Used Beverage production for sale (923)

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Cebjm U R Dhs E Ihf Tjrb

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Crsben S A R Se E Ihf Tjb

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Crob E Ihfeqqz T He Tsb

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Csb Ejvmyuie Ihf Tsrb

Condition: used, Year of construction: 2011, Overview This blow moulder was built in 2011 by French manufacturer SIDEL. The machine has been regularly serviced by SIDEL and is in a very good condition. The Sidel SBO 20 Universal Eco2 is still installed but not in production anymore.   Technical Details  Nominal capacity: 40,000 bph   Current capacity: 38,000 bph with different formats   Neck: 38 mm   20 standard quick change moulds (moulds are not included)   19,900 working hours  Scope of Delivery  Blow Moulder Sidel SBO20   Oven Sidel Universal Eco2   Preforms tipper Sidel EBHS 2050  Sidel hopper with cover  Preforms elevator and unscrambler  Preforms alimentation infeed rail   Pressco control preforms ovalisation   Sidel “banana” preforms controller,   Vulcanic water thermoregulator  Sidel PCC blower & Pressco PCC drive         Sidel electrical cabinet with A/C  Cjb E Ihot Elb Isf Torb

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Csb Esl Hxpne Ihf Terb

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Cob E Ihsl Hx Ecjf Torb

Condition: used, Year of construction: 2007, Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the sealing tightness of the caps Manufacturer: WILCO R18 BS/V Model: Wilcomat Year of manufacture: 2009 Continuous sterilizer Sterilization by thermal treatment  Manufacturer: ACB Hydrolock Model: ACB S-350 Year of manufacture: 2014 Preheater/Cooler Heating or cooling of bottles by means of water cascades (4 heat exchangers to heat or cool the water)  Manufacturer: EZMA Model: - Year of manufacture: 2017  Capper Capping of bottles (with transport lift for caps)    Manufacturer: GYM Model: RA-6C Year of manufacture: 1994                    Labeler Hot gluing of pre-cut labels on the bottle Manufacturer: KRONES Model: Canmatic Year of construction: 1999 Shrink packer Grouping and shrinking of foil to protect the bottles  Manufacturer: OCME Model: VEGA S 50V Year of manufacture: 2001  Palletizer Grouping and stacking of bottles on pallet  Manufacturer: STORK  Model: SPE - 200 Year of manufacture: 2001 Pallet winder Wrapping of the pallet with foil  Manufacturer: OCTOPUS Model: 1600 BF Year of manufacture: 2001 Crsb E Ihfsl Hx Hlj Teb

Condition: used, Year of construction: 2014, Overview The water softener is a double unit with 2x3 bottles. The plant was manufactured in 2014 by the German manufacturer Grünbeck and is free because the owner invests in a new, larger plant. The plant is still in operation and can be inspected. Technical details Capacity: 2x 8 m3/h Softening from approx. 15°dH to approx. 3°dH with flow admixture Last maintenance: 21.3.2022 Incl. 2x salt tank à 210 l Cob Ejl Hx Ras Ihf Tjrb

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Ceb E Ihjl Hx Rpjf Tsrb

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Cjbeu Scr So E Ihf Terb

Condition: used, Year of construction: 2005, Overview Industrial Lamination Line for hard biscuits and crackers An integrated solution of the whole process from the beginning to the end. The line was manufactured in 2005. The line manufacturer LASER s.r.l. located in Italy. Flexible process line equipped with various accessories to allow producing many products. The versatile line consists of: •      Dough handling system to fill a three roll sheeter •      Lamination unit •      Four gauging stations •      Relaxation conveyor •      Air blowing unit •      Two cutting units (engraving and cutting by a rotary cutting machine) •      Wash-over unit •      Lye bath (including heating) •      Three topping applicators (for salt or various seeds) •      Tunnel oven (hybrid: DGF and cyclothermic zone) •      Oil Sprinkler Machine •      Manuals (operators and electric schemes) in English   The line working width 0.8m, the oven baking length is 25m. The line is still running in production. The line capacity is approx. 300kg per hour of finished products The tunnel oven is heated by natural gas burners. The periodical maintenance of the entire line is carried out accord to the regulations. Scope of delivery Full line | LASER | line | 2005 Crob E Ievbh A Rjhf Tjb

Condition: used, Year of construction: 2019, Overview    This cold glue labeler was manufactured in 2019 by the German manufacturer Gernep and used in a Belgian brewery. The machine was regularly maintained by OEM. The labeler was dismantled in summer 2024  Technical details  Capacity: 6,000 bottles/h    Formats: 330 ml, Neck (over the mechanical closure) and front label  Working direction: counter clockwise, r-l  Crsb E Ihfjuhthms Tob

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Crsb E Ihstuyq Aof Tob

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Creb E Ihel Hxl Ijf Teb

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Crsb E Iel Hxniehf Teb

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Cob E Ihovpd S Rjf Torb

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz Cob E Ihfevpi Abs Tsrb

Condition: used, Year of construction: 2006, Overview This 20-foot refrigerated container was manufactured in 2006 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container was last serviced in November 2024 and works perfectly. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 2006 Maximum load capacity: 30000 kg Cooling range: -30°C to +30°C  Coolant: R 134a  Power connection: 32 A heavy current Last maintenance of the cooling system: 29/08/2024 Easy cleaning  Accessories such as alarm, polar curtains, locks, alu ramp included Cjbjvf E Sds E Ihf Tjrb

Condition: used, Year of construction: 2016, Overview  The MICROMAT M 1/1-F KeyKeg filling machine is a fully equipped solution designed to streamline and automate the filling process for 50-60 KeyKegs per hour. This machine comes with everything necessary for high-efficiency operations, including a complete CIP (Cleaning in Place) system, ensuring that the cleaning process is integrated and automated, maintaining optimal hygiene without the need for disassembly. Technical Data  Capacity: 50-60 KeyKegs per hour Dimensions:Depth: 1,300 mm Width: 800 mm Height: 2,200 mm ± 50 Working station height: 600 mm ± 50 Connections:Product: DN 25 Media: DN 25 Control air: Socket ¾" Electrical connections:Voltage: 230/400 V, 50 Hz / 480 V, 60 Hz Connection power: 1 kW (without tank pumps) Noise level: Below 85 dB A Key Features  Fully integrated CIP system: This allows for internal cleaning of the filling head and pipelines without manual intervention, ensuring hygiene and reducing downtime. Control system: Siemens S7 with a user-friendly interface. Robust construction: Stainless steel base frame and critical components. This machine is ready to use, offering all the equipment needed for fast and efficient KEG filling operations​ Csb Esu Hbk Ae Ihf Tsrb

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Cjb Eju N Snke Ihf Tsrb

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Crjb E Ieu Rindshf Teb

Condition: used, Year of construction: 2020, Overview This automatic fishfilet-skinner, type: Varlet 1258 was built in 2020 in France. The Varlet skinner has been designed for fully automatic skinning of fish fillets (f.e. Thick skin fillet , Fresh salmon , Smoked salmon , Fresh trout , Smoked trout). The V1258 is an easy to use, industrial, single track automatic skinning machine. It is placed on a support on wheels and proposed with an outfeed belt. Specially designed for firm-fleshed fish such as trout or salmon, the V1258 can skin both fresh (water) and smoked (air) fillets. The V1258 is equipped with a notch thickness adjustment system. Its small footprint is achieved by replacing the outfeed belt with a tilting slide that can be removed without tools, to receive the products in boxes. Finally, this automatic machine improves the safety of the user. Technical Details Cutting width: 320mm Height: 1300mm Width: 800mm Length:  1200mm Weight: 140kg  Power: 1,2Kw Scope of delivery Automatic for fish filets | VARLET | 1258 | 2020 Cjb Eou U Hrxe Ihf Terb

Condition: used, Year of construction: 2019, Overview  This canning machine “100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)   Cjb E Ior A S E Ashf Terb

Condition: used, Year of construction: 2010, Overview  This SOGECAL steam boiler, model M8KK, was manufactured in 2010 and is available for sale due to the company's relocation, where it is no longer required. It has been used exclusively for beer production, runs on diesel fuel and is available immediately. Technical Data  Model: M8KK Year of Manufacture: 2010 Fuel Type: Diesel Service Pressure: 8 Kg/cm² Test Pressure: 17 Kg/cm² Design Pressure: 11 Kg/cm² Steam Production: 450 Kg/h Thermal Power: 2700 Kcal/x100 Heating Surface: 8.8 m² Operating Temperature: 174 °C Volume of Water/Oil: 0.65 m³ Crsb E Ihsuqrd Tof Tjb