KOSME Tekal, SMI Line for Non-Returnable PET bottles (2017)

KOSME

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. Cpsdpeyhc Sdsfx Af Dou - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. Cpjdpsxm Rwqjfx Af Dju THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2011, machine/vehicle number: DEPAL37, Used Depalletizer Kosme Eurodepack B1L m-40-RF 7000 bph The Used Depalletizer Kosme Eurodepack B1L m-40-RF 7000 bph is an automatic bottle depalletizing system designed for the efficient unloading of empty glass bottles from pallets and their smooth transfer into the bottling line. This machine operates with a sweep-off system, handling complete layers of bottles in a controlled and precise motion, ensuring integrity and stability throughout the depalletizing process. Built for reliability and continuous industrial use, it is engineered to sustain high-speed operations while maintaining gentle bottle handling, making it particularly suitable for wine bottling applications. The system is equipped with a motorized lifting platform that positions each pallet layer at the optimal height for the sweep-off carriage. Bottles are transferred laterally onto the discharge table, which is connected to an overhead conveyor at a height of 3,000 mm. This elevated discharge allows direct integration into bottling lines with high-level bottle infeed systems, ensuring smooth flow and avoiding unnecessary floor space usage. The sweep-off mechanism is synchronized with a layer sheet removal system, which efficiently extracts interlayers between bottle rows without disrupting the cycle. Cpodpfx Asyhcguof Dju All structural components are manufactured in stainless steel, ensuring corrosion resistance and compliance with hygiene standards for the food and beverage industry. Safety guarding in transparent polycarbonate provides operator protection while allowing clear visibility of the process. Access doors are fitted with interlocked safety switches, stopping the machine immediately when opened. Performance and Handling Capabilities With a nominal output of 7,000 bottles per hour for 0.75 L wine bottles, the depalletizer is capable of sustaining medium-to-high production speeds without becoming a bottleneck in the line. The handling system accommodates standard cylindrical wine bottles as well as shaped formats within the diameter and height range typically used in the wine industry. This versatility allows it to operate seamlessly in lines processing multiple bottle designs, from standard Bordolese to conical premium bottles. Bottle stability during transfer is ensured by precision-aligned guide rails and controlled sweep-off speed. The discharge conveyor is designed to accept bottles in a single file without accumulation shock, and the infeed height of 3,000 mm makes it fully compatible with existing high-level air or belt conveyor systems. The machine’s motion control is achieved through robust motor drives, with each function timed to minimise cycle interruptions and reduce mechanical stress. Automation and Integration The depalletizer is fitted with its own dedicated electrical ca...

Condition: used, Year of construction: 2010, Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data  Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025 Cpodpfx Afexn T Nfo Dou

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. Cjdpfx Afexm Rmxe Djpu The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stretch blow-moulder KOSME KSB 6R Preform tipper with conveying system Preform feeding rail Electrical cabinet Drive and control panel Spare parts list (on request) Cjdpfjyb Tbiox Af Depu

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Cjdpfxel Hxpnj Af Dspu

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Sidel Combi PET Bottled Water Filling Line – 18,400 BPH Manufacturer: SIDEL Year: 2018 Capacity: 18,400 bottles/hour (0.5L) / 16,400 bottles/hour (1.0L) / 14,400 bottles/hour (1.5L) Line configuration: - Blow Molder: SIDEL MATRIX SBO 08 MM 8/8 (2018), includes Box Tipper, Lifting & Tipping Unit Cpsdjx Nahyjpfx Af Deu - Automatic Preform Feeding: SAMETO EBHS 2050 (2018) - Compressor: SIAD VITO 1920 (2017) - Tribloc Rinser-Filler-Capper: SIDEL SF 100 FM (2018): 100 rinsing stations, 32 filling valves, 8-head screw capper (29/25), 141 mm pitch - Cap Feeder: Krones Gebo Cermex (2018) - Fill Level/Cap Inspection: QUBBER (2018) - Container/Label Inspection: QUBBER (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Labeller: SIDEL ROLLQUATTRO F15EVO 18T/R HH3 S1/E1 (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Shrink Wrapper: SIDEL VERSA FILM ACCESS (2018) - Pack Conveyor: Tetra Pak / Gebo Cermex (2018) - Carry Handle Applicator: KARTVILLE H 120 ND (2018) - Palletizer: SIDEL KOMBI 1P 1I IN LINE (2018) - Pallet Conveyor: Tetra Pak / Gebo Cermex (2018) - Pallet Inspection: Tetra Pak / Gebo Cermex (2018) - Layer Pad Inserter: Tetra Pak / Gebo Cermex (2018) - Pallet Stretch Wrapper: Robopac HELIX 3 E (2018) All equipment is in excellent condition and suitable for high-capacity still water bottling in PET packaging.

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive Cpsdpfx Aov Df I Nef Dju

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stainless steel CIP cups Cap feeding system Cpsdpewiy Tvsfx Af Dju

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Cpjdpfx Aomk I Dtef Deu

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Csdpfx Ajwizc Eef Dspu

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Cpsdpotuyq Rjfx Af Dju

Condition: good (used), Machine in very good condition Cpodjvuturopfx Af Dou I have 5 pieces

Condition: used, Year of construction: 2015, Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pressure injection for foaming Bottle stopper Table flushing Bunker for crown caps Csdpfjv Ic Uzjx Af Depu