Used Chillers for sale (342)

Condition: new, Year of construction: 2024, The Cube CAL series are air-cooled refrigeration systems for industrial use. They are installed outdoors, but can also be installed indoors due to the non-flammable refrigerant R513A. The Cube CAL 013 has an internal tank, an internal P3 pump and a coaxial evaporator. Operation can be guaranteed down to a process temperature of -10°C. Cgslrcsr D Sanordyjt Cooling capacity at 7/12°C 35°C ambient temperature 7.9kW

Condition: new, New refrigerated compressor r LOW PRESSURE 19 bar HIGH PRESSURE 28bar bar Cslrjl I Dqascrdyegt 11,4-13,7m3/h

Condition: good (used), Year of construction: 2006, Refrigerant: R410A Cooling capacity / dimensioning: 204 KW at 18/12 ° C 29 m3 / h can be cooled by 6 K. ATW 64-4I-2 cooler for closed circuit company EVAPVO Cgjleumlnksrcrdyjt Technical specifications: Fans 7.5 kW; 16.7 m3/sec. Spray water pump: 1.5 kW; 21.4 L/sec. Coil volume: 697L Amount of water required: 833 L Cooling capacity: 180 KW to 465 KW

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of cooling: water, overall weight: 2,360 kg, The information of the chiller (there are two pieces available): - Bitzer screw compressor CSH 8581-125Y - Water-cooled condenser - Switch cabinet, mounted and wired Colrcrsvdlimjdyegt - The systems were switched off from a running operation and professionally dismantled - Last maintenance May 2020 The cooling capacity per system is 270kW (evaporation 2 Celsius, condensation 40 Celsius, refrigerant R 134a). For further data, please refer to the type plate

Condition: good (used), Year of construction: 2021, heating capacity: 0.7 kW (0.95 HP), RFC12 700W water chiller Celrcrdovan Nzsyogt 6 units available

Condition: ready for operation (used), Year of construction: 2005, Air cooler with built-in 3 way valve Carel PCO2 control 2 air outlets on top Dimensions: 170 x 85 x 200 cm (LxDxH) Celreg N Hu Decrdyjgt

Condition: new, Year of construction: 2024, Chillers from 5 - 600KW with the natural refrigerant propane R290. We can offer different versions and equipment. From system delivery to turnkey installation. Make a non-binding enquiry or arrange an appointment with our experts who can check and work out the feasibility on site. Cgslrji Ab Hcocrdyst

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) Cslrcrdeg Ezarsyjgt All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2010, Water chiller Celrcrdsrc E Tmsyegt - Manufacturer: 7AIR - Type: SKG - 7,1 SPEZ - Coolant: R 134a

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, FLSK-3S/3.0/W/H2-4B0/0/4236913 General information The FLKS-3S is a compact liquid-air liquid-air cooling system with a plastic plastic tank housing and integrated air duct. This lightweight and robust design makes it suitable for a wide range of applications. Function The pump conveys the operating medium Cgslrotylulecrdyet from the tank via the component to be cooled component to be cooled to the heat exchanger. The axial fan provides the necessary necessary air flow through the heat exchanger to cool the operating medium cool down again. Area of application l Liquid-cooled drives: Motor spindle, torque motors, servo motors, linear motors l Inverter cooling l Gearbox cooling and lubrication l Bearing cooling l Tool cooling

Condition: good (used), Year of construction: 2021, cooling capacity: 7 kW (9.52 HP), type of input current: three-phase, volume flow: 50 m³/h, thermoregulator glycorated water see detail in photo Cgelrevan I Rscrdyot

Year of construction: 2004, Condition: used, Bite here 4 pieces of fans with mounting plate and bracket. These were installed in an EC 200HP from York. Cgslrsk Dz Enscrdyjt Price is per fan.

Condition: new, Year of construction: 2022, We configure almost all refrigeration systems for them with also with alternative refrigerants . R290 / R32 / R 454B... / etc. in all performance classes . Advise you from the quotation phase to the turnkey implementation. Call us or arrange a free on-site appointment, Germany-wide. Cgelrsfqllwecrdyjt All machines are built in series production with high quality directly in the factory according to specification . We offer full consultation / commissioning / refrigeration network, piping / service / maintenance repair Germany-wide . The cold water professionals IKG Industriekälte

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C Cjlrog Ewwrecrdyegt (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW3000 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical data Cgolrcji D D Rvordyst Voltage 230 V Power consumption 0,45 A Cooling efficiency 50 W Container capacity 9 L Connections (inlet/outlet) 10 mm Maximum working height 10 m Maximum flow 10 L/min Weight 9,5 kg Dimensions 49 x 27 x 38 cm Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, cooling capacity: 236 kW (320.87 HP), type of cooling: air, overall weight: 2,011 kg, total width: 2,400 mm, total length: 3,600 mm, total height: 2,100 mm, warranty duration: 6 months, Aircooled chiller LENNOX NAC 230D NM5M 236kW Cooling capacity: 236 kW / 67.1 tons (12/7 — 35°C) Year of manufacture: 2017 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP182KCE-TFD-455 (scroll) + 2 pcs. ZP385KCE-TWD-524 (scroll) Type of refrigerant: R410-А Number of fans: 4 pcs. Dimensions: 3.6x2.4x2.1 m. Weight: 2011 kg. Working hours: 1/1242/1/1234 h. Condition: Excellent Cgslrovn R N Tjcrdyjt

Condition: excellent (used), Year of construction: 2013, cooling capacity: 150 kW (203.94 HP), type of cooling: water, Absorber Carrier 16LJ-02, hot water 90-70°C, 151KW cooling capacity, Cgslrcrdjr Hdthjyst

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled water chillers for industrial use for indoor and outdoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminium fins and self-cleaning coaxial evaporator for maximum reliability. Cooling capacity 13,5 Kw Cjlrcrefmd E Sedyjgt We have many chillers directly from stock available used and new . contact us for a non-binding offer.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of cooling: water, overall weight: 729 kg, total width: 930 mm, total length: 2,430 mm, total height: 1,070 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Cjlrcrdjvn N Hweyegt Working hours: 11437 / 4712 h. Condition: Excellen

Year of construction: 2009, Condition: used, Chiller, Turbo, Carrier 19XR5655LG467,high effizient, Cjlrsbqy Nbocrdyjgt

Year of construction: 2022, Condition: as good as new (ex-display), 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Technical data on request . The machine is available from stock in Güglingen. We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . In addition, we partly take refrigeration systems in payment or buy them. Cgolrcofqlllerdyot

Condition: good (used), Year of construction: 2010, Functionality: fully functional, cooling capacity: 79 kW (107.41 HP), type of cooling: air, overall weight: 960 kg, total width: 1,300 mm, total length: 2,900 mm, total height: 2,100 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM 030 79 kW Cslrcrdovn Nv Esyogt Cooling capacity: 79 kw - 22.4 ton (12/7 — 35°C) Year of manufacture: 2010 Heat exchanger: Plate Refrigerant circuit: 1 pcs. Type of refrigerant: R410A Compressors: 2 pcs. TRANE (scroll) Number of fans: 3 pcs. Dimensions: 2.9 x 1.3 x 2.1 m Weight: 960 kg Condition: Exelent

Year of construction: 2009, Condition: new, Carrier chiller 19XR7070LF475 ,YEAR 2009, 290h run hours , Cgelrcrdeb Tulwsyjt 3100KW/1000ton cooling capacity, turbo compressor, Siemens Softstarter, R134a, high Efficient , 400V 50Hz, commissioning and service available.

Year of construction: 2023, Condition: as good as new (ex-display), newly arrived air cooled chiller, 3,6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suitable for smaller chilled water supply of process applications. Compact design, simple control. Celsfy Rycjrcrdyogt

Condition: new, Year of construction: 2022, Functionality: fully functional, cooling capacity: 13.8 kW (18.76 HP), type of cooling: air, overall weight: 193 kg, total width: 400 mm, total length: 1,400 mm, total height: 1,400 mm, warranty duration: 6 months, heating capacity: 16.2 kW (22.03 HP), AIRCOOLED chiller/heat pump Clivet WSAN-YMi 81 13.8/16.2 kW Cooling capacity: 13.8 kW (12/7 — 35°C) Heating capacity: 16.2 kW (40/45 —7°C) Year of manufacture: 2022 Version: 250 V, 1 Phase, 50 Hz Options: Heat pump, Hydralic module Hydraulic module: 1 pcs. water pump, expansion vessel Heat exchanger: Plate Celrcovn Igisrdyjgt Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (Rotary Inverter DC) Type of refrigerant: R-32 Number of fans: 2 pcs. Dimensions: 1.4 x 0.4 x 1.4 m Weight: 193 kg Working hours: 0 h. Condition: excellent, new