Van Maele Benelux N.V.

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Fgjdpsy Ulvaofx Adloc Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Fodpfx Asy T R Sqedlegc Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Includes towing brake. Fjdpfsy Tt Hdox Adlsgc

Condition: used, cutting width 330 mm Fedjy Tpqlepfx Adlsgc Cutting height 135 mm Motor output 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts.

Condition: excellent (used), Working height: 8 cm, pneumatic motor: 2 x 0.9 kW Fgjdpfey Tm Hdjx Adloc In very good condition.

Condition: good (used), Code: 0390 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Fedpfx Aoy Tk I Sjdlsgc Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: excellent (used), Motor power: 2.2 kW x 2; Cutting angle: 45° in both directions; Cutting height: 9 cm; Length: 175 cm; Width: 145 cm. Fedpsy S S Ukofx Adlegc

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Fgjdpfoy Sr H Tex Adloc Min./max. working length: 130/2700 mm Cutting height: 125 mm Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW

Condition: used, power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 135 mm, height adjustment type: mechanical, rotational speed (max.): 3,800 rpm, rotational speed (min.): 3,800 rpm, Graule crosscut and mitre saw ZS 135, max. cutting height 135 mm, max. cutting width approx. 430 mm, saw blade D = 350 mm, mitre adjustment +45°/ 0°/-45°, motor 2 kW, extraction port D = 100 mm, as inspected, ex location Seevetal, without transport, subject to prior sale. Fgodpfx Asy Sla Todlsc

Condition: used, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece cut at right angle: 110 x 150 mm (height x width) • Blade guard for operator safety • Extraction port diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (length x width x height) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and test the device on site • The price listed in the auction does not include VAT or transport costs Fsdpfx Asy Rh D Esdljgc Financing and Transport: • We organise transport with the MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. The operator performs the 45° horizontal cut by pulling one blade at a time. Wide cutting capacity (120 mm width x 80 mm height). Fgodoy Iag Tepfx Adljc Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule for long cuts This machine can cut 90° only !!! Fsdpoy Dgdkefx Adlogc Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Suction plant-Ø : 100 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Fgodjyzrgxjpfx Adlsc Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Sprossen blade 12 mm Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Fgodsyza Anepfx Adlsc Sold as seen in current condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Fgodpeyyyfyjfx Adloc Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: reconditioned (used), functionality: fully functional, Power connection: 230V, 1.5kW Current consumption in operation: 5.5A Cutting height approx. 80 mm Cutting length 150 mm Dimensions (W x H x D): 500 x 570 x 750 mm Weight approx. 50 kg Fgodpfsyypfpjx Adlsc Handwheel height adjustment Swivels right/left 45° Tiltable 45°

Condition: good (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Fgjdpfx Ajyyna Eodlec Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Fgedpfx Aoyybyfjdlec Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Fjdeyxxzwspfx Adljgc Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. Fgjdoyxlqrspfx Adlec The machine can be inspected and tested in 56812.

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Fedoyv R Nzspfx Adlogc Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm Fgjdpfeyv Aa Sex Adlsc

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Fsdpfxsyr A Ums Adljgc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Fjdsymqklopfx Adlegc Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach Fgedpfsykvw Sjx Adlsc