Aging machine, brushing machine 400 mm

EXW Fixed price plus VAT

€4,300

Condition

Used (fully functional)

Location

Łabuńki Pierwsze Poland

Machine data

Machine type:: Aging machine, brushing machine 400 mm

Condition:: ready for operation (used)

Functionality:: fully functional

Price & Location

EXW Fixed price plus VAT

€4,300

Location:: Łabuńki Pierwsze 6, 22-437 Gmina Łabunie, Polska

Call

Details about the offer

Listing ID:: A223-54197

Update:: 17.07.2026

Description

On offer: Wood aging/brushing/polishing machine, 400 mm – 2 heads

The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises.

The machine's greatest advantage is its two independently adjustable brushing units, each with its own inverter allowing for speed and rotation direction adjustment. Combined with the smoothly adjustable feed rate, this allows for adjusting the intensity of the processing according to the type of material and achieving various wood finishing effects – from aging, brushing, and texturing the surface to smoothing and polishing elements.

Specifications:
• Machine type: wood aging/brushing/polishing machine
• Working width: 400 mm
• Number of brushes: 2 pcs
• Maximum working height: 65 mm
• Spindle length: 460 mm
• Spindle diameter: 35 mm
• Pneumatic roller pressure
• Brush motor power: 2 × 0.75 kW
• Option to install larger motors – additional cost
• Conveyor speed smoothly adjustable in the range of 2–25 m/min
• Each brush controlled by an inverter, with the ability to adjust the direction and speed of rotation
• Independently adjustable height of the brushing units
• Machine equipped with brushes with grit 120 and 180
• Overall dimensions: 400 × 110 × 160 cm (L × W × H)

Additional information:
• Machine inspected and prepared for operation
• Photos show the actual condition of the machine offered
• Free training on machine operation at our company's premises
Codpfxezmhkze Acyoha
• The price stated in the auction does not include VAT

Financing and transport:
• We organize transport using the MDD fleet, courier companies, or external carriers
• We assist in obtaining leasing or a lease loan
• Delivery costs depend on the destination and the method of transporting the machine

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2021

96 listings online

Call

Send inquiry

Telephone & Fax

+48 84 30... show

These listings may also fit your interest.

Auction

Deephole boring machine BUCK TBFZ 1600 CNC

Hessen

7,848 km

Deephole boring machine
BUCKTBFZ 1600 CNC

€18,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chedpfeznkpvox Acyea Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

See details

Auction

Vertical machining center AXA VSC-3-3000-M

Nordrhein-Westfalen

7,718 km

Vertical machining center
AXAVSC-3-3000-M

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Csdpozncnqefx Acyjha Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

See details

Auction

Horizontal machining center HELLER MCH 250

Nordrhein-Westfalen

7,718 km

Horizontal machining center
HELLERMCH 250

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Chedpfx Aszncnkscysa Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

See details

Auction

5-axis horizontal machining center HELLER MCH 280 C

Nordrhein-Westfalen

7,718 km

5-axis horizontal machining center
HELLERMCH 280 C

€59,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Codpfx Aozncndscyeha Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

See details

Auction

Laser cutting machine Prima Power CV 5000

Hessen

7,854 km

Laser cutting machine
Prima PowerCV 5000

€7,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Csdpszncm Hefx Acyoha Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

See details

Auction

Injection molding machine ENGEL ES 2050/400 HL

Hessen

7,865 km

Injection molding machine
ENGELES 2050/400 HL

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Cedpfx Acozncmtsyjha Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

See details

Auction

Injection molding machine ENGEL DUO 3550/650

Hessen

7,865 km

Injection molding machine
ENGELDUO 3550/650

€29,500

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Chedpozncmasfx Acyea Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

See details

Auction

Horizontal pressure beam saw HOLZ-HER Cut 6120

Baden-Württemberg

7,974 km

Horizontal pressure beam saw
HOLZ-HERCut 6120

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Codpjznbkkefx Acyoha Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

See details

Auction

Machining center Weeke Optimat BHC 750 Swiss Profiline

Województwo wielkopolskie

8,115 km

Machining center
WeekeOptimat BHC 750 Swiss Profiline

€5,590

To the auction

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Cjdpfxoznbgrs Acyoha Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

See details

Auction

Turning automatic lathe Citizen C32-VIII

Baden-Württemberg

7,939 km

Turning automatic lathe
CitizenC32-VIII

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Csdpfozlqdzox Acyoha Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

See details

Advertise here