Coupled signal transmission board

HOMAG

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side Ihsdpfox Tqgbex Ad Not - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2013, This HOMAG KAL210 Ambition 2262 edgebander was manufactured in 2013. It features a machine length of 7755 mm, supports edge thickness from 0.4 to 6 mm, and workpiece thickness from 8 to 60 mm. With a feed rate of 18–25 m/min, it is ideal for efficient edgebanding operations. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine length: 7755 mm • Workpiece thickness: 8–60 mm • Weight (kg): 4500 Ihjdeyaqbdspfx Ad Net • Number of automatically resettable profiles: chamfer + 1 radius / feed rate: 18–25 m/min / edge thickness: 0. 4–6 mm • Testing is possible. / the machine is in good condition and was used on only one shift.

Condition: ready for operation (used), Year of construction: 2001, This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Single-sided edge banding machine with workpiece return • Joint milling Isdpfx Asyap Tlsd Nsht • Gluing section with glue premelter • Pressure zone • Snipping unit • Flush trimming • Contour trimming unit fk 13 with automatic tool changer 8-fold • Groove trimming unit • Profile scraper // surface scraper • Buffing unit Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, total height: 300 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes Ihjdoyap S Iepfx Ad Not • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: good (used), Tax cards -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: only sold as a complete unit Ihodob A Nf Tspfx Ad Njt -Weight: 200 kg

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Ijdjx A Hczspfx Ad Noht Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: ready for operation (used), Year of construction: 2006, This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Additional equipment • Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW • PUR Nordson Melting Station / Tool Set / Suction Tube Machine Benefits Technical Machine Benefits • Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Ihsdpfx Adjx U Uzro Njt • Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm • Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing • Minimum workpiece gap: 500 mm

Condition: used, Year of construction: 2022, operating hours: 400 h, total length: 80,000 mm, total height: 20,000 mm, total width: 24,000 mm, Weight: 5.000 kg Price: On request Homag Sawteq B-130 Year: 2022 Serialnumber: Ihedpswu E Eujfx Ad Net Specification: 3200mm cutting width and length 65mm blade projection Program fence speed forward 25m/min Program fence speed backwards 60m/min Clamps 50, 250, 450, 1200, 2000, 2700mm 4 Manual trim stops Saw carriage speed 60m/min Main saw motor 7.5kw Scoring saw unit Intelliguide optical LED assistance 1 air table 2100 x 650mm with roller element 2 air tables 1800 x 650mm with roller elements 21.5 inch touch screen display CAD Plan 4 optimising software  - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 400 - Main motor power [kW]: 7.5 - Control: CADmatic 5 - Software: CADPlan 4  - Saw blade bore diameter [mm]: 60 - Max. saw blade diameter [mm]: 310 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Options: Voorritser, Optimalisatieprogramma - Feed speed: - └ Max. feed speed [m/min]: 60 - Scoring unit: - └ Scorer bore diameter [mm]: 45 - └ Scorer blade diameter [mm]: 150 - Transport dimensions: 80000mm x 24000mm x 20000mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14 Ihsdew Idhmepfx Ad Not

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-KDF 860 C Ihedpjx Hpklsfx Ad Net Position 2: Panel Return Systems HOMAG-KDF 860 C