Used Beverage production for sale (935)

Condition: used, operating hours: 24,000 h, Used Bottling Line for Sale Bertolaso 7000 BPH – 1999 for still and sparkling wine. The bottling Line for Sale as a whole, considering every component, is very well maintained. Clean and without obvious or compromising signs of wear. The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0.75 formats. Feb Hsvguu Djdm Ruepg Depalletizer: The line starts with the Acmi automatic depalletizer model Rasar P130; with an electric roller pallet storage that manages the pallets automatically with two pallets waiting. The maximum height of the workable pallet can reach about 2 meters. The standard pallet size is 800 × 1200 with a height of 140 cm. Automatic inter-layer remover with compressed air rotating arm. It has a parachute safety system that prevents the head from going down in case there is an operator. It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened. Filling Isobaric Monoblock of Bertolaso Bottling Line for Sale: The Bertolaso ​​Sincronia 1400 filling monoblock starts with a 28-valve internal bottle rinsing machine followed by an isobaric filler with 36 taps and ends with a 6-head mushroom cork corker, or a 4-head screw cap. It has a machine pitch of about 30 cm to allow the processing of multiple formats of different sizes. The direction is clockwise. Safeguards are all present as also machine manuals. This line’s bottled product is wine and sparkling wine in sizes from 0.375 to 1.5 L.  It performs isobaric filling with mobile nozzles and traditional valves. It generates a vacuum before capping. The type of cap used is cork (straight or mushroom) or silicone with 6 heads; while aluminium and Stelvin caps with 4 heads. The size of the corker ranges from a minimum of 44 × 23.5 to 48 × 30.5 mm. Inspector: It is a 2011 model that is able to check the level and the cap, the internal product and any residues inside the empty bottle. Fully electronic with laser sensors, it can work at a speed of 7000 BPH and over. Washer-dryer: It’s a Cames from 2000 with a spray washing system that rinses the bottle externally, brushes it and then passes it under the hot air hair dryers that immediately dry the bottle preparing the surface for labelling.  Wirehooder and Capsule: Next in line is a Spumante Wirehooder of the brand Nortan Minerva 60, an accumulation space for the bottles followed by a Nortan capper. It is also suitable for sparkling wines with centring, with a maximum height of the processed bottle ranging from 15 to 35 cm. Overall mass 3000 kg; Consumption: 380 v, 15 kW, 50 Hz Labelling machine: Bertolaso Bottling Line for Sale has a Krones labeller from the year 2000 with a bottle lock at the entrance. It has 8 plates with a machine pitch of about 30 cm. It has a manual head and glue film adjustment, mechanical centring system and outgoing label smoothing.

Condition: used, Year of construction: 1996, Used Case packing Monoblock brand Oma YOM 1996  – 2005 bph Monoblock Oma Brand components: Case erector with single-head packer It can make a case of 6 or a case of 12 bottles. Safeguards. Painted iron frame. Fpobsvguuqj Hdm Rujg There are various formats. Manufacturing year of the case packing triblock 1996. Production is about 450 cases per hour of 6 bottles. There is no taping machine at the output of the case packing tri-block to seal the upper and, lower part of the case. Thus, motors must be used on case exit belts. The case can then go to the taping machine to be closed from the bottom and top. The taping machine must have a flap system; that foresees the pre-folding of the upper flaps to carry out a correct closure of the case. On request, we can create a correct layout customized to the needs of the buyer.

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Fpeb Hjvguuksdm Ruog Isobaric valve: No PLC type: Not Existing Spare parts available: No   Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Year of construction: 2011, Used Alfatek Elvira Filling Monoblock 9-9-1 aluminium screw cap 2011 Fpjb Hjvgut Tsdm Rusg This monoblock can work formats of 250 ml and 1 litre. It works with both rectangular and cylindrical bottles. It has a vacuum pump and some spare parts. The minimum height of the processed bottle is 23 cm while the maximum height is 32 cm. Also included are wiring diagram manuals. The machinery can be used for both liqueurs, oil and still wine. Its state of maintenance is excellent, it has seen very little use by its previous owner. Includes vacuum pump element. Shipping can start after about 20 working days from the first payment.

Condition: used, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Fjb Hsvgutyjdm Ruopg Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. Fpsb Hdevguttem Ruog The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Fpob Hsvgutaedm Ruog Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.

Condition: used, Used Complete Filling Line Ada 2000 FILLING LINE FOR CARBONATED AND NON-CARBONATED DRINKS Manufacturer: Specijalka – Ada – Serbia – 2000 Capacity: 1.200 bph x 2 L PET Equipment specification: -FILLER 24 valves -CAPPER 1 head -LABELING – paper cut labels, cold glue Fsbsvgur Ns Hdm Ruopg -SHRINK WRAPPER – semi-automatic, manual stacking of bottles -SATURATOR -4 sugar bowls -6 CO2 bottles -Air dryer The equipment is in perfect condition, turned off in 2019. At the overhaul in 2018, all bearings were replaced.

Condition: used, Year of construction: 2007, Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down Fpeb Hdm Rovgur Asueg – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Condition: used, Year of construction: 2009, Used Acmi Case Erector 2009 Case Erector manufactured by ACMI in 2009 complete with safeguards and user manuals. It reaches speeds of 8000 BPH. Fpob Hdevgurvjm Ruog Currently not operational, mothballed. Machinery has been kept in excellent condition and is ready for immediate sale.

Condition: used, Year of construction: 2009, Used Acmi Case Packer 2009 Fjb Hovgurpedm Ruspg Used Case Packing machine, manufactured by ACMI in 2009 complete with safeguards and user manuals. It reaches speeds of up to 8000 bottles an hour. Currently kept in storage. Machinery kept in excellent condition and ready for sale.

Condition: used, Year of construction: 2003, operating hours: 5,000 h, Used Kosme Labeling Machine Extra Hot Melt 8T S1 E1 2003 Fjb Hdevguriem Ruepg Dimensions: 2.5m x 1.5m Power supply is 400V. Power capacity is 11kW. Air consumption is 60l/min. Nominal pressure 5-6bar. Has run 1.5L, 0.5L, and 0.33L PET Bottles, and includes all the relevant parts such as the base plates etc. for these sizes. The label size of the 1.5L Bottle was 82mm x 278mm. The label size of the 0.33L Bottle was 40mm x 203mm Output capacity: 6,000 bph Working hours: approximately 5,000 hrs.

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Fpob Hdjvgurcsm Rujg Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: used, Year of construction: 1990, Used Filling Monoblock Cortellazzi 1990 This filling monoblock was built by Cortellazzi in 1990. The model is IPD 24/6 The direction of rotation of this machine is clockwise. The filler has 24 valves and the type of filling it carries out is volumetric. Regarding the type of nozzle it is fixed. Fsb Hovguq Ssdm Ruepg The capper, a fundamental part of this filling monoblock, has 6 heads and works with crown caps. This machine, used for bottling, has always been kept in excellent condition and is immediately available for sale. Packed and ready to be loaded.

Condition: used, Year of construction: 2001, Used Capsuling Machine Vulcan 2001 Manufacturer: Robino & Galandrino Model: Vulcan 3000 L Year: 2001 Speed (b / h): 3000 Formats processed: 3 Safeguards: Yes Manuals available: Yes Revisions available: No Operating state: Running Processed product: PVC capsules of different sizes (diam. 31/34) No. of heads: 1 Capsule type: PVC Feb Hdm Rjvguqrsuspg Capsule magazine: Standard Spare parts available: No

Condition: used, Year of construction: 2012, Used Wirehooder Robino and Galandrino 8 T 2012 8 heads Robino and Galandrino wire hooding machine. Head height variable. Long autonomy loading of wires. Fpsbjvguqlo Hdm Rujg Anticlockwise rotation. Equipment for 2 bottle formats. The machine was in use until 2021. Year of construction 2012. This used wire hooder Robino is in excellent condition and ready for sale.

Condition: used, Year of construction: 2001, Used Blow Molding Machine Sipa 8/4 3500 BPH This blow molding machine was manufactured in 2001 by SIPA and is the 8/4 linear type with 4 cavities. It reaches a speed of 3500 BPH and has two neck types including corvaglia and 29/21 neck. Fsb Hdovguqfem Ruepg The machine has all its user manuals and its safeguards. It is in operation for one shift for only 6 months per year. It is currently in production, and was regularly maintained. Its bottles sizes are 1.5 L and 1 L for oil. Has pressure oil neck equipment. Has a total of 5 molds. Neither the compressor nor the chiller is included. This linear blow molding machine is kept in working condition and is ready for sale.

Condition: used, Year of construction: 2004, Used Siad Compressor Tempo Tehnika 350 2004 Fpsb Hdmsvgup Us Rueg Compressor: Tempo Tehnika 350, 2004, – Serbia 1100 rpm, 75 kW, 42 bar Air dryer: Bode du 37 types 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA RWD 150 – 2004  

Condition: used, Year of construction: 2009, Used Case Erector Bondani 2009 The Used Case Erector Bondani 2009 is a machine manufactured by Bondani. The model number is P CV – 900, and it was produced in 2009. Currently, the machine is in storage. It has various safety features in place to ensure the safety of operators and those working in the vicinity. Fpeb Hdm Rovgupzousg The machine comes with manuals to provide guidance on proper use and maintenance. The Used Case Erector Bondani 2009 is a reliable and efficient tool that is well-suited for a variety projects.

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 Fpjb Hdm Rjvgupueuog The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti. Its model number is Form 1200 HM and it was made in 1994. Currently, it is in storage. The machine has safety features and comes with manuals.

Condition: used, Year of construction: 1998, Used Filling Monoblock Cerma 1998 Fjb Hdovgupnom Ruopg The Cerma 46-MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998. It is currently in storage, but is ready to be put back into action at any time. This monoblock is specifically designed for filling glass and PET containers with vinegar, and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results. The monoblock is equipped with 23 valves, which help to ensure that the filling process is fast and efficient. It also has 4 capping heads for aluminum screw caps, which helps to seal the containers securely and prevent any spills or leaks. The rotation direction of the monoblock is counterclockwise. This helps to ensure smooth and seamless operation. In terms of safety, the Cerma 46-MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the product. Manuals are also available for reference, so users can easily understand how to operate the equipment and perform any necessary maintenance. Overall, the Cerma 46-MB filling monoblock is a high-quality and reliable piece of equipment that is perfect for any business looking to fill large quantities of vinegar into containers. With its efficient filling and capping capabilities, it is sure to be a valuable asset to any production line. It weighs a total of 4200 kg, so it is a sturdy and durable piece of equipment that is built to last.

Condition: used, Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Fpeb Hdmsvgupho Ruog Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL Bordeaux. To sanitize the used line, they use disposable steam which still allows the taps \ central part to be washed well. Used wine filling line services: For this Complete Bottling Line used for the wine we can offer disassembly and packaging services, and reassembly in case of need. Furthermore, we can propose a new project for adding bottle format equipment in case of a new bottle shape. A maintenance service can be negotiated for this Complete Bottling Line and implemented in about 75 working days from the confirmation of the order. All replaced parts are warranted except Filters, fuses, lubricants and consumables in general; they are subject to ordinary or scheduled maintenance. The electrical components can be damaged by accidental electric shocks to the control panel and by the interruption of the general control. Damage due to the use of non-original parts. Used Complete Bottling Line for wine subject to prior sale.  

Condition: used, Year of construction: 2016, Used Ispector Logico 2016 Manufacturer: LOGICO Model: CPWE Year: 2016 Speed (b/h): n/a Processed formats: 0.2 – 30 kg Accident prevention protections: Yes Fpjb Hevgun Rsdm Rusg Manuals available: No Revisions available: No Operating state: Disassembled Processed product: Boxes Container type: n/a Type of inspection: Weight control PLC typology: N/A Spare parts available: No Hours worked: n/a

Condition: used, Year of construction: 1992, Used Blow Molding Machine Sidel 1992 Manufacturer: SIDEL Model: SBO2 Year: 1992 Speed (b / h): 3000 Processed formats: 0.25ml – 2 liter Accident prevention protections: Yes Manuals available: Yes Revisions available: Yes Operating status: In production Number of cavities: 2 Preform neck type: Preform 1881 weight: 9000kg Quick format change: Yes Preform loader: Yes Preform orientator: Yes Compressor: No Chiller: No Air recovery system: No PLC type: Mitsubishi Spare parts available: Yes Hours worked: 2000 Fjb Hevgunwsdm Ruopg Consumption: Volt:360 Kw:40 Hz:100 Notes: Machine working stabile suitable to be connect with filler machine. The machine has been completely updated, hmi electronics and new plc.

Condition: used, Year of construction: 2000, Used Case Packer Ape year 2000 Builder: Ape Model: 1200 Year: 2000 Speed: 3600 bph Formats: 2×6, 1×12, from 0.375 to 0.750 Fpob Hsvgunqedm Ruog American cartoon Left to right direction, reversible Used until 2020