I-Beam Type Hanger Conveyors

PROTON Webb Type

Condition: new, Bar Transferred Conveyor Systems These are conveyors which provide to be manually or automatically transferred among required processes until completion of the surface finishing and painting processes after the product to be painted is hung to the conveyor. Application of the processes can be carried out automatically based on the demand and the project. It provides a considerably high space and energy saving compared to continuous conveyor systems used in the facility where full automatic systems are operated. Based on the product weight, closed type Cardan and IPN rails can be used. Ljdpfx Afedy Ey Do Seta • These conveyor systems, which have a wide range of carrying capacity, can move manually or semi-automatically vertically and horizontally, allowing the bar transport between processes. • This system provides higher efficiency in smaller installation spaces with low fuel consumption. • It works in the Power & Free conveyor logic, but is less costly and semi-automatic. • It is easier to hang heavy items on the moving bar with the elevator unit that can be integrated into the system.

Condition: new, POWER&FREE CONVEYOR SYSTEMS Ltjdedy Eyvopfx Af Ssa Overhead Power & Free Conveyors have free trolleys that are driven by power chains and carriers that transport the material to a given location. The carriers are attached to the free trolleys and are normally engaged to the power chain by an attached pusher dog assembly on the free trolley. The pusher dog can be disengaged by a cam action in either the free trolley or the chain dog, caused by accumulating behind another free trolley or by engaging a stop blade. The chain continues to move while the carrier becomes temporarily stationary until the free trolley becomes re-engaged with the chain. Applications Accumulating Assembly Bias & Trias Banking Carrier Indexing Elevation Changes Production Rate Variation Sort Start/Stop Storage Transfer Advantages: High strength alloy castings increase life span Stainless steel chain pusher dog Modular designed conveyor components Stops are simple, compact and corresponding to industry standard Computer or programmable control systems Not possible in standard hanger conveyor systems: • Automatic stop and start of the system with the support of switches and sensors • Transferring the transported material to different directions with the help of the scissors on the rails. • Transport at different speeds in different parts of the conveyor • You can easily perform its controls with the PLC control system integrated on the system. • As long as possible, our designs are made by our expert engineering team with the principle of saving more time for your production, establishing an economical system that requires the least maintenance.

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter Ltjdpfsxnbk Dox Af Ssa

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel Ltsdpfsxzqulsx Af Sja

Condition: used, Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile packaging machinery set-up is ideal for beverage production facilities seeking to expand or replace an existing second hand line with dependable equipment and consistent output. Technical Specifications & Performance Data Production speed: 12,000–16,000 bottles/hour Primary product: Water Container type: PET Bottle format: 1.5L Preform tipper and elevator: Sameto Technifil EBH 2050 (2010) Blow molding machine: Siedel SBO10 (2010) Filling machine: Alsim Asmojet (1999) Cap feeder: Arol Ltodpfx Aexywgljf Sja Labeling machine: Kronos Contiroll (2004) Shrink wrapper: ACMI Fenix 165 (2019) Handle applicator: Smipack HA50 (2002) Additional units: Mixer, palletizing, conveyors Advanced Automation & Control Systems The line architecture supports synchronized operation across blow molding, filling, labeling, and end-of-line packaging through standard industrial control interfaces. Individual machine HMIs typically enable format-related adjustments, recipe selection, and real-time status monitoring. Safety interlocks, guarding, and emergency stop interfaces allow integrated stop/start logic across conveyors and processing units for consistent flow and minimal downtime during production. Production Line Integration Capabilities This complete line is designed for inline operation with continuous bottle flow from preform handling through to palletizing. Included conveyors facilitate smooth transfers between machines, helping to maintain stable throughput at the specified performance range. The configuration is suited for PET water bottling at 1.5L and can accommodate typical beverage production requirements for industrial packaging. Integration with upstream preform feeding and downstream logistics is supported by standard mechanical and control interfaces. Machine Condition & Maintenance History Offered as a second hand used bottling line, the equipment mix spans manufacturing years from 1999 to 2019. The line is presented for sale in working condition and is suitable for recommissioning for beverage production.

Year of construction: 2015, condition: excellent (used), W x L: 73x300 cm, with cage H 200 cm, transport with 125 cm with cabe Ljdpfx Afsu Atnxo Seta

Condition: new, Cardan type conveyors are trolley models consisting of 4 bearing groups moving in a closed rail. These types of conveyors are indispensable on lines with their vibration-free movement, automatic lubrication feature and good appearance. Cardan type drive unit is overhead caterpillar type or lateral gearing torque safe. Pitches between the chain hangers are 400 mm and its multiples. Through central lubrication unit on the system, chain bearings automatically perform lubrication process as desired time interval. Torque limiter is used in order to protect the conveyor system when the drive units are compressed and forced. The bearings mounted on the chain are capable of operating at 250°C. The conveyor chain tensioning system can be performed as spring or screwed. The cardan conveyor rail is particularly bent from the sheet. Ljdpfody Eytex Af Seta In long-line conveyor systems, more than one drive unit is used and in such systems, a synchronous operation is provided between the drive units. There are three types as Light Type - Medium Type - Heavy Type based on the need. • Cardan type conveyor is based on moving the cardan chain in three axes on the cardan rail. • Cardan Type Drive unit as: Top caterpillar type or Side gear with torque safe system. • The pitches between chain hangers are 400 mm and its multiples. • Thanks to the central lubrication unit on the system, the chain bearings automatically lubricate at the desired time interval. • Torque limiter is used to protect the system from jamming and forcing of the drive units to protect the conveyor system. • The bearings mounted on the chain are capable of operating at 250 degrees. • Conveyor chain tensioning system is made with spring or screw. • Cardan conveyor rail is specially bent from sheet metal. • In long line conveyor systems, more than one drive unit is used, in such systems a synchronized operation is provided between the drive units. • There are three types according to the needs.

Condition: ready for operation (used), Transport width: 4800mm, format: 0.25/0.5/0.7/1l, output: 38,000 bottles/h, with documentation and accessories. Ltsdpfjrkn Uwsx Af Sja

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Ljdpfxjxqgf Es Af Ssta

Condition: good (used), gravimetric Brabender dosing unit 3 units for sale Ltedpfx Afsufx Tij Sja However, the load cells are defective so that the dosing unit can only be used volumetrically.