Single shaft shredder

LINDNER KOMET 2200

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Njdpeyu Undsfx Aphjwl Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Nwsdpfx Aporp E Nnshjl

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Njdpoh Nmt Defx Aphewl Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: excellent (used), Year of construction: 1999, Angel ES 650/175 HL-V Closing 175 tons Year 1999 Scrow 45mm Nodpfx Aspdrzhephewl Stroke volume 318 cm3 Enlarged clamping plate 820x750 Mould height min 250 mm

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Njdpfx Asiidm Tsphjwl Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Nodpfx Apszh Nibjhowl

Condition: excellent (used), Dimensions: 5000 x 360 mm Nedpfxehink De Aphewl Quantity: 1 piece Price/piece

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Nedpfxjxuczqo Aphewl Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Available for inspection and testing in Ivanka pri Nitre, Slovakia Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities

Condition: excellent (used), Item: D-9134-Danfoss Inverter VLT Diverse Frequency Inverter Danfoss Type VLT Diverse types 2010/2020/2030/2060 Speed drivers Nwsdpfxshcpv Sj Aphol Information at attached photos with number.

Year of construction: 2014, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Nodpjv Ip Sysfx Aphswl