Used other machinery for sale (736)

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Kdodpozudfdefx Agrjt Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm Kdsdpfxszvccdj Agrot - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online...

Year of construction: 1992, condition: used, Power: 80 kW (109 HP) Number of cylinders: 6 Dimensions (LxBxH): 750 x 245 x 280 cm Track width: 4 cm Crane: Yes Serial number: 65539 Anchor Drilling Rig Hour meter reading: 11,385H Drill mast: • Type: 200V • Mast length: 6,000 mm Double drill head Drill motor 1 • Type: KH13 Drill motor 2, for hammer rods • Type: KD1011 Equipped with a crane • Brand: Hiab • Type: 020 Engine: • Brand: Deutz • Engine power: 109 kW • Number of cylinders: 6 Track width: 400 mm Overall dimensions: 7,500 x 2,450 x 2,800 mm Remarks: signs of wear Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. Kjdpfez Df Rqsx Agredt The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), functionality: fully functional, Year of construction: 2006, For sale is a Strojstav MPCS 4 dry shotcrete and guniting machine that has never been used and is in like-new condition (Year of manufacture: 2006). This high-performance machine has 0 operating hours and has been stored securely, offering the build quality and performance of a brand-new machine at a highly competitive price. It is designed for transporting and applying dry concrete mixtures and refractory materials. Kdedpfxez Akvrs Agrst Technical Specifications & Features: Condition: Like new / Never used (0 operating hours) Year of Manufacture: 2006 Application Method: Dry shotcrete / guniting (pneumatic dry conveying) Feeding Options: Supports standard bagged materials or large-volume Big-Bags using an auxiliary feeding frame. Mobility & Chassis: Heavy-duty wheels with a front-steered twin-axle system for easy manual positioning on-site. Control System: Integrated, user-friendly control station directly on the machine for safe and precise operation.

Year of construction: 2014, condition: used, Power: 165 kW (225 HP) Number of cylinders: 6 Empty weight: 26.400 kg Dimensions (LxBxH): 900 x 255 x 300 cm Track width: 5 cm Serial number: 2299 Designed for heavy-duty foundation work, anchors, and geotechnical applications Hour meter reading: 2684H Equipped with wireless and wired remote controls Dual drill head Drill motor brand: Eurodrill Drill motor 1 type: RH4300 Year of manufacture: 2014 Drill motor 2, for hammer rods, type: HD5012 Kjdpfx Aez Df R Degrsdt Year of manufacture: 2014 Drilling flushing water: 3’’ water hose External engine RPM display on the front left Rubber-coated tracks Track width: 500 mm Dual automatic lubrication Hydraulic outriggers Engine: Deutz Engine power: 225 kW Number of cylinders: 6 Operating weight: 26,400 kg Includes: 100 unused pipe clamps Overall dimensions: 9,000 x 2,550 x 3,000 mm Remarks: signs of use, Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2000, condition: used, Selecta S2T welding machine. Kdodpfxoz Dqx Hs Agrjt

Year of construction: 2002, condition: used, Serial number: 650755-0202 Capacity 6000-6500 p/h Previously produced 1000 ml Tetra Pak milk cartons Packages capacity 150-1000 ml Weight approximately 9300 kg Hours 26 684 h Equipped with tetra pak screw cap applicator KSM manufacturing, 4005.1.1.31, 2001 Belt length 5 994 mm Kedpjz Ava Aefx Agrsdt LxWxH 6000x2700x3600 Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. If you have any further questions or require more information, please do not hesitate to send us a message or call us. Kjdpjz Dhk Hjfx Agredt

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Kdodpoz Alpmefx Agret Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Showroom / steel structure, Floor height: 3,300 mm. Roof height: 8,450 mm. Width at the bottom: 20,000 mm. Width at the top: 22,150 mm. Doors: yes, various single and double doors. Bridge width: 2,950 mm. Glazing: included, all around. Staircase: diameter 3,300 mm, fully demountable. Facade columns: diameter 250 mm. Staircase columns: diameter 300 mm. Will be disassembled and loaded onto trucks. Kodpfxjz Ayatj Agrsdt

Year of construction: 1988, condition: used, Tschudin cylindrical grinding machine. Kdodpfjz Dpzmex Agrst

Year of construction: 2014, operating hours: 10 h, condition: like new (used), functionality: fully functional, Fiber optic optical inspection system with various endoscopes, as shown in the attached photos. Kdsdsz Dicqopfx Agrst

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Kjdpfxezz Hn Io Agrodt Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Kodpfxjz Ag Uko Agredt Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. If you have any questions or require more information, please send us a message or call us.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,705 mm, travel distance Z-axis: 250 mm, input voltage: 34,000 V, table length: 3,700 mm, table width: 2,050 mm, operating pressure: 4,150 bar, total height: 3,900 mm, total length: 5,700 mm, total width: 2,550 mm, overall weight: 11,000 kg, product height (max.): 250 mm, For sale is a CNC 5-axis hydro abrasive waterjet cutting system, C.M.S. Tecnocut, including: - CNC Z-axis with 250 mm stroke - Automatic chain conveyor - Abrasive feed system - Electrical system and control cabinet - Reel for water and air - Automatic metering of cutting sand with vacuum monitoring - Additional control panel (manual control) - Automatic central lubrication system - Cooling unit for electrical equipment - Osai CNC control - 34 kW high-pressure pump, Greenjet, 4150 bar, 5 ltr./min. - 5-axis: X 0 to -638 mm / Y 0 to -1028 mm / Z 350 to -100 mm, stroke 250 mm Kdodpfx Agjz Atbdsrjt - Programming software TC 2020 - CNC-controlled lathe, R-axis, /min, internal diameter 40 mm / max 200, length 2930 mm / max weight 400 kg - Anti-collision sensor - AWJ anti-reflection plates, spacing 70 mm - Laser for zero point determination - Spray device for cutting head Without warranty, as is, self-removal + shipping Immediately available More pictures to follow -

Year of construction: 2022, condition: used, Serial number: l2100128 Functions: Mixing, grinding, emulsification, vacuum deaeration, direct and indirect heating, cooling. Rotating knives + counter-rotating scraper arm, with specific tank geometry for optimal product processing Technical specifications: Production capacity: 80 to 1,020 liters/hour Capacity: 246 L Temperature: -10/127°C Adjustable rotation speed from 300 rpm to 3,000 rpm Discharge via valve or by electrically tilting the tank 90° With diaphragm circulation pump Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Kdodpozz Iuvsfx Agrot Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider ■ adjustable table for flat brushes Kdodpfx Agszzwxweret Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Ground fault monitoring, adjustable. Kjdpozxwx Eofx Agrsdt

Year of construction: 2015, condition: used, functionality: fully functional, We have a used UFO-4-M/N-2 filter ventilation unit by Klimawent for sale – a stationary dust collector designed for air purification from dust and fumes. Device parameters: a. UFO-4-M/N-2 filter ventilation unit b. 3 hoods, 3000x1500 mm Kdedpfx Agszl Al Dsrst c. Ductwork installation d. Installation capacity: 10800 m3/h Very good condition, fully functional, lightly used. Local pickup only.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. Kjdpfszxcn Esx Agrsdt The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Kdsdpfx Ajzzdulogrjt Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. If you are interested, please include your contact information in your inquiry.

Year of construction: 2016, condition: good (used), functionality: fully functional, For sale: a fully functional hammer mill, brand ROBEX - DPH22KRL, with a belt conveyor. Year of manufacture: 2016. Mill motor power: 22 kW. Kdjdpfxjzwwvho Agret If interested, please provide your contact details in your inquiry.

Year of construction: 1998, condition: used, Serial number: 65170/50671 Capacity 9000 p/h Previously produced 1500 ml Packages capacity 500-1500 ml Weight approximately 8920 kg Hours 33 448 h LxWxH 7300x3100x2800 Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Kedoz Au T Uspfx Agrjdt Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Kdjdjzrmigjpfx Agrot Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, MONTANA DIAMOND Crystal Glide Ski Servicing Robot – in excellent condition and ready for immediate use! Kjdezv Sqdjpfx Agrsdt For sale is a high-performance, fully automatic machine for professional winter sports servicing. This machine is specifically designed for workshops with high service volumes and, thanks to its 2 grinding stones, delivers first-class, fully automatic results. What makes this machine special: it has been meticulously maintained, cared for, and serviced by the owner himself throughout the years. It has been completely overhauled – many important core components, including the motors, have been recently replaced. Ready for immediate use – no backlog of maintenance required. The machine can be put into operation directly in your workshop. The price includes 2 grinding stones, diamonds, and sensors (value of approximately €3,400). Please refer to the attached documentation for detailed technical information and specifications. Viewing is possible until the end of September. Pick-up only / transport must be arranged by the buyer. Sale to businesses, excluding any warranty. For sales to foreign countries: VAT invoice IGL (Intra-Community Supply).