Compensating stacker

Gaemmerler KL 540

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Iijdeh Nrh Uspfx Agqei Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: ready for operation (used), Size: max 750 x 1.050 mm Iiedpfx Agod N D Nvsqsi min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Weight: 850 kg (approx.)

Condition: reconditioned (used), Year of construction: 2016, Equipment: 4 in one shovel, Casemaker "BookJet Edition" - processing Hotmelt - board centre strip magazine Iiodpsv Adazsfx Agqei - board centre strip cutting device

Year of construction: 2012, condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Iisdpfxeflmc Nj Agqei

Condition: excellent (used), Year of construction: 2021, Casing-In Machine - photo book block splitter - Hotmelt nozzle gluing unit for joint gluing - Nordson premelter - Code-Matching - double case control - special equipment for the processing of flexible cases Iedjvr S H Ijpfx Agqsii

Condition: reconditioned (used), Year of construction: 2006, Casemaker - device for processing center strip rolls Iedjv Uh Nkepfx Agqjii - processing hot-glue - viscosity control device - board center strip magazine - board cutting device PS - device for producing quarter-bound cases in 2 passes - device for processing of asymmetric cloths

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Iiedpfx Agshwwyrsqsi Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Iiodpfxog Du Aus Agqoi Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Machine no: 34, Books produced: 2 million Iedpswnqtkjfx Agqjii

Condition: used, Year of construction: 2008, Three knife trimmer automatic with integrated pre stacker Built in 2008 - Color monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Mechanical speed 1,000 to 7,200 cycles/hr Sizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8") (Spine length x booI' width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16") Sizes trimmed Standard Size Maximum 304 x 303mm (12" x 11 7/8") Iijdpfxevdqt Ro Agqsi (Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4") Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16") Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Minimum 2mm ('/.") Power consumption 20 kVA Compzossed air connection 40 Nm*/h at 6 bar Exhaust 2100 Nm'/h at v = 25 mls Wei ht 5500 (12 125 bs )