Former for nuggets and burger production

GEA CFS Koppens MLF400 MultiFormer

Condition: good (used), 400mm wide screw feed former with control screen upgrade by GEA. Has been used for production of vegetarian burgers. Can be supplied with other machines to make a complete coating and frying line. Fedpfxex Almfo Af Dopc

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h Fjdpfxexz Eacj Af Djpc - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Fedpfxskvni Ae Af Djpc Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil

Condition: used, functionality: fully functional, The FRIGOSCANDIA FF-2-RMA IQF (Individual Quick Freezing) tunnel freezer is a continuous freezing system designed for Fsdpfx Ajwn Hd Sof Depc food products that require individualized quick freezing, such as seafood, fruit, vegetables, sliced meats or pre-cooked products. Its linear design with forced air flow guarantees homogeneous cooling, avoiding block formation and preserving product quality. Applications: Fishing industry: Shrimps, prawns, fish fillets, mollusks. Fruit and vegetable industry: Whole or chopped fruit, vegetables, pulses. Meat and meat preparations: Meatballs, chicken strips, vegetable burgers. Precooked products: Pasta, rice, ready-to-cook mixes. Production depends on the product, in peas for example it would give: 850 kg/h. Inlet temperature: +15ºC Outlet temperature: -18ºC Production may vary depending on the product.

Condition: good (used), 600mm MultiFormer direct from meat-free factory, fitted with optional BridgeBreaker. Other 600mm machines available from same line. Fsdpfxov H D N Do Af Depc

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 5000065442, Product number: 2414J Fodpfeiphrpsx Af Depc Type: UNIMIX I V 3500 Serial number: 5000065442 Year of construction: 2007 Mixer: 3500 litre double paddle mixer Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 41kW Dimensions: 3650 x 2100 x 4300 mm With (N²) nitrogen injection. Mixer on weighing cells

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm Fpodpfjb A Htiox Af Doc -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Line Width: 660 mm Fpjdpfx Asvl Evvef Dsc Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg

Condition: used, functionality: fully functional, total length: 2,750 mm, total width: 1,650 mm, total height: 2,630 mm, overall weight: 1,800 kg, The GEA Multi Former MLF 400 is a state-of-the-art machine designed to shape a wide range of food products with precision and efficiency. Thanks to its advanced technology, it guarantees fast, uniform production, ensuring high output while maintaining consistent product quality. In fact, this former is ideal for products such as dumplings, hamburgers and patties, with a flexibility that easily adapts to different types of raw materials. What's more, the GEA Multi Former MLF 400 is designed to maximize production efficiency, while minimizing material waste. Moreover, its intuitive, ergonomic operation makes it easy to get to grips with, reducing downtime. What's more, this machine is built to meet strict hygiene and safety standards, making it easy to maintain and guaranteeing clean, continuous production. In short, the GEA Multi Former MLF 400 is a reliable, high-performance solution for food companies seeking to optimize their manufacturing processes while ensuring consistent, high-quality results. Technical specifications: Type: 400 MLF Fpedpju E Rgkofx Af Doc Hopper capacity: 320 L Maximum forming weight: 1.1 Kg. Maximum output: 65 cp/min. Belt speed from 1.5 to 15 m/min. Output height from 1015 to 1143 mm. Machine weight: 1800 Kg. Power: 23 kW. Air supply 6 bar, 300 L/min. Water supply: 4 bars. Noise level 84.5 db. Dimensions (L x W x H) : 2752 x 1652 x 2636 mm PLC programming.

Condition: like new (used), Forming machine Type VM 400 HD Forming plate width - 400 mm Output conveyor width - 400 mm Loading hopper volume - 70 liters Fsdpeumlfiefx Af Dspc Productivity approx. 30 tacts per minute Hydraulic movement of the forming tool Machine dimensions in cm: Width: 80,0 Length: 225,0 Height: 215,0 Installed power: 7,8 kW Voltage: 380 V, 50Hz Weight: 550 kg