Screening Machine

Dinnissen CZ-6

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: Predpfxex Ac Rbs Abaoc ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Prodpfozfwvwsx Abajc Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg Prodpeufy S Hjfx Abajc

Condition: ready for operation (used), A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible. Pjdpfx Ajyttw Iebajrc

Year of construction: 2015, condition: excellent (used), Very well-maintained Kek Kemutech Gardner K650 C. Includes platform, valve housing, and magnet. Podpoyy N U Rofx Abasrc 1 unit available.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 770 mm, total height: 420 mm, overall weight: 300 kg, power: 3 kW (4.08 HP), type of input current: three-phase, motor manufacturer: Euronorm, Rotary Sieve Type KZ800 Available from stock: "Rotary Sieve 300" for all types of processes. Product inlet dimensions: 250x250mm. Sieve basket size: Ø 800 x 300 mm. The "Rotary Sieve 300" has been processed by "ViwateQ". The machine is fully welded both inside and out. For further questions or photos, please contact us! Pjdpfsxtvnujx Abajrc A.J. van Velthuizen Metaalbewerking

Condition: like new (used), Depureco DF FIX SP explosion-proof (EX) industrial extractor with few operating hours, brand new Manufacturer: Depureco Type: DF FIX SP 75 (ATEX Z22 explosion-proof) Power: 7.5 kW (three-phase, equipped with centrifugal fan) Power supply: 400 V / 50–60 Hz Maximum air flow: 3900 m³/h Maximum vacuum: 575 mmH₂O Static suction power: 539 mmH₂O Collection capacity: 175 liter, detachable, wheeled metal container Filter surface: Standard 45,000 cm² "M" class polyester filter Cleaning system (SP): Automatic compressed air (jet-pulse) counter-current filter cleaning - cleans continuously during operation the cartridge. (PSC) Dimensions: 1670x850x1980mm Pedpfxezy N S Hj Abaorc Weight: 220kg

Condition: used, Gericke centrifugal sifting machine, sieve Type: E650 Predpfxeyuav Tj Abasc Motor power: 2.2kW Basket diameter: 180mm x L 630mm Complete stainless steel construction Internal parts removable for machine cleaning