Used Abus for sale (107)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Kdodpow Hnvtefx Ad Nsg Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: F32/16, ABUS EHB overhead crane crane runway with cantilever supports Dimensions approx. 8.2m x 4.8m, payload / lifting load 1x 250 KG - 0.25to Technical data of the system: Crane runway made from ABUS HB180 rails Approximate dimensions as follows: External dimensions - space requirement approx. 8.2m x 4.8m with 1 bridge 250KG payload Top supports 4.05m Top rail 3.88m UK running rail 3.70m Upper bridge 3.62m UK bridge 3.46m Hook height 3.05m Track width 3.8m Internal dimensions of supports 4.46 m Rail length 8.2m Bridge length 4.4m Base plate of the support 50x50cm Support HEA180 Support spacing 7.88m All supports can be set up variably. The system is delivered complete: ABUS HB rails, trolleys, end plates, cable drag, holder/hanger, chain hoist with control bottle, 4x supports, etc. Crane is dismantled and available immediately Inspection book is available Item location is 75053 Gondelsheim Almost new condition, see pictures Kedpfx Ajmi S A Aed Njdg There are 10 different systems available, please ask for your size! Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 2022, operating hours: 125 h, condition: like new (used), functionality: fully functional, total length: 12,900 mm, machine/vehicle number: 250-113316, Abus crane 5to span 12.7m hook path 20m with crane travel and trolley travel limit switch.operating hours hoist 125h.radio remote control with spare transmitter etc.system as new with document. Kdedstqzq Aopfx Ad Neg

Year of construction: 2024, operating hours: 96 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 110-063934, Single girder overhead crane 5 tons, span 3350 mm, hook path 20 m, reeving 2/1, radio remote control, rain cover, crane travel four-wheel drive, etc. Ksdpfx Adjwdrfms Nedg

Condition: as good as new (ex-display), ABUS chainhoist 2 tonn capacity. High lift-11meters. Never worked. Kjdpsld S Naefx Ad Nodg

Condition: good (used), Chain hoist ABUS GM 4 500.8-1 Used goods, built in 2018, very good condition, see pictures System was only in trial operation for about 1.5 years in a food company! Load capacity: 500 kg Lifting height 10 m/chain length. Lifting speed: 2 - 8 m/min 0.90 kW With radio remote control 18 units available. Negotiated price: € 1,500 net ex warehouse No charger for radio remote control included and no documentation (test book, type certificate) for the ABUS available. Dismantling will take place from April to June 2024. Location in northern Italy. Viewing possible by appointment. More information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING MUST GO! - from location to the end of June 2024 at the latest!! The following products from the system are also for sale: 300 x Dematic Multishuttle DMS 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt SC3 XB 3900 m container conveyor technology 600 m pallet conveyor technology 34 x Dematic vertical lift 11 m height - 4 m/s 3 x pallet stackers 4 x palletizing systems Schwingshandl 2 x pallet stations Autopall Schwingshandl 20 x pallet stations Manpall Schwingshandl 18 x pallet lifts 4 x Dematic pallet stations 14 x pallet wrappers Unitech UNI WRAP 200A + 900 A 25 x container stacking system Schwingshandl 35 kg 8 x labelers 20 x weighing stations 200 x system control cabinets Ksdpfx Aotuuxred Nsdg Partial sale possible! (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... Kdjdpfx Ajvldr Aod Nog NEVER USED - complete metal forming / processing plant (about 80 machines) Please contact us for full machinery list and more photos. Thank you!

Year of construction: 1984, condition: used, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Trolley Year of manufacture: 2007 Trolley track: 1600mm Kdodpfx Asudditjd Nog Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: used, Year of construction: 2020, weight max. 0,5 t stroke 500 mm Kedpfxjx U Ayie Ad Nsdg height of hook 1750 mm

Condition: used, Year of construction: 1988, Year ca. 1988 arm length 2000 mm weight max. in kg max. 1000 kg height of hook max. 2000 mm Kodpoidrhyjfx Ad Nodg WITHOUT LIFTING DEVICE . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1991, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist -Type: GM Load capacity 250 kg Kdodpfx Asx Tdwgjd Neg -Main stroke: 10.0 m/min -Fine stroke: 2.5 m/min -Chain length: 3 m -Transport dimensions: 550/340/H350 mm -Weight: 33 kg

Condition: new, weight max. 0,5 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Kdodoh Un E Sjpfx Ad Nog Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Kdsdpfx Adjh Un Haj Nsg Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, weight max. 0,25 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Kdjdpfjh Un Hdjx Ad Nsg Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: good (used), Year of construction: 1999, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley Kedpfxewq Ndas Ad Nedg -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg

Condition: good (used), Year of construction: 1984, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK Kedpfx Adjvt Raps Nedg -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Year of construction: 2011, condition: used, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm Kodpfst E D Hcox Ad Nedg -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Kdjdpfxofc T Tfo Ad Nog -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW Kdedpfsxak H Ejx Ad Njg - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 Kjdpoxak D Rsfx Ad Nodg - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm Kdedpjxak Hxefx Ad Neg height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm Kjdpfju Nvmdex Ad Nedg *

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing Kdsdpfx Adjw Rddyj Nog • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: excellent (used), I am selling an ABUS 16T hook block. Very good condition. Kdjdev Upb Uspfx Ad Neg

Condition: used, load capacity: 4,000 kg, FOR SALE: Console/Jib Crane – 2 t + 2 t, 8 m Span, 5.3 m Height For sale: Console/jib crane suitable for industrial lifting and material handling. Specifications Lifting capacity: 2 tons + 2 tons (two hoists) Span / outreach: 8.0 m Height: 5.3 m Kdodpfx Aeya H Exjd Nsg Description Practical crane solution for workshop or production use where controlled lifting with two hoists is required. Suitable for handling parts, tools, and assemblies. Location: Finland (to be confirmed) Delivery/loading: Can be arranged by agreement.