Capsule rolling or shrinking with labelling

Albagnac EURO 2000

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. Kedpfx Ajdy Ewljd Njll • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns.

Condition: new, Bar Transferred Conveyor Systems These are conveyors which provide to be manually or automatically transferred among required processes until completion of the surface finishing and painting processes after the product to be painted is hung to the conveyor. Application of the processes can be carried out automatically based on the demand and the project. It provides a considerably high space and energy saving compared to continuous conveyor systems used in the facility where full automatic systems are operated. Based on the product weight, closed type Cardan and IPN rails can be used. Klodpfxsdy Ey Dj Ad Nel • These conveyor systems, which have a wide range of carrying capacity, can move manually or semi-automatically vertically and horizontally, allowing the bar transport between processes. • This system provides higher efficiency in smaller installation spaces with low fuel consumption. • It works in the Power & Free conveyor logic, but is less costly and semi-automatic. • It is easier to hang heavy items on the moving bar with the elevator unit that can be integrated into the system.

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection Kljdpfoxnbk Dex Ad Nsl With sieve and suction connection with filter

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Kjdpfxexzqulo Ad Njll Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Condition: used, Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile packaging machinery set-up is ideal for beverage production facilities seeking to expand or replace an existing second hand line with dependable equipment and consistent output. Technical Specifications & Performance Data Production speed: 12,000–16,000 bottles/hour Primary product: Water Kljdpfx Adsxywgls Nel Container type: PET Bottle format: 1.5L Preform tipper and elevator: Sameto Technifil EBH 2050 (2010) Blow molding machine: Siedel SBO10 (2010) Filling machine: Alsim Asmojet (1999) Cap feeder: Arol Labeling machine: Kronos Contiroll (2004) Shrink wrapper: ACMI Fenix 165 (2019) Handle applicator: Smipack HA50 (2002) Additional units: Mixer, palletizing, conveyors Advanced Automation & Control Systems The line architecture supports synchronized operation across blow molding, filling, labeling, and end-of-line packaging through standard industrial control interfaces. Individual machine HMIs typically enable format-related adjustments, recipe selection, and real-time status monitoring. Safety interlocks, guarding, and emergency stop interfaces allow integrated stop/start logic across conveyors and processing units for consistent flow and minimal downtime during production. Production Line Integration Capabilities This complete line is designed for inline operation with continuous bottle flow from preform handling through to palletizing. Included conveyors facilitate smooth transfers between machines, helping to maintain stable throughput at the specified performance range. The configuration is suited for PET water bottling at 1.5L and can accommodate typical beverage production requirements for industrial packaging. Integration with upstream preform feeding and downstream logistics is supported by standard mechanical and control interfaces. Machine Condition & Maintenance History Offered as a second hand used bottling line, the equipment mix spans manufacturing years from 1999 to 2019. The line is presented for sale in working condition and is suitable for recommissioning for beverage production.

Year of construction: 2015, condition: excellent (used), W x L: 73x300 cm, with cage H 200 cm, transport with 125 cm with cabe Kedpfeu Atnxox Ad Noll

Condition: used, KRONES AG Monoblock (with Sauerstein SD 1500/1100/950 unit and KRONES cooling device Manufacturer KRONES AG – Neutraubling, Germany Type Stainless-steel guarded industrial monoblock (in-line integrated unit) with process and cooling auxiliaries Industrial Applications KRONES in-line unit for automated packaging environments requiring a protected enclosure, continuous conveyor operation, and integrated auxiliaries. The configuration shown includes a Sauerstein air unit and a KRONES cooling device for thermal control of integrated equipment/cabinets. Main Technical Specifications Air unit (Sauerstein nameplate) - Brand: Sauerstein - Type: SD 1500/1100/950 - Reference (Kom.): 10.462 - Year (Baujahr): 01/10 Cooling device (KRONES nameplate – Kühlergerät) - Part-No: Serial-No: M6530292550 Klodpfox N Utdsx Ad Njl - Supply: 230 V, 50/60 Hz, 2~N - Rated / start current: 1.5 A / 3.2 A - Power input: 315 W - Cooling capacity: 320 W - Refrigerant: R134a, 96 g - Protection rating: IP54 / IP24 In/Out - Max pressure: PS35 / PO30 bar - Year: Fuse: 6 A T - Operating range (min./max.): 20 °C – 55 °C - Internal minimum setpoint: 35 °C - Weight: 13 kg - Manufacturing: Malta (European Union) - Markings: CE, cRUus Machine Usage This KRONES monoblock is an in-line integrated unit designed for industrial operation within a guarded enclosure. The identified auxiliaries provide process support functions, combining air handling via the Sauerstein module and dedicated cooling via the KRONES unit to maintain thermal stability of on-board equipment. Features / Differentiators - Guarded stainless-steel monoblock design suited for automated production areas. - Integrated KRONES cooling device with 320 W cooling capacity and R134a refrigerant, engineered for industrial duty (IP54). - Full traceability of auxiliaries through part numbers and serial numbers (Sauerstein SD 1500/1100/950, KRONES , M6530292550).

Condition: good (used), gravimetric Brabender dosing unit 3 units for sale However, the load cells are defective so that the dosing unit can only be used volumetrically. Klsdpfx Adjufx Tij Nsl

Condition: ready for operation (used), Transport width: 4800mm, format: 0.25/0.5/0.7/1l, output: 38,000 bottles/h, with documentation and accessories. Kjdporkn Uwofx Ad Nsll

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Klodpfsxqgf Ejx Ad Nsl