Pmj Industrial

Condition: good (used), Year of construction: 2014, Arburg 420C 1000-290 Tie bar distance: 420x420 mm Screw dia : 35 mm Shot volume: 144 cm3 Hjdpjykpchjfx Afajfc Shot weight: 132 g/ ps

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Hfedpfjyka A Ssx Afaoc Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Total weight: 22,000 kg Equipment Display text German Display text English CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: ready for operation (used), Year of construction: 2003, operating hours: 68,500 h, functionality: fully functional, Clamping force 1750 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 377 ccm Shot weight (PS) 343 gr. Hfodpfx Afjykah Usajc Injection rate 247 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 1 x hydr. core pull - Robot interface according to Euromap 12

Condition: ready for operation (used), Year of construction: 2015, operating hours: 74,114 h, clamping force: 1,600 kN, screw diameter: 45 mm, This 5s Krauss Maffei 160-750 EX was manufactured in 2015. It features a clamping force of 1600 kN and a fully electric drive system, ensuring efficient operation. The machine has a screw diameter of 45 mm and a calculated shot volume of 302 cm³, making it suitable for various injection molding applications. Consider the opportunity to buy this Krauss Maffei 160-750 EX electrical injection moulding machine. Contact us for further details. • Injection unit size: 750 (International size rating) • Drive system: Fully electric (EX series) Hfjdoyi D I Ajpfx Afaoc • Calculated shot volume: 302 cm³ • Max. injection pressure: 2429 bar • Distance between tie bars: 520 x 520 mm • Mold opening stroke: 450 mm • Mold height: min 200 mm, max 600 mm • Ejector stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, injection pressure: 2,470 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest specifications by the manufacturer in 2021! TECHNICAL DETAILS Clamping force: 2,100 kN Screw diameter: 50, 55, 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Maximum screw speed: 278 rpm Screw torque: 1,920 Nm Calculated shot volume: 540, 653, 913 cm³ Specific injection pressure: 2,470, 2,041, 1,461 bar Maximum plasticizing throughput: 42, 52, 62 g/s Nozzle stroke/nozzle force: 400 mm / 100 kN Open injection flow rate: 248, 300, 419 cm³/s Barrel heating capacity: 21.9, 24.2, 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control type: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling switch-on temperature (HLP 32): 35 °C Oil cooling switch-on temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw cylinder temperature: 350 °C Hodsyi Ailjpfx Afaofc Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water inlet temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for core cavity pressure switching circuit 1: 20,000 pC Kistler module for core cavity pressure switching circuit 2: 10,000 pC

Condition: excellent (used), Year of construction: 2001, operating hours: 25,850 h, clamping force: 40 kN, screw diameter: 25 mm, The Negri Bossi 40T in very good condition did low hours was in clean room production Hsdpfx Afoyivplsaefc

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, The Negri Bossi 55T Its in good working condition have faulty screen the owner connected to external screen hours under 28500 . Hedpfx Afsyiviroaofc The machine was in clean room prouduction .

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Hsdpfxsyim E Re Afaofc Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2011, operating hours: 63,580 h, functionality: fully functional, machine/vehicle number: 178804, clamping force: 420 kN, screw diameter: 80 mm, clearance between the columns: 920 mm, injection pressure: 1,755 bar, mold height (min.): 350 mm, ejector stroke: 220 mm, opening stroke: 700 mm, plate length: 1,350 mm, plate width: 1,350 mm, plate height: 1,350 mm, total length: 9,213 mm, total width: 2,539 mm, total height: 2,359 mm, overall weight: 36,000 kg, heating capacity: 29.4 kW (39.97 HP), number of injections: 1, Equipment: documentation/manual, Engel E-Motion 3440-420 Hedpfsyh Ui Eex Afasfc

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Hsdpfx Ajyh Rymefaofc

Condition: excellent (used), Year of construction: 2008, operating hours: 75,851 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Hfodpfoyh Ha Ajx Afajc Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55

Condition: like new (used), Year of construction: 2018, clamping force: 2,300 kN, Equipment: documentation/manual, Toshiba EC230SXII – 230 ton Hjdoyhpi Aspfx Afaefc Injection unit i8 – Screw 50 mm CLAMPING UNIT Clamping force: 2250 kN (230 t) Tie bar spacing (H×V): 610 × 560 mm Platen size (H×V): 880 × 830 mm Moving platen stroke: 550 mm Max daylight: 1230 mm Mold height min–max: 250–680 mm Ejector force: 49 kN (5.0 t) Ejector stroke: 130 mm INJECTION UNIT – 50 mm Screw diameter: 50 mm Shot volume: 392 cm³ Shot weight PS: 361 g Shot weight PE: 286 g Max injection pressure: 200 MPa Max holding pressure: 200 MPa INJECTION SPEED / RATE STD speed: 250 mm/s STD rate: 490 cm³/s HIGH DUTY speed: 160 mm/s HIGH DUTY rate: 314 cm³/s HIGH SPEED speed: 350 mm/s HIGH SPEED rate: 687 cm³/s PLASTICIZING Plasticizing capacity PS: 160 kg/h Screw speed: 255 rpm Screw torque: 1421 Nm Nozzle contact force: 29.4 kN (3.0 t) ELECTRICAL Main breaker STD: 125 A Main breaker HIGH DUTY: 125 A Main breaker HIGH SPEED: 175 A Transformer: 75 kVA Heater capacity: 15.2–16 kW DIMENSIONS & WEIGHT Length: 6.4 m Width: 1.7 m Height: 2.0 m Weight: 9.9 t

Condition: defective spare-parts repository (used), Year of construction: 2004, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Hfodpsyhn Tgjfx Afajc Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Condition: good (used), Year of construction: 2000, operating hours: 132,186 h, Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Hedpfx Asyhnvhofajfc Nominal current (A): 99,5 Rated power (kW): 55 -With dosing system -Handling robot Wittman, available as an option upon customer request Condition: good condition (Oil leak, original monitor defective)

Condition: excellent (used), Year of construction: 2004, operating hours: 97,919 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75 Hodpfxoyhnrpe Afajfc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 Hfsdpfxsyhby Hs Afasc • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade Hfjdpfx Afsyhbq Eeaoc • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: Hfsdpfeyg Nkwjx Afaec • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: Hedpfx Afjyg I Iheaefc • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment Hfodpfx Afoyg I Egeasc • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Hodpfx Afeyg Hbgoaofc

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Hfsdpsyg Eu Sjfx Afaec Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Hfjdpfx Afoygx Ursajc Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 40 mm, clearance between the columns: 630 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, total length: 7,050 mm, total width: 2,050 mm, total height: 2,350 mm, overall weight: 13,050 kg, Equipment: documentation/manual, warehouse no.: 503584 manufacturer: ARBURG type: Allrounder 630 H 2500-400 controller: Selogica year of construction: 2019 clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 750 mm max. open daylight: 1300 mm opening stroke: 550 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included screen text german CEE-socket 16A machine incl. Handling machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface for handling interface OPC Schuko-socket 10A measures of machine (without robot) l x w x h: 7.05m x 2.05m x 2.35m total weight: 13050KG Hsdeygv Rwspfx Afajfc technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift V 15 year of construction: 2019 handling weight: 15 kg total weight: 500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language Hsdsygv Ntjpfx Afaefc CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG