FAMIX FAMIX 30000 Mixer (2008)

FAMIX Mixer

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h beverage   6-component mixer  Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 measurement  CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz  Control voltage 42V AC  Cgsdpfx Aaovcp U Rjqjn

Condition: new, Year of construction: 2025, functionality: fully functional, Semi-automatic bag-in-box filler as a table-top unit made of stainless steel; Plastic control cabinet with multifunctional display; Height adjustment of the filling device; Lever for cap manipulation; Cjdpfeq H Aygsx Aaqjgn Filling valve control electric, therefore compressed air not required. Filling by pump, quantity measurement by flow meter; Power supply: 230V, 50 Hz Dimensions: approx. 670 x 820 x 670 mm (L x W x H) Capacity: approx. 600 l/h with 5 l bag

Condition: used, Used PET Complete Bottling Line for Water – CSD – 18000 bph represents a highly efficient industrial solution for bottling and packaging still water, sparkling water, and soft drinks in PET containers. This system is engineered to sustain a nominal output of 18,000 bottles per hour in the 2-liter format, providing high operational flexibility even for different bottle sizes with the use of optional format conversion kits. The entire production cycle of the Used PET Complete Bottling Line for Water – CSD – 18000 bph begins at the preform feeding area, where an automated system consisting of a hopper, tipper, and preform feeder manages the accumulation and efficient transfer of preforms to the blow molder. The blow molding module, equipped with fourteen cavities, employs heating and high-pressure blowing to ensure maximum dimensional and mechanical uniformity of the bottles, optimizing the production throughput of the line. Transfer of the freshly blown bottles to the next stages is managed by stainless steel air conveyors, which ensure gentle and orderly transportation without risk of deformation, enabling seamless integration between the blow molding and filling sections of the Used PET Complete Bottling Line for Water – CSD – 18000 bph. The sizing of the conveyors, speed regulation, and centralized automation are designed to support the continuous productivity demanded by the beverage industry. Core of the line: filling, capping, inspection, and coding The line is equipped with a premix system for the preparation of CSD and sparkling water, including mixing and carbonation stages. It is designed to integrate CO₂ management and ensure production stability. The functional core of the Used PET Complete Bottling Line for Water – CSD – 18000 bph is the isobaric filling monoblock, paired with a rinsing station for sanitizing the bottles at infeed. Isobaric filling technology allows the handling of both still and carbonated products, providing dosing accuracy and operational versatility. In particular, the presence of a nitrogen dosing system downstream of the filling phase optimizes product shelf life and quality by reducing oxygen content and ensuring stability for sparkling water and CSD production. The capping phase uses a rotary capper supplied by an automatic cap elevator, with integrated systems to verify the correct application and presence of the cap. The system’s high reliability is ensured by mechanical synchronization between stages, minimizing the risk of errors even at high speeds. Food safety is further supported by targeted technical solutions that maintain product protection throughout every processing step. Quality inspection along the Used PET Complete Bottling Line for Water – CSD – 18000 bph is handled by multi-level optical vision and electronic control systems. Cgedpfx Aajw D E Ubsqjn

Condition: ready for operation (used), Year of construction: 2009, Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible. Csdpfx Aaovtqrroqjgn

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Cgjdpfx Aaex H Tilsqon Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Cgodpfx Ajwz H Ahoaqjn

Condition: used, Item: LC-13470-UV-Clean Industrial UV Treatment System – Complete Unit Complete industrial UV treatment system for non-thermal processing of liquid products. Suitable for juice, beverage, food, and process water applications. - Stainless steel UV reactors - UV power & control unit included - Food-grade, hygienic design - Continuous inline operation - Preserves taste and product quality Main Components: Csdpfjx It Rfsx Aaqogn - Stainless steel UV reactors (inclined design) - UV lamp housings with quartz sleeves - UV power & control unit - Electrical cabinets and control panel - UV lamps, cables and accessories (included) Technical Features: - Food-grade stainless steel construction - Non-thermal UV treatment - Continuous inline operation - Hygienic design, easy to clean and service - Suitable for integration into existing production lines Condition: Good, dismantled and stored on pallets Availability: In stock, ready for delivery

Condition: used, Year of construction: 2001, Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s. Capacity: 40000 bo/h Pneum. working pressure: 10 bar Cedpfx Aexbqg Ueaqogn Power: 11 kW Current: 25 A Voltage: 230/400V, 24V control voltage Frequency: 50 Hz Length: 2900 mm Width: 1260 mm Height: 2000 mm Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps Operation / Control: Simatic S7 Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet