Chopper

Hokutech H 600

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm Fjdpfx Aheutmw Hjaogf 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Fjdpfx Ahjw I Ar Rsaegf Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Fgjdpjvwfhcefx Ahasf

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Fgodpfevyp Avex Ahaef Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: used, Shredding Machine LINI LW 40 - used - Hydraulic feed, Fodpowi Stnjfx Ahasgf PLC control, ----- Technical Specifications ----- Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rotor length: 600 mm, Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen hole size: 15 mm.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Fgsdpfx Aey A Iv Eehajf Radio remote control

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: Fgodpfx Ahjyfw D Nsasf - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Fgjdpfjznnf Uox Ahajf Delivery terms: ex warehouse