Washelevator with mill

Kreuzmayr Maschinenbau KWEM 1000

Year of construction: 2022, operating hours: 150 h, Condition: new, capacity up to 8000kg/std with grinder 5,5kW with shredder belt (plastic chain) speed steplessly adjustable Powerful blower Yfn3Znie Cleaning water circulation pump

Year of construction: 2025, Condition: new, Singlebeltpress up to 800 kg/h on fresh apples including automatic belttensioning and regulatingsystem integrated highpressure-beltcleaning-system inverter for beltspeed B3P7X Wash&Grinding Unit with 3,0 Kw full stainless-steel construction

Condition: new, Year of construction: 2024, Functionality: fully functional, Technical description with the following main data: Load capacity 1000kg static line load useful stroke 775mm overall height 85 mm total height 860 mm platform length 1450 mm platform width 1140 mm Material smooth sheet metal Lifting time approx. 20 sec. for full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable Cighe8Nnwl motor 1,1 kW Painting blue-grey RAL 7031 Unit placement free standing Control box dead man control incl. 2 m cable Total weight approx. 270 kg Standard version: The lifting tables comply with EN 1570 E and are CE marked. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables.

Year of construction: 2022, Condition: new, Kreuzmayr puree compact system for pitting and straining various fruits. 2 pcs. destoning-passing machines mounted on the frame Mash tube heater and pasteurizer for 1000 kg/h output Oil or gas burners can be added to the boiler as required Irgdormru

Year of construction: 2020, Condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Mfc8B Max. Pressure : 6 bar incl . electronic control incl . booster pump

Year of construction: 2025, Condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Thn7Zdos Belt width/length: 1000mm/approx. 7000mm Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm without high-pressure cleaner and without compressor

Year of construction: 2024, Condition: new, Functionality: fully functional, Kreuzmayr citrus juicer KCE 1000 Newly developed industry standard citrus juicer Hourly output Approx. 2500 kg oranges (depending on the size of the fruit) Juice yield approx. 50%, i.e. approx. 1250 l/h juice Mwkvzilslh Drive power 9.0 kW Weight 700 kg Total height of the machine 2600mm Feeding height of the fruit approx. 1950mm Peel discharge screw Integrated juice finisher for fine filtration of the juice after pressing The machine can be operated with dry oranges (without washing), The juice does not come into contact with the peel, thus minimizing the amount of peel oil in the juice

Year of construction: 2025, Condition: new, lxbxh 7500x2550x3000mm stainless steel frame with aluminium bottom and aluminium outside walls and roof this container is made for changing systems on trucks with hydraulic feet, to lower down the platform to the ground - Central control panel (for belt press and washing elevator): it is fixed that it is not on the belt press. It is either in the center of the container or on the washing elevator. - Canvas cover: Additional hanging cover side doors: on the heater side in two parts Dwvk2Z0Jy - Water supply: Connection and system in 1" - Hydraulic system: Operation with 24V DC and 400V power supply; 24V DC magnetic valves

Condition: new, Year of construction: 2025, in line bottle filler for 2 bottles from 0.2 to 2 liter on fixed chassis with storage tank Ye9Kojw2

Year of construction: 2025, Condition: new, 18 kW e-heater for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame Xvyci

Year of construction: 2022, Condition: new, Stainless steel execution Bx23R Motor power 1 .1kw left - right rotation Stirring wave length 1000 mm Mixing blade diameter 150 mm

Year of construction: 2012, Condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control Vyxxg storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Condition: new, Year of construction: 2025, in line bottle filler for 4 bottles from 0.2 to 2 liter on fixed chassis with storage tank Ye9U797G

Year of construction: 2025, Condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Capacity up to 750l/h incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Szzugp Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 canvas cover with gas pressure spring for both sideboard, backboard able to open 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Year of construction: 2013, Condition: as good as new (ex-display), Technical description with the following main data: Load capacity 1000 kg static line load Useful stroke 895 mm Overall height 85 mm Total height 980 mm Platform length 1450 mm Platform width 1000 mm Material Smooth sheet metal Stroke time approx. 15 sec. for the full effective stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Engine 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 in general, solenoid valve and switch IP 65 Unit placement free standing Operating box Dead man's control incl. 2 m cable Total weight approx. 205 kg Standard version: The lift tables comply with EN 1570 E and are marked with the CE mark. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane varnish. The lift tables are equipped as standard with safety shut-off strips on all sides made of aluminium and with assembly supports for repair and service. Bjnqtnfrwq Our lifting tables are dimensioned for approx. 10 strokes/hour with full load in 8 hours/day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts during normal operation in one shift, excluding labour costs.

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Vlsrsiop3

Year of construction: 2020, Condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Made of stainless steel. Deaeration takes place in a vacuum container. operating temperature approx. 50°C. 2Pwd93 Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Condition: new, Year of construction: 2024, Functionality: fully functional, Technical description with the following main data: Load capacity 1000 kg static line load useful stroke 810 mm overall height 200 mm total height 1010 mm Ytn788 platform length 1300 mm platform width 800 mm Material smooth sheet metal Lifting time approx. 16 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable motor 0,75 kW Painting blue-grey RAL 7031 Power unit placement integrated in the lifting table Control box dead man control incl. 2 m cable Total weight approx. 160 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE sign. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts at normal operation in one shift, excl. labor costs.

Condition: as good as new (ex-display), Year of construction: 2008, *SALE WITHOUT ROLLER CONVEYOR Technical description with the following main data: Load capacity 1000 kg static line load effective stroke 830 mm Overall height 180 mm Beizysa Total height 1010 mm Platform length 1300 mm Platform width 800 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 0.75 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 175 kg* incl. limit switch and thermal fuse up to 2.2 kW motor - Switch for up/down and manual operation is integrated in the control box

Year of construction: 2014, Condition: new, for 3/5/10 liter BaginBox packaging 3Obhtah material: plastic

Condition: new, Year of construction: 2023, Molding edge banding machine 7B9Qiho23J Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Workpiece width min. approx. 30 mm Workpiece length min. approx. 200 mm Electrical connection 230 V Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 1,300 kg, rotor width: 600 mm, sieve perforation: 20 mm, power: 185 kW (251.53 HP), working width: 600 mm, WEIMA Häcksler Bjfgogsa7N Antrieb: 18,5kW. Typ: WL 4. mit Austragschnecke möglich

Condition: excellent (used), Paper stack lift MZE Diplomat SHPA 175 × 130 The device is in perfect condition. Hydraulic drive, the latest type hydraulic unit. Power supply 400V Panel-operated lifting cycle, fast work. Capacity 1500 kg. Drgvip Pallet / sheet size 1750×1300 mm

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Minimum workpiece width approx. 75 mm Workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tools height = 55 mm Ccawg0Lwa3 Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cut-off unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Radius scraper unit with blow-off device and extraction system Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual valve mounted on the machine Availability: Short-term Storage location: Hüllhorst

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Crw2Qeyjqm Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen