Bottle ejector

GM

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A Hjdpfx Afjlatz Deaofc - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, Year of construction: 2009, functionality: fully functional, COMPLETE PET BOTTLING LINE KHS Product: Still Water Speed: 32,000 BPH Year: 2009 Cap: Corvaglia 29/26 Preform Hopper Preform Elevator Preform Orientator PET Blower KHS Model: Blowmax 16S Series IV Compressor Chiller Filling Monoblock: Filler 50 mechanical valves Type of filling: gravity Capper including elevator and orientator Type of cap: pre-threaded plastic Cap size: Corvaglia 29/26 Distribution system: pick & place Labeller PE 1 roll-fed station Mechanical cam plates Hfedpfsx Tpygox Afasc Bottle inspector Shrink Wrapper Version: film launch Bundle 6x4 Palletizer Alvey 881 Type: push system Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of wrapping: Rotating arm Pre-stretch Code: NP 695

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Hfedjxfbczspfx Afajc

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Hfodpfx Afewufzcoasc

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Hfodpjwb E S Ijfx Afaoc

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hsdsvrfivjpfx Afaefc

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hsdpfowg E D Iox Afasfc

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Hedpfot Ul Exsx Afaofc

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hjdpfx Asl Hx Adjfasfc

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 Hedpfxjw Rddyj Afaefc • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: like new (used), Year of construction: 2018, GM - FB330 Finishing Solution Year of Manufacture: 2018 _____ Machine Specifications and Equipment: HIGH-PRECISION FINISHING MACHINE  Max. web width 330 mm  Min. web width 50 mm  FLAT BED HOT FLOW PRESS UNIT  Speed 6000/H embossing or 10-15m/min  Web width 110mm - 330mm  Substrates 50-200um  Label paper 60-120 g.  UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper  All other substrates must be tested by GM  Polymer (blind embossing ONLY)  Sheet thickness: 5-10mm. 7mm is standard  Backing plate, self-adhesive rubber (1-3mm). SH65  Plate size and type 304.8 x 330mm. 5-9mm magnesium  Plate pressure 30 tons  Foil feed transverse and longitudinal direction (rotating tower)  Temperature contr. 80°-130°C  Heating time 20 min.  SCREEN PRINTING UNIT  Speed 4000/h overlays or 5-15 m/min. Hsdpfx Afsvvmnnsajfc  Web width 110mm - 330mm  Frame size 660mm x 500mm  Frame type 30mm x 30mm aluminum frame  Print area 330mm (length) x 330mm (width) MACHINE: Fully servo-driven line with web tension control. Modular design can be equipped with e.g. hot air drying and inkjet, etc. Modern single-sided housing for easy retraction and maintenance. 1. UNWINDER 2. WEB EDGE CONTROL 3. FLAT BED SHEET IMPACT UNIT 30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality Servo Drive System ensures consistent pressure and embossing time at all speeds Integrated foil saving function Swivelling foil tower can be used on both sides A single module for blind embossing and/or flatbed hot foil The system uses magnesium, brass/sheet metal or polymer plates Plates can be changed while hot using a carriage system 4. SCREEN PRINTING UNIT Servo register system for print marks or optional label distance sensor Pneumatic squeegee with servo movement 5. REWINDER Rewinder for roll diameters of Ø600mm (depending on job/material) Electronic control of speed, position and torque Automatic control of the rewind tension for every speed and all rewind diameters Pneumatically replaceable rewind shaft Ø 76mm Inner and outer winding