Condition: good (used), Bitzer Crsdpfx Aozizpvohtjd Model: S4G-12.2Y-40P Bitzer Refrigeration Compressor / Refrigeration Unit Description: For sale is a BITZER refrigeration compressor / condensing unit complete with pressure vessel and control system. This unit is designed for generating refrigeration or compressing refrigerant in cooling and industrial applications. Typical applications include: - Refrigeration units / cooling systems - Industrial cooling / process cooling - Cold storage / commercial refrigeration - Machine cooling The robust Bitzer compressor is engineered for continuous operation and is renowned for its high reliability. The unit features pressure switches, oil monitoring, and an integrated pressure vessel/heat exchanger. Technical Data: Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model: S4G-12.2Y-40P Receiver tank model: K573H Electrical specifications: Voltage: 400 V three-phase (3~) Frequency: 50 Hz Max. operating current: 24 A Starting current: 69 A / 113 A Protection class: IP54 Performance data: Displacement: approx. 42.3 m³/h Speed: 1450 RPM Max. low/high pressure: 19 / 28 bar Receiver tank: Volume: 29.4 liters Max. permissible pressure: 33 bar Temperature range: -10 °C to +120 °C Approximate dimensions & weight: Length: approx. 110 – 120 cm Width: approx. 50 – 60 cm Height: approx. 70 – 80 cm Weight: approx. 180 – 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), Julabo Model: FP51-SL (v.2) Julabo Circulating Thermostat SL v2 with FP51 Chiller – Heating/Cooling Thermostat Description: For sale is a professional Julabo Circulating Thermostat SL (v2) in combination with the Julabo FP51 Chiller. This device is used for the precise temperature control of liquids and external circuits. It is ideally suited for laboratory, industrial, and test bench applications. The system enables both heating and active cooling, offering stable and accurate temperature regulation. Technical Data (excerpt): Circulating Thermostat: Julabo SL (v2) Temperature Range: approx. +20 °C to +320 °C Thermostat Power Supply: 230 V / 50–60 Hz Chiller: Julabo FP51 Chiller Power Supply: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection Class: IP21 Dimensions & Weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Cedpfjzizn Sox Ahtsrd Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Riedel Type: PC 251.1L4WE.I Riedel Process Chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. Operation requires an external cooling water circuit (e.g. dry cooler, cooling tower, or building's chilled water system). Additional information: Ideal for machine cooling, process cooling, industrial applications Technical data: Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Cjdpfezix Naox Ahtjrd Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Setpoint tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Nominal flow rate: approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Power supply: 3 × 400 V Frequency: 50 Hz Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Condition: used Scope of delivery: (see photo) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), JDK Type/Model: WDE-S1K-15/+ 15°C/004 Industrial Water Chiller JDK WDE-S1K-15/ Chiller | 400 V | R407C Description: For sale is an industrial water chiller / cooling unit (chiller) manufactured by JDK. The unit provides reliable cooling of water or water-glycol mixtures for machines, production facilities or technical processes. It is designed for continuous operation in industrial environments and features an integrated circulation pump, electronic temperature control as well as comprehensive safety and monitoring functions. Technical Data: Manufacturer: JDK Crodpfezix Ivjx Ahtod Model: WDE-S1K-15 / +15°C Year of manufacture: 2021 Supply voltage: 400/230 V, 50 Hz Power consumption: max. approx. 15.5 A Refrigerant: R407C Compressor: Copeland Scroll Mobile on castors Protection class: IP43 Weight: approx. 270 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is provided without guarantee!) If you have further questions, please feel free to contact us by phone.

Condition: used, LAUDA Heat Transfer System ITH350/25kW – Industrial Temperature Control Unit For sale is a high-quality heat transfer system from LAUDA, model ITH350/25kW. Ideal for industrial applications, laboratories, or production processes requiring precise temperature control. Features: - Robust construction, reliable for continuous operation - Precise temperature control over a wide range - IP54 protection – dust and splash-proof Technical Data: - Model: ITH350/25kW - Item No.: LSI 51807 - Mains voltage: 400 V / 3~ / PE / 50 Hz - Power consumption: 28.5 kW - Current consumption: 41 A - Permissible temperature [TS]: +20°C … +350°C Cjdpfx Ahszii T Netjrd - Protection class: IP 54 Heat transfer circuit: - Medium: Marlotherm SH - Minimum flow rate: 1 m³/h - Nominal diameter: DN 25 - Max. permissible operating pressure: 10 bar - Weight: approx. 700 kg - Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Huber Model: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller suitable for laboratory and industrial applications. This unit is designed for continuous operation, providing consistent cooling performance with high energy efficiency. Features & Functions: - Modern touchscreen control with favorites menu, timer, data logging, and remote control options - Robust, closed cooling system for reliable continuous operation - Environmentally friendly refrigerant - Suitable for ambient temperatures up to +40 °C - Ideal for laboratory, chemical, engineering, and process cooling applications Technical Data: - Temperature range: –20 °C to +40 °C - Temperature stability: ±0.5 K - Cooling capacity: - 3 kW at +15 °C - 2.75 kW at 0 °C - 2 kW at –10 °C - 1 kW at –20 °C - Circulation pump: max. 30 l/min at 4.1 bar - Controller: Pilot ONE touchscreen controller (5.7” color display) - Connections: Ethernet, USB, RS-232, Pt100 - Refrigerant: R449A (CFC and HCFC-free, eco-friendly) - Dimensions (W × D × H): 400 × 440 × 1230 mm - Weight: approx. 137 kg Codpozii T Aefx Ahterd - Condition: used Scope of delivery: (see photo) - Huber Unichiller 030TW - Power cable (Technical data and specifications subject to change and errors excepted!) Please do not hesitate to contact us for further questions by phone.

Condition: good (used), TRANE CVGAM100SDAABB0 Air-Cooled Liquid Chiller Manufacturer: TRANE Type: CVGAM100SDAABB0 Product Reference: VGA120SDAA Machine Type: Air-Cooled Liquid Chiller Cooling Capacity: approx. 25.2 kW For sale is a used air-cooled liquid chiller from the manufacturer TRANE. This unit is suitable for cooling process water, machines, production facilities, machine tools, as well as for industrial air conditioning and refrigeration applications. Technical Data Cooling Capacity: approx. 25.2 kW Refrigerant: R407C Refrigerant Charge: 7.5 kg Dimensions: approx. 1,070 × 1,100 × 1,800 mm (L × W × H) Weight: approx. 434 kg Low Pressure (LP): 21 bar High Pressure (HP): 30 bar Electrical Data Fan: 1 × Axial Fan Fan Power: 1.00 kW Fan Current: 3.1 A Compressor: 1 × Scroll Compressor Compressor Power: 11.7 kW Max. Compressor Current Draw: 30.0 A Mains Connection: 400 V / 3 Ph / 50 Hz Control Voltage: 24 V / 50 Hz Cedpfxszib A Ns Ahtjrd Equipment Air-Cooled Condenser Hydraulic Module Integrated Scroll Compressor SWEP Plate Heat Exchanger Water Pump Expansion Tank Carel uC2 Controller Axial Fan Pressure Gauge Main Switch Water Connections Accessories as Shown in Pictures Application Areas Process Cooling Machine Cooling Machine Tools Industrial Plants Production Facilities Chilled Water Supply Air Conditioning Industrial Refrigeration Condition Used Unit was in operation. Visual condition as shown in pictures. Scope of Supply TRANE CVGAM100SDAABB0 Air-Cooled Liquid Chiller Integrated Hydraulic Module Accessories as Shown in Pictures Scope of supply as pictured. Subject to changes, errors and prior sale.

Condition: good (used), We have two of these, the second unit is slightly larger than the model number I have given. they were only used for a short time as the project was cancelled. Crodstq A Nuepfx Ahted

Condition: excellent (used), Clint water chiller, which was cooling tooling for a Multivac thermoformer. Almost new condition. Codpfx Ahjumay Uetord

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Dorin, complete refrigeration compressor cooling unit -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Volume flow rate: 23.37 m³/h -Max. operating pressure: 30.5 bar -Quantity: 2 pieces available Credpfx Ahjif Hunsted Price: per piece -Overall dimensions: 1900/1000/H940 mm -Weight: 304 kg/unit

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Crodpfx Ajziazwohtjd Choice of 4, price per unit.

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Crsdpfozgaa Ijx Ahtjd Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Global warming potential 3985 Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description Credpezcwitsfx Ahtjd The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Csdpfx Ahszd Ruwotjrd Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Crsdjzd Rtyspfx Ahtsd Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Bitzer Bitzer Refrigeration Unit S6F-30.2Y-40P with RO System & Sound Insulation Enclosure – unused Description: A high-quality Bitzer refrigeration unit on base frame is offered for sale, consisting of compressor, water-cooled condenser, sound insulation enclosure, and a reverse osmosis (RO) system including humidification. The system was assembled but never commissioned. Ideal for industrial, laboratory, or special applications. Technical Specifications – Refrigeration Unit Manufacturer: Bitzer Compressor: S6F-30.2Y-40P Condenser: Bitzer K573H, water-cooled Refrigerant: R452A Electrical Data: Supply voltage: 400 V / 3 Ph / 50 Hz Max. operating current: 53 A Starting current (rotor locked): 135 A in star connection / 220 A direct-on-line (YY) Max. power input: 30.1 kW Motor power: 22 kW (30 HP) Displacement: High pressure (HP): 101.1 m³/h Medium pressure (MP): 50.5 m³/h Oil: Oil type: BSE32 Option: BSE55 (with R134a, tc > 70°C) Oil volume: 4.75 l Reverse Osmosis System Type: RO20 (Werner / WeteA) Permeate output: 10 l/h Feed water requirement: 40 l/h Operating pressure: 14 bar Dimensions: 500 × 600 × 295 mm (H × W × D) Sound Insulation Enclosure Height: 2200 mm Width: 2400 mm Depth: 1200 mm Dimensions & Weight (approx.) Complete unit incl. enclosure: (W × D × H) approx. 2400 × 1200 × 2200 mm Total weight: approx. 900–1,100 kg (compressor + condenser + base frame + enclosure + RO system) Condition: used Scope of delivery: (see photo) Refrigeration unit on base frame Bitzer compressor Water-cooled condenser Sound insulation enclosure Reverse osmosis system incl. humidification (Technical data subject to change and errors excepted!) Crodpozd Rttjfx Ahtsd For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Crodpfx Ahsw R Ualeted Year of Manufacture: 2018 Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Water side: 10 bar Operating Conditions: Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm Cjdpfx Ajb Nx Hmehtsrd -Housing: made of stainless steel -Drip tray -Quantity: 1x cooler available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Condition: good (used), We are offering used evaporative coolers here. TECHNICAL DATA Codpfx Aoy Eqduohtsrd Manufacturer: Portacool Model: Pachr360 Functional Condition: used PRICE €2,350.00 net €2,796.50 gross, including VAT Stock: 5 units YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PROJECT DESIGN Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price, as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile warehouses, as well as machines for retail, industry, and trades. We continuously offer you interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, The MDF-C8V1 VIP ULT chest freezer is a compact -80°C freezer that utilizes VIP PLUS insulation to maximize storage capacity and improve energy efficiency. Its single-compressor auto-cascade system provides higher efficiency in a space-saving design. Credpfx Ajzh Ripjhted Key specifications Temperature range: ~-60°C to -80°C (down to -80°C) Capacity: 84 L (3.0 cu ft) Storage: ~42 × 2" cryoboxes Refrigeration: single-compressor auto-cascade (mixed refrigerant) Size and weight External (W×D×H): 550 × 685 × 945 mm Internal (W×D×H): 405 × 490 × 425 mm Net weight: ~67 kg Footprint: ~0.37 m² Features Microprocessor control with digital display and alarms (temperature, power failure) Energy consumption: ~7.2 kWh/day | Noise: ~47 dB(A) Typical applications Storage of DNA/RNA samples, cells, and reagents Small research and clinical laboratories Backup -80°C storage for critical samples

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, input voltage: 230 V, electrical fuse: 10 A, input frequency: 50 Hz, total length: 600 mm, total width: 560 mm, overall weight: 49 kg, tank capacity: 140 l, type of cooling: air, Equipment: lighting, ++ TOP Glass-door Refrigerator K 140 ++ Cedpfx Ahsy Ac Uietjrd Temperature adjustable from +2 to +10°C with LED lighting Refrigerant R 600a DGUV V3 tested, available only from us Connection: 230V Dimensions: 560 x 600 x 850 mm (W x D x H) Unit is in new condition.

Condition: like new (used), Year of construction: 2010, Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg Coolant R410A. 970 g 3 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning. Cedpfxewa R H Uo Ahtjrd

Condition: used, Year of construction: 2015, machine/vehicle number: X859222, This Trane chiller, type ECGWN 211, will be auctioned off online as part of our industrial auction / machine auction for inventory clearance: Siemens Ruhstorf – measuring technology, electrical engineering, office furniture, office equipment, and more. Crsdpfx Aszfyuiehtod You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Credpsfx S Dajfx Ahtsd Refigerant: R407C Refrigerant diagram, operational limits see at the photos! We have15 unit in stock!

Condition: new, Air Cooler, Evaporative Cooler, Indoor Cooling Unit, Used Appliance Manufacturer: Govers Type: ET8 Year: 2004 Dimensions: 2260 x 830 x 260 mm Crsdpfx Ahsqvmzfetjd In manufacturer's packaging, new device.