Mash agitator

Kreuzmayr Maschinenbau KRW

Condition: good (used), Year of construction: 2008, machine/vehicle number: 34/30, total width: 2,840 mm, total length: 9,000 mm, total height: 5,950 mm, Device for gasification, gas afterburning, extraction system. Total value of electrical connection 90 KVR. Operating voltage 400/230V 50Hz. Control voltage 230V AC, control voltage 24V DC. Device dimensions: length 9000mm, width 2840mm, height 5955mm. Nslhcjh Nyczjdwujkw

Year of construction: 2016, Condition: good (used), machine/vehicle number: KPF2000, Model: KPF2000 Manufacturer: Kreuzmayr Maschinenbau GmbH (Austria) Manufacturing year: 2016 Specifications: - For filling liquid, solids-free foods such as puree, juices, wine, cooking oil, milk products etc. into spouted pouches; - Adjustable dosing capacity 100-2000 ml; Njlhev N Tznscdwuekw - Capacity: around 1000 - 2000 bags/h; - The dosage of the filling is done by a built-in volumetric piston dosing system - Maximum filling temperature is up to 95°C. - Consists of: automatic pouch-loading, vacuuming, cleaning the spout, cap feeding and inserting, capping, discharging and liquid level controlling, nitrogen injection; - Including cap supply unit; - Equipped with buffer tank with level monitoring; - CIA cleaning system; - Control panel; - Dimensions approx. 1430 (+750) x 1510 x 1800 h mm; - Electric power: 2.0 kW; - Electrical supply: 400 V, 50 Hz, 3 phases; - Recommended pressure of supply: 8 bar; - Air consumption: per cycle: ~5.5 Liter at 7 bar; - Filtered compressed air, not oiled, 0°C to +50°C;

Year of construction: 2025, Condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Nelhcdwo Hmtdjuskw Central wastewaterdrain on the bottom (ø75mm)

Condition: new, Year of construction: 2025, in line bottle filler for 2 bottles from 0.2 to 2 liter Nele Hmu Nohcdwujkw on fixed chassis with storage tank

Year of construction: 2025, Condition: new, 18 kW e-heater for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... automatic temperature control Njlhcde Hmwkjwujkw 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 2022, operating hours: 150 h, Condition: new, capacity up to 8000kg/std with grinder 5,5kW with shredder belt (plastic chain) speed steplessly adjustable Powerful blower Cleaning water circulation pump Nslo Hnafjhcdwuokw

Year of construction: 2012, Condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin Nolhce Hnnhedwujkw max. weight: 1350 kg

Condition: new, Year of construction: 2025, in line bottle filler for 4 bottles from 0.2 to 2 liter on fixed chassis with storage tank Nkels Hmvhehcdwujw

Year of construction: 2025, Condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Nkjlo Uv Itehcdwuew Capacity up to 750l/h incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 canvas cover with gas pressure spring for both sideboard, backboard able to open 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Year of construction: 2014, Condition: new, for 3/5/10 liter BaginBox packaging material: plastic Nkolhcdwe Hncisuew

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, power: 18.5 kW (25.15 HP), WEIMA. Shredder Typ: WL 4. Antrieb: 18.5 kw. Rotorbreite: 600 mm. Nelhotryvtscdwuekw

Condition: good (used), Year of construction: 1994, bending angle: 190 °, bending radius: 700 mm, overall weight: 3,300 kg, wall thickness: 11 mm, - PLC: Siemens Simatic S7 - NCU control system: Siemens 840D - CNC control: MMI Multicontrol 2000 - Dimensions and weight: Length: 11.9m, width: 5.0m Height: 2.3m (according to manufacturer's data sheet)  3.5m currently measured at the highest point of the machine (see sketch below) o Empty weight: 33t o max. pipe Ø: 168.3mm o max. bending radius Rm: 700mm Nolhcdwov Tba Hjuskw o min. Bending radius Ri: 80mm o Pipe extension length: 6000mm o max. bending angle: 190° o max. moment of resistance with St35W: 201cm3 - Electr. connected load: o 400V/50Hz o Full load current: 85A

Year of construction: 1998, Condition: used, Technical details: profile width: 50 mm work height max.: 950 mm Nelhcdwou Ibuwouskw interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Year of construction: 1999, Condition: ready for operation (used), Sideboard equalizer for edger 6x2 chain conveyors Alignment roller conveyor Diverter for turning/rejection Including transfer plate to lower cross conveyor Conveyor length approx. 3000 mm Nelhcjv S Tx Sedwuskw Shaft already designed to be divisible, no welding required during assembly!

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,650 mm, total length: 4,640 mm, total height: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, overall weight: 1,200 kg, input voltage: 400 V, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, grinding width: 950 mm, grinding belt speed: 25 mm/s, grinding belt length: 9,000 mm, extraction connection diameter: 180 mm, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, height adjustment type: electric, grinding length: 2,500 mm, motor speed: 1,435 rpm, input frequency: 50 Hz, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: Nkjlov S Sr Rshcdwujw - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings Neljv N Hgkshcdwuokw - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: new, Year of construction: 2025, WEIMA shredder/shredder for shredding many types of wood waste such as production waste, waste wood, etc. Type:WL 4 Drive:18,5kW. Rotor width: 600mm with second row of knives (28 pcs.) 40x40 mm concave complete with connected switch cabinet (with 5m cable) Njlhcdeqgcrrowuekw with logspacer hopper opening (600 x 1050 mm) Weight: 1300 kg

Condition: new, Year of construction: 2023, Molding edge banding machine Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Workpiece width min. approx. 30 mm Workpiece length min. approx. 200 mm Electrical connection 230 V Nkelhcel Ebyljdwujw Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN Nkjlhcdou Nfttewusw cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Profile-Guillotine PT1-200 from STEIN Maschinenbau Useful for window bars, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: max. 10 m/min Travelling distance for knife: 600 mm Cutting accuracy: +/- 2 mm Cutting stroke: 180 mm Nkslev R Tm Tshcdwuow Cutting speed continuously adjustable Pneumatic quick-change equipment for knife Pneumatic down holder for profile Knife gets preheated: 80ºC - 160ºC Cycle time for cuts: 1,5 - 4 sec. adjustable via display Entry side: Unit for applying a protection foil onto the profile Control system: Compact-SPS Siemens S7-613C Dimensions: Height: approx. 1.900 mm, extrusion height: 1.100 mm (+/- 50 mm adjustment) Floor space: approx. 1.450 x 800 mm (without intake & outlet tunnel)

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm Nkelhcjv N Hf Hedwusw • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 1,300 kg, rotor width: 600 mm, sieve perforation: 20 mm, power: 185 kW (251.53 HP), working width: 600 mm, WEIMA Häcksler Antrieb: 18,5kW. Typ: WL 4. mit Austragschnecke möglich Nelhcdefmd Hqewuekw

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Minimum workpiece width approx. 75 mm Workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tools height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cut-off unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Radius scraper unit with blow-off device and extraction system Corner rounding unit Surface scraper unit Nkolhcdwov Nta Rouow Suction pipe system with 90° bend and manual valve mounted on the machine Availability: Short-term Storage location: Hüllhorst

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm Nolhcdwsu Nfrcsuekw working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph Njlekwhapehcdwuskw total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen