The ARBOR Automatic Stacker

ARBOR

Condition: new, Year of construction: 2024, functionality: fully functional, Palette board stacking machine Tech characteristics: 1. Dimensions of the processed material (mm) Nlodpfxor E Abvo Af Eoh • length - 800-1400 • width - 60-200 • thickness - 14-50 2. Maximum package dimensions (m) • length - 1.4 • width 1.2 • height - 1.3 3. Material feed speed (m/min.) - 50 4. Packing speed (layers per minute) 5. Pneumatics • Compressed air pressure (bar) - 5-6 • Compressed air consumption (l/min.) 30-40 6. Service staff (number of people) - 1 7. Total installed power, kW - 8.2

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Offer includes. 1. Weinig high speed 820 right angle moulder outfeed. 2. Weinig 811 moulder outfeed, scissors lift with pack chains 3. Weinig additional outfeed pack chains to transfer to a roller conveyor system. Nodpfoxftvaox Af Eelh System of operation. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Year of construction: 2025, condition: new, The Unstacker Fully automatic destacker Nljdpfxshbr Ufo Af Ejh Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Fully automatic destacker and feed table Nljdpfxov H R Dhj Af Esh Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Njdpfx Afjzvy Eij Ejlh

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, feed rate X-axis: 40 m/min, overall weight: 900 kg, roll diameter: 35 mm, total width: 6,000 mm, total length: 2,500 mm, total height: 1,200 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, roller diameter: 140 mm, transport height: 1,200 mm, transport length: 2,500 mm, transport width: 1,250 mm, input frequency: 50 Hz, power of feed motor: 1,500 W, This video demonstrates the feeder of a four-side planer processing an oak board. Njdpfxoyftgao Af Ejlh Technical specifications: Feeding speed: 5-60 m/min Minimum board length: 1.2 m Maximum board length: 6 m Minimum board width: 40 mm Maximum board width: 300 mm Minimum board height: 10 mm Maximum board height: 120 mm Number of feed rollers: 2 Feed drive power: 1.5 kW each Chain conveyor drive power: 1.1 kW Feeders can be equipped with chain conveyors featuring various numbers of chains, different chain spacings, and conveyor lengths to suit specific requirements. ARBOR also offers design and manufacturing services for sawmill and woodworking lines of any complexity.

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Open size (without legs): 1700 mm Nledpeik Hbzjfx Af Eeh Excluding hydraulic unit! Quantity: 1 unit Price/unit

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Power: 45 kW Nlodjyyldzspfx Af Esh !! Sale on behalf of customer !! Available from summer 2026

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Nljdpfob A Sqdsx Af Eeh -Outer diameter: 200 mm -Number: 5 milling cutters -2x: left -3x: right Price: complete -Weight: 6 kg/piece

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: - Spindles: 4 + 2 Nlsdpfx Ajzrxzujf Esh - Working width: 230 mm - Working height: 120 mm - Spindle 1: 7.5 kW / 50 mm / 8,000 rpm - Spindle 2: 11 kW / 50 mm / 8,000 rpm - Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm - Spindle 4: 7.5 kW / 50 mm / 8,000 rpm - Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Feed rate: 5–24 m/min - Control: Nexus PC control - NC axes: Unimat 2 & 3, Uniplan 1