Bread cooling room, ventilation ducts

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Fodpfx Ahez Hxtdsdegh Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Fgedpew E D Ivsfx Ahdoh

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Fgsdoz Hvgzspfx Ahdeh Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 800 h, load capacity: 300 kg, arm reach: 21,000 mm, working height: 37,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 37 m Lateral reach: 21 m MACHINE DETAILS Fgsdpsz Hz Hgsfx Ahdoh Self-weight: 18 t Load capacity: 300 kg Operating hours: approx. 800 h Mileage: approx. 5,000 km EQUIPMENT Vertical H+H stabilizers with additional lifting capability SPEED version with automatic stabilization at the touch of a button Proportional electro-hydraulic control with speed adjustment for all movements Boom/cabin protection device Manual emergency pump Emergency stop button Automatic stabilization Load moment limiter for double safety Automatic stabilization control from the basket and from the ground Internally routed cables for protection Safety bypass Maintenance and repair history: complete, including inspection records

Condition: like new (used), Can be modified into a freezer. Fgjdpfx Aeycvplohdsh Perfect for bread cooling/freezing because of the big tier pitch Full Specs and price on request 610mm wide stainless steel belt with overlay (Omnigrid) fully stainless steel frame New plastics Brand new gearbox Brand new control panel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 766 h, load capacity: 500 kg, arm reach: 7,500 mm, working height: 15,900 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.90 m Lateral reach: 7.50 m Basket rotation: 90° + 90° Dimensions of aluminum basket: 1,200 × 700 × 1,100 mm Power outlet in the basket: 230 V Power outlet in the basket: 12 V Turret rotation: 700° Number of base plates: 4 MACHINE DETAILS Payload: approx. 500 kg Carrier vehicle: Piaggio Porter Operating hours: 766 h EQUIPMENT Hydraulic basket rotation Front basket mounting Pipes and cables installed in the boom Automatic closing of the boom section Automatic stabilization Lateral outriggers H + H with extra lift Fsdjz Hz D Sjpfx Ahdegh Automatic stabilization control from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Automatic engine speed regulation Possibility of simultaneous operation Display for centering the boom section in the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment Coming-home function Outline lighting for boom and turret Socage Connect Painting of boom and column parts in white, RAL 9016 Frame painting in black, RAL 9005 Painting of head and hydraulic cylinder in blue, RAL 5015

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Fjdpfx Aoz Hvyzohdegh Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler Fgodpfxoy Au Ino Ahdeh An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Fgodpfx Ahjz Ia Rgjdeh Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! Fgjdpfjz Hu Sijx Ahdoh TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Tetra Laval spiral freezer, type: SVR 400/13.75-100-159, 380 V, 3 Ph, 50 Hz, 17 floors, s/s mesh belt, belt width: 460 mm, infeed height: 1030 mm, outfeed height: 2700 mm, total dimensions: 5850 mm x 2650 mm x 3350 mm. Including evaporator, cooling compressors and Goedhardt roof condenser, type: KOAL-76L/3-6P, number: 97-3958-010, year of construction 1997, 3 fans, dimensions: 1200 mm x 5500 mm x 1900 mm. Fedpfx Aoy Tl S Sehdogh

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Fgedpfxjz Hmc Tj Ahdeh Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393Z00745, Year of construction: 2009, operating hours: 32,592 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,874 mm, fuel type: gas, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,900 mm Fgsdpjz I I I Hefx Ahdoh Free lift: 1,874 mm Overall height: 2,641 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,925 kg Operating hours: 32,592 h EQUIPMENT 3rd valve 4th valve Heater Full cabin External reference: SL16126SLO

Condition: excellent (used), Year of construction: 2003, 683 USED Industrial Kaiser roll line, hamburger line, and hot dog line. NOTE: It is possible to see the line in operation in Poland. EQUIPMENT: - bowl tipper, - KOENIG 6-row divider-rounder, - pre-proofer, - bun labeling station, - final proofer, - tunnel oven, Fgodpfxjy Skr Is Ahdjh - feed conveyors, - bun counter. 1. Koenig Roll Line TECHNICAL DATA: - Capacity: 3,000-12,000 rolls/h - Weight: 50-130 g - Labeling: 3 roll symbols, Kaiser roll, Portuguese roll - Koenig roll line length: 900 cm, height: 376 cm, width: 180 cm 2. Final Proofer TECHNICAL DATA: - Final Proofer equipped with temperature and humidity control - Dimensions: L: 460 cm, W: 340 cm, H: 380 cm 3. Ciberpan Tunnel Oven TECHNICAL DATA: - Dimensions: W: 386 cm, L: 29 m, H: 290 cm - Baking belt working width: 245 cm, Baking belt length: 28.8 m - Baking area: 70 m² - Weishaput gas burner: 50-55 kW - Equipped with a burner and steam generator. 4. Affeld Roll Counter TECHNICAL DATA: - Year of manufacture: 2012. - Dimensions: width 200 cm, length 227 cm, height 240 cm. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, load capacity: 200 kg, fuel type: electric, working height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 200 kg Working height: 10,000 mm MACHINE DETAILS Fgjdjz I I Iaopfx Ahdjh Drive type: Electric Weight: 2,735 kg Rated power: 1.2 kW Operating hours: 836 h External reference: SL16147SP