000 kg, maximum load weight: 57,740 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * in SNT design to optimize the loading area length, length approx. 3,700 mm * Gooseneck at the rear with bevel approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area * Telescopic loading area, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° Axles and suspension * BPW axles and suspension, 1st axle with pre-steering, with electro-magnetic reversing lock * all other axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 235/75 R 17.5 3PMSF twin tires Brake system * WABCO EBS-E brand in accordance with EU regulations Paint * 6-component final treatment: complete steel construction shot-blasted after welding * 1 layer of zinc-based base paint, 1 layer of adhesion primer * Final painting with 2 layers of 2-component paint (acrylic) in one color, then sealing of the cavities with special wax * Trailer color RAL 3002 carmine red Accessories included * Steel bulkhead, pluggable, approx. 400 mm high * Two 7-pin sockets on the front connection panel * 1x NATO BLACK 24N connection in accordance with ISO 11851x NATO WHITE 24S connection in accordance with ISO 3731 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for Control of the hydraulic processes, with the exception of hydraulic cable winches, without installing the supply connections on the tractor unit * Parking position on the gooseneck for the warning signs when not in use * 1 mounting adapter for e-bike in front of the front wall of the gooseneck (without e-bike) * Outer support of the gooseneck with mounting holes for screwable lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screwable lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * On the gooseneck 1 pair of plug-in aluminum side walls on the side, approx. 400 mm high, in anodized design * On the gooseneck a plug-in aluminum rear wall, approx. 400 mm high, in anodized design * Above the gooseneck approx. 40 mm thick hardwood flooring * Checkered sheet metal flooring above the kingpin * 2 inch kingpin Colq Hjvmalhehwwerb * Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide * Mechanical seat posts with 2-speed gearbox and crank. JOST Module B - static test load = 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, interrupted between the axles on the loading area (increasing the coefficient of friction) * Locking of the loading area with conical welded locking profiles approx. every 500 mm * Long holes for hanging and movable bridging elements on the front of the loading area * 1 movable intermediate table, approx. 300 mm wide, for the pull-out tube with a large cross-section, with checkered sheet covering, front and rear with long holes for hanging and movable bridging elements * 1 pair of lashing rings on the crossbar at the front (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm each side (without wooden planks) * Steering can be operated from the front and rear using a cable remote control via push buttons, with tracking control of the axles, without installation in th

Condition: used, Year of construction: 2006, operating hours: 9,237 h, Equipment: all wheel drive, Equipment: Year of manufacture: 2006 Operating hours: 9,236 hours Power: 157 kW / 213 HP Weight: 19.8 t Tires: Michelin 23.5-25X Type A approx. 60% Rear view camera Steering wheel control Air conditioning Tow bolts Central lubrication system Swing seat, Radio preparation, 1 previous owner, German machine, CAT service booklet maintained, last service at 9,003 hours Since 1971 your reliable partner for everything to do with automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz. The Behnke Commercial Vehicle Center always has around 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We continually offer you attractive financing options at favorable special conditions. If you are interested, we would be happy to make you an individual offer! Cslq Hhju D Uvyewworb Trade-in of your commercial vehicle/construction machine is desired. If a new TÜV inspection is desired, we would be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, price tags and images are non-binding descriptions and do not serve as guaranteed properties. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale reserved.

Condition: used, Year of construction: 1999, operating hours: 7,835 h, load capacity: 3,000 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Stacker A 30 U Empty weight: 4100 kg With gas and gasoline Very good condition Sideshift Trade-in + exchange is possible Would you like to trade-in or exchange your old vehicle? We are happy to buy your old vehicle at the market price. Just send us the details of the vehicle by e-mail or give us a call. Csloulltweq Hhwworb Registration service: We are happy to help you apply for short-term license plates and export plates. Despite careful data recording and evaluation of the vehicle, there may be deviations in the equipment data, scope of delivery and technical data. The information is intended to present the vehicle and is not binding. Subject to prior sale and errors excepted. The description serves the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is decisive.

Condition: new, overall weight: 54,000 kg, maximum load weight: 44,500 kg, axle configuration: 3 axles, loading space length: 9,000 mm, Equipment: ABS, We build according to your wishes, just as you need it for your work. Axles: ÖZ KOC-Trax, 12 tons per axle or BPW SAF axles With loading ramp, steering axle, widening. With German approval EC 2007/46, EEC conformity Write to us with your wishes so that we can create an individual offer for you Prices change depending on the order We sell tires and rims for Crjlq Hhevm I Nbewwob trucks & trailers Brands: Fulda + Bridgestone + PetlasSizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 If not in stock, delivery time 7 to 11 weeks We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailer Tarpaulin trailer Silo trailer

Condition: used, lifting height: 9,000 mm, Year of construction: 2018, operating hours: 1,780 h, load capacity: 3,500 kg, Equipment: air conditioning, cabin, JCB 535-95 Coljv Aq Eksq Hhwwerb Year of manufacture 2018 1,780 hours AC air conditioning Joystick JCB engine Eco Max 4.4 liters without DPF or exhaust aftertreatment Michelin tires 3 control circuits 3 steering modes - front wheel, crab steering, all-wheel drive Lifting height 9.5 m Load capacity 3.5 tonnes Price €48,900.00 net Available for an additional charge Earth bucket €1,390.00 net Light material bucket 2 m³ €1,950.00 net Light material bucket 2.7 m³ €2,150.00 net Light material bucket with double scraper bar (reversible blade) 2 m³ €2,250.00 net Light material bucket with double scraper bar (reversible blade) 2.7 m³ €2,450.00 net For JCB or Manitou, Claas, Merlo Small work basket 1.2m wide €990.00 net Large work basket 2m wide €1,550.00 net Viewing possible at any time, by telephone appointment. All information without guarantee.

Condition: new, overall weight: 38,000 kg, maximum load weight: 25,600 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * Gooseneck Light, length approx. 4,080 mm * Gooseneck can be raised/lowered hydraulically and moved away * For tractor units: 4 x 2 and 6 x 2 Crslqorymppe Hhwwob Low bed * Low bed designed as a telescopic excavator bridge with extension at the front and with mechanical locking. Length x width approx. 6,350 mm x 1,300 mm Rear chassis * Rear chassis in short version with closed outer frame and checker plate cover with excavator trough, this is closed in the rear half to accommodate the air tanks Axles and suspension * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Axle tool Tires * 235/75 R 17.5 3PMSF twin tires * Load index 143/141J (144/144F) Brake system * WABCO EBS-E brake system in accordance with EU regulations * Without connection cable to the tractor unit Paintwork * 6-K final treatment * Complete steel construction after welding shot blasted * 1 layer of zinc-based base paint, 1 layer of adhesion primer * Final coat with 2 layers of 2-component paint (acrylic) in single color RAL 3002 carmine red, then sealing of the cavities with special wax. Rims in silver Accessories included * Steel bulkhead, pluggable, approx. 400 mm high * Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches * 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) * 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the bulkhead and at the rear on the gooseneck * 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck * On the gooseneck 2 pairs of pluggable ALU side walls, approx. 400 mm high, in anodized design * On the gooseneck a pluggable aluminum back wall, approx. 400 mm high, in anodized design * Above the gooseneck approx. 12 mm thick Delignit coating * 2 inch kingpin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air pistol on the gooseneck * Possibility to climb onto the gooseneck * 2 pairs of stake pockets embedded on the gooseneck, for stakes approx. 100 x 100 mm * On the inner tube on the outside, threaded holes for mounting screwable lashing rings M24 (LC 8,000 daN) * 2 pairs of screwable lashing rings M24 (LC 8,000 daN) included * On the upper belt on the outside approx. every 1,200 mm, attachment option ø26 mm for screw rings (LC 8,000 daN) * 10 pairs of lashing rings on the RBS-5 outer beam (LC 10,000 daN), under and between the extensions * Foldable, extendable extensions, lockable at approx. 2,550/2,750/3,000 mm, split-design wooden mattresses, with wooden flooring * Bevel at the front of the chassis, approx. 350 mm x 12°, including integrated hanging rails at the front and rear for loose docking ramps * 2 pairs of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * 3 pairs of recessed lashing rings in the outer frame of the chassis, foldable outwards: 1 pair each at the front and rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) * 2 pairs of LBS-3 lashing rings (LC 6,000 daN) welded above the wheel arch on the rear chassis * S

Condition: used, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2019, Equipment: ABS, Low loader Lecitrailer Newly built Top condition Colq Heullltjhwworb

Condition: new, axle configuration: 3 axles, Equipment: ABS, Endings according to wunch Axles Trax Surcharge SAF/BPW Attachment to the gooseneck Hidraulic Write us your wishes, so that we can make you an individual offer We finance, rent and lease If not in stock delivery time 7 to 9 weeks We sell tires and rims for trucks & trailers Cslq Hhol Hzkgswwerb brands:Fulda+Bridgestone+Petlas We build the following trailers Container chassis all types Low loaders Tipping skips Tank trailers Tarpaulin trailers Silloaufliger

Condition: new, overall weight: 63,000 kg, maximum load weight: 48,300 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck Gooseneck with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area in double extendable version * Loading area in double extendable version with rear bevel approx. 500 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Cut-outs in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the Axles Checkered plate covering Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires Tires 245/70 R 17.5 3PMSF, load index (146/146 F) Seatposts JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Braking system * Braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Painting * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Crslqsvchnie Hhwweb Steel construction * Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system Electrical system in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Incl. the following additional equipment * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * A spare wheel holder in front of the bulkhead * Electro-hydraulic unit * Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles (without installation in the tractor unit) * TPMS tire pressure monitoring system in accordance with ECE R 141 * Load gauge for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (body length approx. 2,560 mm) * A galvanized toolbox, integrated in the beveled gooseneck * 4 pairs of WADER container pockets in the loading area for a 20', 2x 20', 40 or a 45' container * 7 pairs of stanchion pockets for stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Movable hanging rails for aluminum docking ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition * Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and

Condition: used, Year of construction: 2007, operating hours: 3,000 h, fuel type: diesel, gearing type: automatic, Equipment: head guard, Palfinger F3 150 truck-mounted forklift Own weightfrom 1,580 kg (without forks)max. Crslq Hhsullmwswwob Lifting height 2,200 - 3,100 mmmax. Lifting capacity/load capacity1,500 kg / 600 mm Engine 3-cylinder diesel engine

Condition: new, overall weight: 42,000 kg, axle configuration: 2 axles, Equipment: ABS, Write to us with your wishes so that we can create an individual offer for you We sell tires and rims for trucks and trailers of the brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5                                385 / 55 ? 22.5                                385 / 65 ? 22.5 We build the following trailers Colq Hhwjl Hzlaewsrb Container chassis all types Low loader Tipper bodies Tank trailers Tarpaulin trailers Sillo trailers

Condition: new, overall weight: 73,000 kg, maximum load weight: 58,760 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * in extendable version with rear bevel approx. 500 mm x 8° * 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checkered sheet flooring above the axles Two-part steel ramps * A pair of galvanised two-part steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering. Ramp with hydraulically foldable and unfoldable ramp parts * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Axles * BPW axles and suspension, 1st axle with leading steering, 2nd and 3rd axles rigid, 4th and 5th axles with trailing steering, air suspension, with lifting/lowering function, drum brakes * Trailing steering axles with electro-magnetic reversing lock, can be activated via reverse gear or manually * Technical axle load: 12,000 kg each Tires * 235/75 R 17.5 3PMSF Seatposts * JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Braking system * Wabco Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Cjlq Hevcvizshwwjrb Steel construction * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Incl. the following additional equipment * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Mount in the rear area of the gooseneck for aluminum docking ramps * A bracket for a rotating beacon at the rear of the trailer * Galvanized Supports under the slope of the loading area * Super Grip 25 rubber covering in the slope of the loading area * Cover plates to bridge the space between the ramps and the loading area * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * Electro-hydraulic unit at the rear, under the loading area * A holder for the warning signs on the left and right of the gooseneck and on the rear panel, including a socket * TPMS tire pressure monitoring system in accordance with ECE R 141 * Load gauge for determining the axle loads, including load diagram * Aluminum side walls and rear wall on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) * A galvanized tool

Condition: new, overall weight: 59,000 kg, maximum load weight: 41,600 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * in SNT design to optimize the loading area length, length approx. 3,750 mm * Gooseneck can be raised/lowered hydraulically and removed * Technical fifth wheel load: 34,000 kg. For tractor unit: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low bed * designed as a telescopic tank bridge in low construction, with extension at the front and mechanical locking * Length x width approx. 7,550 mm x 2,740 mm Chassis * with closed outer frame at the rear * Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Brake system * WABCO EBS-E brand in accordance with EU regulations Axles and suspensions * PENDEL-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic Axle compensation Tires PA * 245/70 R 17.5 3PMSF * Load index 143/141L(146/146F) Paintwork, color of the trailer * RAL 3002 carmine red Accessories included Celeuzdf Sjq Hhwwerb * Steel bulkhead, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches * Outer support of the gooseneck with mounting holes for screwable lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screwable lashing rings included (LC 5,000 daN) * 1 lashing ring on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Checkered sheet metal covering above the gooseneck * 3.5 inch king pin * Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * 1 pair of steel ramps with climbing rails and fastening bolts to bridge the hooks of the low bed * Fastening option for the steel ramps at the rear between the outer supports of the gooseneck * 1 lashing ring on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 (LC 8,000 daN) * 2 pairs of screw rings M24 (LC 8,000 daN) Other accessories included * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, inwards and foldable on the outside (LC 10,000 daN) * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screwable rings M24 (LC 8,000 daN) * 1 pair of screw rings M24 (LC 8,000 daN) included * Preparation for mounting screwable container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks * Mechanical bolt-tab coupling from the low bed to the chassis, for changing the loading area or installing extension supports * With electro-pneumatic-hydraulic couplings * Hanging bar at the front of the rear chassis to the low bed for loose docking ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator trough of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator trough in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator trough of the rear chassis (LC 10,00

Condition: new, overall weight: 50,960 kg, maximum load weight: 39,720 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area Loading area in extendable version * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checkered sheet metal flooring above the axles Seat supports * JOST (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two axles rigid, two axles self-steering, with drum brake * Air suspension with lifting/lowering function * Self-steering axle with electro-magnetic reversing lock, can be activated via reverse gear or manually * Tires: 205/65 R 17.5 Braking system * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa)S690QL/S700MC (yield strength 690MPa) Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) coating Zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear part metallized and painted in RAL 9010 (pure white) * Rims in silver Crolq Hhju Sd U Ujwwsb Accessories included * 2 inch kingpin * A galvanized steel bulkhead approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Mount in the rear area of the gooseneck for aluminum docking ramps * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right * TPMS tire pressure monitoring system in accordance with ECE R 141. The data is transferred to the towing vehicle via the standardized EBS interface according to ISO 11992. For correct display, the towing vehicle must be able to transfer and display this data. * On the gooseneck aluminum side walls and rear wall, pluggable, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in stanchions are removable. (Length of the body approx. 2,560 mm) * A galvanized toolbox, integrated in the beveled gooseneck * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' container or 1 x 40' container * Movable hanging rails for aluminum docking ramps at the rear of the vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * A galvanized bracket across the loading area * Galvanized extensions, extendable by approx. 230 mm on each side * Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * 1 pair

Condition: new, overall weight: 43,000 kg, maximum load weight: 30,235 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Extract from the equipment * Chassis with excavator trough * Low bed with central carrier in extendable version, length approx. 6,000 mm Gooseneck * Hydraulically raised/lowered, and can be driven off Axles * BPW axles * Hydro-mechanically forced steering Brake system * Wabco in accordance with EU regulations with EBS-E (2S2M) Air suspension * With raising and lowering valve Tires * 245/70 R 17.5 3PMSF load index (146/146F) Incl. accessories * 2 inch kingpins * 1 pair 1pc. Steel ramps for forestry machines, approx. 2,000 x 700 mm, with hydraulic lifting mechanism * A galvanized steel front wall, approx. 400 mm high * Steering can be operated from the front and rear using a cable remote control via push buttons * Electro-hydraulic unit * Load pressure gauge for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approx. 2,440 x 400 mm (L x H) * Hydraulic connections from the gooseneck to the low bed with multi-coupling * 1 pair of galvanized steel docking ramps with climbing strips from the low bed to the chassis * A painted layer of sand on the loading area as anti-slip protection Crolq Hhwjrirzqewjb * 2 LED reversing lights mounted on the rear panel * Central lubrication system with 2 BEKAMAX (Pico) pumps * An acoustic warning signal when reversing Painting * HRM metallization (High Resistance Metallisation) * Single-colour paintwork in MB 7350 nova grey

Condition: new, overall weight: 48,000 kg, maximum load weight: 33,865 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick * Loading area in double extendable version * Loading area in double extendable version with rear slope approx. 500 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, checkered sheet metal flooring above the axles * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with Lifting and lowering valve * Axle tool Tires * Tires 245/70 R 17.5, load index (146/146 F) Seatposts * JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Braking system * Braking system in accordance with EU regulations with EBS-E (2S2M) * Without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel construction * Steel construction made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa) and S690QL/S700MC (yield strength 690MPa) Electrical system * Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection according to ISO * 24N ISO-1185 * 24S ISO-3731 * 15-pin ISO-12098 Incl. the following additional equipment * 2" inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * A spare wheel holder in front of the bulkhead * Electro-hydraulic unit Crelqsvmczle Hhwweb * Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles (without installation in the tractor unit) * Cable for supplying the electro-hydraulic unit and/or the electric cable winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between the trailer and the tractor unit with plug connection (ANDERSON-ANDERSON) * Mounting in the rear area of the gooseneck for aluminum docking ramps * European reflector signs (red-yellow) on the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right * Hanging rail for aluminum docking ramps at the rear of the vehicle * A bracket for a rotating beacon at the rear of the trailer * Galvanized folding supports under the slope of the loading area * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed sticker 80 km/h rear and both sides * Load pressure gauge for determining the axle loads including load diagram