Used Maho for sale (515)

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 500mm/420mm/380mm, table dimensions X/Y: 500mm/380mm, max. table load: 200kg, speed: 18000rpm, tool holder: SK40, tool positions: 30, rapid traverse X/Y/Z: 50m/min, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2500mm, weight: approx. 6000kg. The table of the machine has an inclination error. Documentation available. On-site inspection is possible. Celev R Ex Uoim I Arsgt

Condition: good (used), CNC MACHINING CENTER MAHO MH 700 S - Stroke X axis: 700 [mm] - Stroke Y axis: 500 [mm] - Stroke Z axis: 600 [mm] - Spindle stroke: 80 [mm] - Spindle speed: 20 - 6300 [rpm] - Feed rates: 1 - 4000 [mm/min] - X and Z rapid feed: 12 [m/min] - Y fast feed: 10 [m/min] - Accuracy: 0.001 [mm] Cjlimjrnq R Re I Arogt

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 310 tool taper SK 40 speeds 20-4500 U/min Colim I Aovy Ikforegt weight of the machine ca. 3 t dimensions of the machine ca. 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation

Condition: good (used), Year of construction: 2007, DECKEL MAHO CNC Vertical Machining Centre Type:DMC635V Year2007 Control:HEIDENHAIN iTNC530 XYZ travel:635x510x460mm Spindle speed:14000rpm
Table size:790x560mm Max. table load:800kg Csljv Nha Sjim I Arsgt Toolchanger:30atc Machine weight:3700kg Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Vertical Machining Center Manufacturer: Deckel Maho Model: DMC 64 V linear Control: Heidenhain 530 Year of Manufacture: 2003 Functionality: Fully functional Operating hours: 15,010 h Colimsv Sz Smo I Arsgt Technical Specifications: X-axis travel: 640 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle speed (max.): 12,000 rpm Number of tool magazine slots: 30 EQUIPMENT: - BLUM tool breakage/measurement system - Electronic handwheel - 3 leveling elements - Chip conveyor - Coolant system

Condition: excellent (used), Year of construction: 2009, operating hours: 19,209 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece weight (max.): 600 kg, total height: 2,670 mm, total length: 2,275 mm, total width: 3,288 mm, table width: 560 mm, table length: 790 mm, spindle speed (max.): 14,000 rpm, CNC controller: Siemens 840D Axes X-axis travel mm: 635 Y-axis travel mm: 510 Z-axis travel mm: 460 Distance spindle nose - table surface mm: 720 Feed rates m/min: 20 Rapid traverse m/min: 30 Acceleration in the axes m/s2: 5 Worktable Number of pallets: 1 Table dimensions mm: 560x790 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 18,5/15 (40%ED/cont) Spindle torque Nm: 100/74 Celim I Aeu Aaxkersgt Tool system Tool holder: SK40 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Tool-to-tool time s: 1.6 Chip-to-chip time s: 6 Equipment Electronic Handwheel Chip conveyor blowing air through spindle center selectable via M-function Direct measuring system XYZ Machine running times Under power: 40183 Spindle Working: 19209 Rated power kVA: 35 Basic machine dimensions / weight Length mm: 2275 Width mm: 3288 Height mm: 2670

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Cgolim I Ajv N Hmworjt Pallet storage: 5-station Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Cjlijvx N Shsm I Arogt Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: good (used), feed length X-axis: 400 mm, travel distance X-axis: 400 mm, spindle speed (max.): 4,000 rpm, CNC milling machine MAHO MH 400 E Control: Philips CNC 432 From the restructuring of a training workshop The machine is running perfectly, has been fitted with a new backup battery (lead-gel), and the machine parameters have been updated. Bed guides in very good condition. Accessories: Complete machine documentation with operator's manual and programming instructions X travel: 400 mm Y travel: 375 mm Z travel: 250 mm - Angle table - Spindle: ISO 40 - Speed: 80 - 4000 rpm - Spindle drive: 2.2 kW - Feed rate: 1-1500 mm/min, continuously variable - Rapid traverse (X, Z, and Y) 2.5 m/min Cgolimeu Skkpj I Arjt - Pivoting control panel with PHILIPS 432 CNC path control - Central lubrication system - Weight: approx. 1500 kg - Hydro-mechanical tool clamping system - Swiveling device for the vertical milling head - Splash guard cabinet as a table enclosure with three hinged doors - Electrical control cabinet permanently mounted on the machine - Coolant system with coolant pump located adjacent to the machine - Central oil lubrication system Dimensions: 220 x 185 x 190 cm (L x W x H)

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, table width: 1,400 mm, table length: 1,600 mm, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Colsvwm Rfsim I Arjgt Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2011, operating hours: 35,989 h, Functionality: fully functional, machine/vehicle number: 15475052074, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 13 kVA, torque: 57 Nm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 1,500 kg, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (max.): 10,000 rpm, spindle speed (min.): 10,000 rpm, operating hours of spindle: 35,989 h, spindle nose: SK-40, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC machining center DMG MORI DMC 1035 V built in 2011, is designed for machining parts with a maximum weight of 1000 kg. Table dimensions 1200mmx560mm. The machine has three numerically controlled axes with feeds of 1035 mm (X), 560 mm (Y) and 510 mm (Z) respectively and accelerated feeds of 25 m/min. A spindle with a maximum speed of 10,000 rpm equipped with cooling and SK-40 cone, guarantees excellent quality, precision and a significant shortening of the milling process. The machine is equipped with a HEIDENHAIN iTNC 530 CNC controller enabling full control over the machine's operation. The total weight of the milling machine is 5150 kg. The DMC 1035V is additionally equipped with: belt filter, table and substrate rinsing, air blowing through the spindle, chip conveyor, Colim Iev Rn A Ne Arjgt

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 3,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 8,300 mm, total width: 3,400 mm, table width: 900 mm, table length: 3,600 mm, overall weight: 35,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 80, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 3.600 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Table dimensions mm: 4.200 x 900 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 48 (40% ED) Spindle torque Nm: 294 (40% ED) Tool system Cgolim Iovi N S Ae Arot Tool holder: SK50 Tool magazine slots: 80 Equipment Chip conveyor Rotating inspection windows Rinsing gun Operating mode 4 Internal coolant supply Vertical spindel Linear drive X-axis Working space separating wall Cooling Cooling through the Spindle Center bar: yes Tank capacity: 600 High-pressure bar: 40 Machine running times Under power: 66.568 Spindle Working: 20.641 Basic machine dimensions / weight Length mm: 8.300 Width mm: 3.400 Height mm: 2.900 Weight kg: 35.000

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Colim Isvyr Tds Arogt Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: used, Year of construction: 1990, Technical details: clamping surface area: 760x445 mm no. of flutes: 7 Stück table - swiveable: li/re je 20 Grad table rotating: 360 Grad weight of the machine approx.: 284 kg Cjlimou Nkq De I Arsgt space requirements of the machine approx.: 0,9x0,6x1,0 m machine table - with under frame, moveable with 4 rotatable wheels - vertical mounting area: 350x250mm - T-slot comparable according DIN 650 and 508: - a=14mm - h=24mm - b=24mm - c=10mm *

Condition: used, Year of construction: 1988, Functionality: fully functional, last week put away working due to replacement by profile milling machine. Cslsv Idt Ejim I Arjgt Cover not shown are included.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,810 h, Functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Cgoliev Rdbuom I Arst X-travel: 640 mm Y-travel: 600 mm Z-travel: 500 mm Control: SIEMENS 810D powerline Spindle speed: 12,000 rpm Table dimensions: 850 x 630 mm Table load: max. 600 kg Tool magazine: 30 positions MACHINE DETAILS Total power requirement: 42 kW Machine weight: approx. 6.5 t Space required: approx. 3.50 x 3.30 x 3.60 m On-time: 52,248 h Spindle hours: 8,810 h EQUIPMENT - BLUM tool breakage/measurement system - Electronic handwheel - 3 leveling elements - Chip conveyor - Interlit SPB coolant/belt filter system 3/600

Condition: excellent (used), Year of construction: 2018, operating hours: 17,745 h, Functionality: fully functional, machine/vehicle number: 14585619924, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 34 kVA, torque: 130 Nm, controller model: HEIDENHAIN TNC 640, workpiece weight (max.): 1,500 kg, table width: 750 mm, table length: 1,460 mm, table load: 1,500 kg, rotational speed (max.): 20,000 rpm, spindle speed (min.): 20,000 rpm, operating hours of spindle: 17,745 h, spindle nose: HSK-A63, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC machining center DMG MORI DMC 1150 V built in 2018, is designed for machining workpieces with a maximum weight of 1500 kg. Table dimensions 1460mmx750mm. The machine has three numerically controlled axes with feeds of 1150 mm (X), 700 mm (Y) and 550 mm (Z) respectively and accelerated feeds of 42 m/min. Celim I Aev Rnw Hsregt A spindle with a maximum speed of 20,000 rpm equipped with cooling and HSK-A63 cone, guarantees excellent quality, precision and a significant shortening of the milling process. The machine is equipped with a HEIDENHAIN TNC 640 CNC controller enabling full control over the machine's operation. Additional equipment: HEIDENHAIN TS 649 workpiece measuring probes with infrared transmission and a chip conveyor. The total weight of the milling machine is 8800 kg. The DMC 1150 center is additionally equipped with: IKZ 40 bar, belt filter, table and substrate rinsing, air blowing through the spindle, chip conveyor, Heidenhein TS 649 measuring probe

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, torque: 980 Nm, controller manufacturer: Siemens, controller model: 840D-Powerline, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, table width: 800 mm, table length: 630 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,963 h, coolant supply: 40 bar, spindle motor power: 32,000 W, number of slots in tool magazine: 180, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Celieui Np Rom I Arjgt Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain training machine few spindle hours Huznepo Technical data: >> Year of manufacture 1998 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Cjljvyr Rpoim I Arogt Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T was used for training in a large company and has few spindle hours. Take the opportunity to view and try out the machine on site with power on.

Condition: used, Year of construction: 2001, Technical details: Cgjlim Isu Idgcs Arjt x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kp tool taper: SK 40 & HSK 63 Revolution per minute: 20-12 000 U/min. feed speeds infinitely variable: x/y/z= 20-10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: excellent (used), Functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 Cjlim Ijvyr N Sj Arjgt >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm Cjlieu T Navsm I Arsgt z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg Cgolju Nda Eoim I Arjt dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Cgolim I Aevc Avujrst Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed Cgslsvc Avhsim I Arst -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *