Flexo Printing Machine

Fischer & Krecke Flexpress 16S-8

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 259747, Size 516mm, roll-to-roll digital printing machine for labels, etc., Xeikon X800 front end mypress: incl. barcode and trapping software, Hunkeler unwinder, airshaft, ultrasonic webguide sensor, GEW UV dryer, 3 slitting knives, GM rewinder, Corona Plus. Njdpfoy Rywwex Aphedb

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear Ndsdpfoy Ey Niex Aphsb - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: CK 898, total width: 2,100 mm, total length: 8,500 mm, total height: 2,300 mm, cutting length (max.): 560 mm, type of input current: three-phase, overall weight: 5,000 kg, W&H Matador 30 - CK 898 flat paper bag making machine, 1970s Brand: W&H Model: Matador 30 - CK 898 Year: 1970s Equipped with QMS 900 in-line printer (4 colors) Ndedsy Icv Dopfx Apheb Fitted with new printing cylinders, anilox rolls, and rubber rolls for all 4 printing stations. The electrical system has been replaced, and it features a new three-phase main motor with inverter, a mechanical and electric brake system, as well as a dedicated glue system with its own motor drive. Maximum paper width: 830 mm Maximum roll diameter: 1000 mm Inner core diameter: 70/76 mm Speed: 100–180 bags/min Forming plates: 115, 140, 190, 220, 300 mm Printing cylinders: 4 x 280, 2 x 350, 2 x 410, 2 x 480, 2 x 560 mm Machine can be inspected in production Available immediately

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Ndedpoyn Sclefx Aphjb Web width: 520 mm Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Nodeywl D Nspfx Aphjdb Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: used, offer for central drum flexo press FLEXOTECNICA NG10 from year 2009 with 1280 mm web width Ndjdpfx Apey Sfcnshjb

Condition: used, Year of construction: 2008, Web width: 1320 mm Printing width: 1300 mm Printing repeat: 450 mm - 900 mm Unwinder type: Double Unwinder diameter: 1000 mm Rewind unit type: Double Rewinder diameter: 1000 mm Rewinder and unwinder: non-stop operation Maximum printing speed: 350 m/min Nsdpfx Aey Ty Uzophodb Drying system: oil-based (oven not included in the machine) Printing capability: 8+1 (reverse printing of 8 sets) LEL concentration detection system Additionally: Corona treatment Printing support: ESA 24V ACE – upgraded in 2021 Viscometer system on printing stations Eltromat BST print control system – upgraded in 2019 Two BST cameras for viewing the print from both sides of the film – upgraded in 2016 Automatic CO2 fire extinguishing system Allen Bradley drive train communication module replacement – 2020 Shafts for hollow cylinders, screwed – 25 pcs Shafts for hollow cylinders, folded – 18 pcs Pressers (sleeves): 126 pcs

Condition: ready for operation (used), Year of construction: 2001, Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible. Nedpfx Apjzuktuehsdb

Condition: good (used),

Condition: used, Year of construction: 2001, - 4 x Flexographic printing unit - 4 x UV curing system (GEW) - BST bkr 1000 web guiding system - Camera inspection system - 2 x Rotary die-cutting unit - Slitting unit Ndedpfezz Hplox Aphob - Anilox roller with (68/72/78/80/88/96/102 cells) + matching magnetic roller - Additional accessories, if available