Glass Edging Machine

BAVELLONI CR1111

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem Njdperhilxofx Aphjdb o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: good (used), Year of construction: 2008, 10 cup wheels vertical glass edging machine with variable angle 0-45° total number of woreking meters : 179.000 min. glass size height : 70 mm Ndjdpex Hvxpofx Aphob speed : 0,5 - 5 m/min. glass thikness : 3 - 50 mm machine dimensions : L x W x H : 8,8 x 1,2 x 3 m weight : 4300 Kg

Condition: good (used), Year of construction: 2010, Straight line edging machine - mitering from 0° to 45°, SCHIATTI Type FPS SME 10, Year 2010 Nodjwrdfzspfx Aphjdb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Nsdeylaqlspfx Aphsdb Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° Nodpfx Apotqr Hpehodb - 13 grinding and polishing wheels - Complete documentation available - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: good (used), Year of construction: 2009, 11 spindle motors. Glass thickness: 3 to 30 mm. Nsdsvk Ed Repfx Aphjdb Minimum glass size: 85 x 150 mm. Speed: 0.5 to 5 min. With water basin and pump. Working direction: from right to left. Working height: 780 mm. Total length: 8520 mm. Depth: 1130 mm. Total height: 4850 mm.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04121522, total length: 10,000 mm, total width: 2,300 mm, total height: 1,500 mm, overall weight: 6,200 kg, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, power: 34 kW (46.23 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 14-45 Year: 2004 Power: 34 kW Voltage: 380 V Frequency: 50 Hz Weight: 6200 kg Machine type: Glass straight line edging machine Application: Grinding and polishing flat glass edges Origin: Italy Applications Suitable for: • Flat glass processing • Mirror manufacturing Ndedpfxjyw Udre Apheb • Furniture glass production • Architectural glass • Interior glass elements • Glass fabrication workshops

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Nsdpfx Apjv D Rg Djhodb Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, machine/vehicle number: 008431, X axis working area: 6360 mm Y axis working area: 1905 mm Nodpfxeym Rphe Aphsdb Working Table: Pod and Rail Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 60

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02022512, total length: 8,200 mm, total width: 1,200 mm, total height: 2,300 mm, overall weight: 3,400 kg, type of input current: three-phase, input voltage: 380 V, working height: 900 mm, power: 30 kW (40.79 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 10 Machine type: Glass straight line edging machine Year: 2002 Power: 30.5 kW Voltage: 380 V Frequency: 50 Hz Weight: 3400 kg Machine configuration: Straight line glass edging and polishing Origin: Italy Nodsyw Ucbjpfx Aphedb Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass fabrication • Interior glass elements • Glass workshops and factories