VERTICAL MOULDING GROUP

HOMAG

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Pgedpfxsyzxa Es Amgsk Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: ready for operation (used), Year of construction: 1997, cutting length (max.): 3,800 mm, Panel saw manufactured in 1997. This HOMAG HPL 11/38/22 features a cutting length and width of 3800 mm, with a lifting table payload of 7 tons. It includes 7 clamps and automatic height control for efficient panel feeding. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG HPL 11/38/22 machine we have for sale. Contact us for further details. • Cutting width (program pusher travel): 3800 mm • Clamps: 7 units (with 2 optional additional clamps possible at positions 150/350) • Clamp spacing: 50 / 250 / 450 / 850 / 1550 / 2250 / 3050 mm (measured from angular fence to clamp center) • Air cushion tables (front of machine): • 1x at angular fence: 2810 x 650 mm • 2x: 2160 x 650 mm Pgjdpey Hr Nksfx Amgjk Additional equipment • Lifting table for batch-wise panel feeding: • Dimensions: 3800 x 2200 mm • Payload: 7 tons • Stacking height (floor level): max 680 mm • Stacking height (in-pit installation): max 880 mm • Automatic height control via control console • Heavy-duty roller conveyors (2x): Type HER 38/22 L, non-driven, longitudinal transport, forklift slots, 18 rollers, height 330 mm, roller Ø 108 mm, spacing 198.5 mm • Roller conveyor drive units (2x): Type 38/22, speed 12 m/min • Stacking station: LIFT-EX Type HAZ Ausf. A for stacking divided formats • Label printing system

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line Psdjy Hrtpjpfx Amgsgk • CE for cells (systems)

Condition: ready for operation (used), Year of construction: 2010, number of axes: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details. • Vacuum clamping system: 8x 120x50 mm (0/90°) K-Table • Rotating vacuum clamping system: 8x 125x75 mm (360°) K-Table • Vacuum pump: Reinforced 100/140 m³/h • Aggregate: Flex5+ sawing, milling, and drilling aggregate for tool changer (WZW) Pgedey Hrr Eopfx Amgok • Tool changers: 3x tool receivers for Flex5+ (WZW) • Edge banding package: Power EDGE 360° for BAZ 211/311 Venture • Edge processing: Workpiece edge blow-off nozzle • Milling/Scraping: Combination flush milling and scraper aggregate (WD 60 mm) • Profile blades: 2x for scraper • Radius cutter head: 2x WPL radius cutter head • Material handling: Tool transfer station for B200/300/K • Software: Upgrade to woodWOP 6.0

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work Pjdpfx Asy Hrh Tjmgogk With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: ready for operation (used), Year of construction: 2012, workpiece width (max.): 60 mm, product length (max.): 7,845 mm, Edgebander manufactured in 2012. This HOMAG KAL211 Edition 2264 features a working height of 950 mm and accommodates workpiece thicknesses from 8 mm to 60 mm. It includes various units such as a gluing unit, joint trimming unit, and pre-milling unit, enhancing its versatility. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL211 Edition 2264 machine we have for sale. Contact us for further details regarding this machine. • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7845 mm • Workpiece width (min): • 60 mm at 12–22 mm thickness • 105 mm at 23–40 mm thickness • Workpiece thickness: 8–60 mm (extended via options • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total load current: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Aggregates/units: • Separation agent spraying unit (top/bottom) • Joint trimming unit (2 motors, 4 kW each) • Gluing unit A20 with 2 rollers (Quickmelt system) • PU65 application unit (exchangeable, Teflon coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) Pgodpfxey Hi Eio Amgek • Pre-milling unit BF10 (1.5 kW) • Multi-profile form milling unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spraying unit Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the top pressure beam

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Pedew S Dmdopfx Amgegk Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Pgedpfoy E Npfsx Amgsk Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 Podpfoygtbmox Amgsgk No of Cross Cut Grippers: 4

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Colour: Grey Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed Pedpfx Amoy Ewv Tegsgk - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels