Used Ksb Pump for sale (122)

Condition: excellent (used), For sale: a linear pump from the renowned German company KSB, model ETALINE ETL, complete with a Siemens motor. This unit is designed for use in industrial installations, heating and cooling systems, and water circulation systems. PUMP TECHNICAL DATA Dedpfx Adsz Slydogokw Manufacturer: KSB Model: ETALINE ETL Flow rate (Q): 40 m³/h Head (H): 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flanged connections MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Slight signs of storage are visible Technically sound APPLICATION Industrial installations HVAC systems Water and liquid circulation Production plants Explosion-proof zones

Condition: used, KSB Etaline GN G11 Inline Pump, Centrifugal Pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. - Areas of application: - Heating systems - Air conditioning systems - Domestic water systems - Water supply - Industrial circulation systems Fluid conveyed: Liquids that do not chemically or mechanically attack the pump materials. Operating data: Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at zero flow rate must not exceed the specified value. Design: Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12 756 Dkodpfxsiu U Txe Adgow Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/pressure nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G11 pump

Condition: used, KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency inverter for stepless speed adjustment. - Areas of application: - Heating systems - Air conditioning systems - Domestic water systems - Water supply - Industrial circulation systems Fluid to be conveyed: Liquids that do not chemically or mechanically attack the pump materials. Operating data: Q 17.50 m3/h H 5.8 m You can find the other data for this pump in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the specified value. Design: Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Dksdpfx Ajd Sqkzjdgow Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/discharge nozzle: 160 You can find more technical data in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit. Dede Aibq Nopfx Adgjkw

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system. Dodpfez Slrtox Adgskw

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Dkjdpfx Aey H Nbkjdgow Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: used, Centrifugal Pump, Pump, KSB Etabloc-GN 50-200/1852, Used machine Manufacturer: KSB Type: KSB Etabloc-GN 50-200/1852 Year: 2003 Overall dimensions: Width: 810 mm Depth: 350 mm Height: 400 mm Weight: 130 kg Electrical data: 400 V; 18.5 kW; 32.5 A Dkjdey Nnnbspfx Adgjw Flow rate: 72 m³/h Head: 51 meters

Condition: ready for operation (used), Pump; KSB ETABLOC GNF 050-315 Centrifugal Pump, Used machine Manufacturer: KSB ETABLOC Type: GNF 050-315 Overall dimensions: Width: 510 mm Depth: 420 mm Height: 700 mm Weight: 55 kg Electrical data: 400 V; 1450 rpm Flow rate: 30 m³/h Head: 26 m Year of manufacture: 2010 Dkjdpfx Adsyh D H Tjgow

Condition: excellent (used), KSB ETB050032200 Volute casing pump Etabloc single stage volute casing pump in closed coupled design, with KSB pump drive and frequency inverter, brand new in box, with manuals, see plates for full spec Dkedpex Ai N Rofx Adgjw

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 Dkjdpfx Adsxbhtregjw IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: Dedpfexbhtlex Adgokw KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Dsdpfjxp Eqksx Adgskw Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Dkjdpfoibwarjx Adgew Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Condition: good (used), functionality: fully functional, Two KSB ETANORM SYT horizontal single stage centrifugal pumps, model ETNY 080-065-160 SG DB25LD20125. Mounted on metal base frames and driven by three phase electric motors with guarded couplings. Indicated nominal data: flow rate of 105 cubic metres per hour, total head of 28 m, operating speed of 2,958 rpm and diameter of 160 mm. One unit was manufactured in 2018 and the other in 2020. ATEX II 2G execution. Each pump incorporates an EagleBurgmann TS1016/A007-00 double mechanical seal manufactured in 2020, with an 8 litre jacket volume, 0.2 litre tube volume, maximum allowable pressure of 16 bar, test pressure of 28 bar and temperature range from minus 60 to plus 200 degrees Celsius. The system includes instrumentation, auxiliary piping, reservoirs, R. STAHL explosion proof local electrical control panels and a support structure. Dkjdpfx Adjz R Azuegow

Year of construction: 1992, condition: used, Modell: KSB KRSF-BLOC 50-200, used Typ: KRSF BLOC 50-200 Centrifugal pump Manufacturer Year: 1992 P-Nr.: 5-L40-757 504/2 Q: 9,70 l/s H: 12m n: 1450 1/min Dkedoiztvaspfx Adgjw

Condition: ready for operation (used), Year of construction: 2004, Centrifugal pump, pump, KSB Etanorm mx 125-250 NA, Used machine Dodouhl R Hjpfx Adgekw Overall dimensions :1690 x 780 x 1000 mm Weight: 1000 kg Manufacturer:KSB Type:Etanorm mx 125-250 NA Year of manufacture: 2004 Electrical data: 400 V; 50 HZ; 2980 rpm; 110 kw; 190 A Lifting height: 75,5 m Pump capacity: 5920 L/min

Year of construction: 1992, condition: used, Modell: KSB KRSF-BLOC 50-200, used Typ: KRSF BLOC 50-200 Centrifugal pump Manufacturer Year: 1992 Djdpfjiztv Nsx Adgokw P-Nr.: 5-L40-757 504/3 Q: 9,70 l/s H: 12m n: 1450 1/min

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Dksdpfx Asfyn Rpjdgjw Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: used, functionality: fully functional, KSB ETABLOC ETB 80-200 INDUSTRIAL PUMP – 22 kW – 80 m³/h – 58 m Original KSB ETABLOC ETB 80-200 industrial pump with a 22 kW electric motor. This is a high-performance centrifugal pump designed for industrial installations, circulation systems, cooling applications, and the transport of process water. Complete pump unit from the German manufacturer KSB, equipped with an energy-efficient, three-phase IE3 motor. TECHNICAL SPECIFICATIONS OF THE KSB PUMP Dedpfs Aibf Eox Adgokw • Manufacturer: KSB – Germany • Series: ETABLOC / ETB • Type: ETB 80-200 • Type: centrifugal pump • Flow rate (Q): 80 m³/h (80,000 l/h) • Head (H): 58 m • Motor power: 22 kW / 22,000 W • Pump speed: 2954 rpm • Impeller diameter: 203 mm • Motor power supply: 400/690 V, 50 Hz • Motor efficiency class: IE3 • Protection class: IP55 • Insulation class: F • Motor year of manufacture: 2017 • Serial number: 1787

Condition: used, Art. No.: Pum 31 Manufacturer: KSB Type: ETANORM MX 100-200 MX 10 Item condition: very good, used Pump comes from a fire extinguishing system and has only been used for test runs. Available: immediately Flow rate: 5,000 liters/min Head: 49.6 m (water column) Revolutions: 2940 rpm Pump impeller: bronze Dsdezxgwkspfx Adgjkw Diesel engine Manufacturer: John Deere Type: 4045DF159 Power: 55 kW Revolutions: 2,940 rpm Year of manufacture: 2012 Operating hours: 37 Tank: 150 liters Control cabinet for automatic operation. The system can also be converted to an irrigation system with 12 bar pressure upon request.

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. Djdpfxez Slz Ij Adgokw TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: good (used), Year of construction: 2007, 2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 - second-hand - : Price per unit ex location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of construction: 2007 Q400.00m3/h H 14.00m n 1460 1/min Condition: good Available: immediately Dedpfx Adjuntlmjgekw Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2018, functionality: fully functional, KSB Etaline ETL 032-032-160 | New In-line Pump no. 6 Manufacturer: KSB SE & Co. KGaA Model: ETL 032-032-160 GGSAV66D200222 (ETALINE) Dkodpfsy I Dn Isx Adgjw Capacity (Q): 17.00 m³/h Head (H): 18.00 m Rotational speed (n): 2921 rpm Impeller diameter: Ø 132 mm Year of manufacture: 2018 Viscosity (v): 5.5 mm²/s MEI index: ≥ 0.70 Material number: 01216137 The KSB Etaline is a high-efficiency centrifugal pump with an in-line design (suction and discharge nozzles are aligned on the same axis), allowing for direct installation on the pipeline. This model features a very high energy efficiency index (MEI ≥ 0.70), resulting in low operating costs. The pump is intended for use in heating, air-conditioning, and industrial circulation systems. The robust, red-painted casing and precisely matched 132 mm impeller ensure stable performance parameters at a capacity of 17 m³/h.

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. Dksdsz Snu Nspfx Adgsw The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: excellent (used), For sale is a KSB ETABLOC G 32-200/752 centrifugal pump with an electric motor. The pump has been inspected and is in full working order. It is a robust, industrial-grade pump from the renowned manufacturer KSB, designed for applications such as water systems, circulation systems, and industrial uses. Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 Serial number: Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Dkodpfjz Sn S Iox Adgjw Condition: used, inspected, and in full working order. It has normal signs of use and storage, as shown in the pictures. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the pictures.