Web offset printing press

Gallus TCS 250

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Rodpfx Afjvfx A Aj Ssck Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 Rodpfx Aouhtg Aef Ssck - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Year of construction: 2005, condition: good (used), GALLUS TCS 250 (4-color Offset+ 1 x Flexo coating)  Year of construction: 10/2005  Unwind  Rewind Rcedjlua Hiepfx Af Sek  Offset printing units: 5 printing units (due to defective control unit, power supply, dampening unit motor not fully functional)  Coating unit: 1 flexo printing unit for coating  Punch: 1 x flat punch  size: max 270mm  size: min. 166mm  Flat bed die cutting unit  Software and controller version: V01

Year of construction: 2000, condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Rcodpedv Nigjfx Af Ssk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Ryobi 525 GX Highpile Rcsdpfx Afsxwhtqj Sjk Year 2007 60 mill. impressions Equipped with all washers Ryobi PCS-H Printing control system Ryobi SPC Ryobimatic Continuous dampening system Technotrans cooling/circulation device IR Dryer

Year of construction: 2000, condition: like new (used), Gallus TCS 250 Age: 2000 Available: Immediately Size : 254 mm - Size Length ;max.: 254 mm; min.: 101.6 mm - Stock: Paper:100 to 180 g/m² Cardboard: up to 300 g/m² , max. 0.3 mm Thickness - 2 Letter Printing Units - 1 Flexo Printing Unit - 3 UV Drying Units Type Uviterno - KB Rotary Die Cutting Unit - Magnetic Cylinders: Z72,74,76,78,80,84,88,92,96,100,104,108,112,116,120,124 Rodpjgy H Axjfx Af Seck - Unwinder with Roll Diameter 1.040 mm - Web and Side Trimming Unit - Webguide - Rewinder with max. roll diameter 300mm - Speed up to 11.000 printings / h - Touch Screen

Year of construction: 2005, condition: like new (used), Gallus TCS 250 Label Printing Machine Year of Manufacture: 2013 Rsdjvw R Eajpfx Af Ssck _____ Machine Specifications and Equipment:  Unwinding with web control, cleaning and corona unit  1 screen printing unit (semi-rotary)  5 offset printing units (semi-rotary)  1 foil stamping unit (semi-rotary)  1 screen printing unit (semi-rotary)  1 relief embossing unit (flat)  1 punch (flat)  Matrix take-off and 2 rewinders The machine was put into operation in 2005 and the relief embossing unit was added in 2008. The machine was completely overhauled in 2017. As part of this, the control system was also replaced and upgraded to the latest version 3. It is currently still in full operation and in good condition. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment)

Condition: like new (used), Year of construction: 2015, Manufacturer / Model: GALLUS EM 280 Rodexn S U Hopfx Af Sjck Type: 6-color flexographic printing press with UV curing and converting units Year of Manufacture: 2015 Web Width: n/a Location: Labelpresshop Condition: Used – fully functional, very clean condition _____ Configuration Unit Description / Details 6 × Flexo printing units Equipped with GEW UV curing (6 UV stations) 1 × Turn bar Installed 1 × Die-cutting unit Standard rotary die station 1 × Label shifter Installed 1 × Hot foil unit Can also be used for cold foil 1 × Screen printing unit Installed Unwinder / Rewinder Integrated Web guiding system Installed CE Marking Machine CE-certified UV system 6 × GEW UV dryers

Year of construction: 2023, condition: excellent (used), RIETSTACK IRS modular equipment - IRS 430 Maximum web width - 420mm Maximum mechanical speed - 200m/min Electric power 3x400V 50 Hz (5P-32A) Compressed air 6 bar Module unwind unit equipped with: Pneumatic unwind spindle - 76mm Maximum unwind diameter - 800mm Micro-processor control system Electronic counter (labels/meters) Splice table with 2 pneumatic clamps Precise adjustment of rewind and unwind web tension Rcsdpoxc Ivpefx Af Sjk Electronic correction of web tension on unwind Flag detector Automatic stop at roll end De-curl-bar-unit Web guide BST Splice table with 2 pneumatic clamps Module for die cutting station Modified to work with BOBST M5 magnetic cylinder Die cutting station standard (including matrix rewinder) Maximum working width of magnetic cylinder - 420mm Magnetic cylinder repeat size - 96T-220T Magnetic cylinder one included - 96T Die-cutting unit driven by servo drive Nip roller servo driven Matrix rewind spindle is driven by servo Matrix rewind spindle-diameter - 76mm Maximum rewind diameter-matrix - 600mm Matrix pneumatic pressure roller Hydraulic pressure read out 2 clocks Modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. Matrix pneumatic pressure roller Nonstop stacker running max. 4 streams Delivery conveyor servo driven with vacuum belts and vacuum pump Simco antistatic bar: 3 pcs Max. width 420 mm Max. stack length 630 mm Max. stack height 120 mm Max. stack speed 80 m/min Stack height control by counting the sheets in the stack Speed dependable on material Stacks delivery by pushout system Stacker running full automatic continuous running mode Min size for ready stacks production is 50x50mm Smaller labels can be collected at the end of the conveyor Electric power 3x400V 50Hz (5P-16A) Compressed air 6 bar Control panels with HMI touch screen panels

Condition: used, Year of construction: 2003, Flexographic label printing machine GALLUS EM 280 • Unwinder • EL web guide • Corona treatment • Contact web cleaner • Delam-relam • Turnbar • 8 flexo units • 8 UV dryers • Cold foil unit • 2 Die cutting units • Waste matrix rewinder Rcsdpfoxr Didjx Af Sek • Sheeting unit • Camera view system