SPGroup a.s.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Ijdezu R Ulepfx Aidjif Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Ijdpfszu Nvzsx Aidoif Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: good (used), Year of construction: 2020, functionality: fully functional, power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 400 V, overall weight: 750 kg, Used twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Nominal volume: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 400 V / 50 Hz Weight: approx. 750 kg Iisdpfx Aozumpxjidof pneumatically operated discharge flap Location: Canada The electrical control system was designed according to Canadian regulations and must be inspected and, if necessary, modified to comply with European regulations for operation in Europe. Used condition with production-related signs of wear and material residues. Technical specifications are without guarantee and subject to prior sale.

Condition: excellent (used), Harp racks for glass transportation Isdpfjzty Rmox Aidsif 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 5 units in stock In very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Ijdpfxozqtp Ro Aidoif Height: 500 mm Total weight: 120 kg Condition: good, second-hand

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 202101410, For sale: a brand-new, unused Junya horizontal car wash – Chinese-made, purchased in 2022. It was bought to set up a second lamination line, but this plan was not implemented. The machine is assembled and ready for use in the workshop; all that is needed is to fill it with water. The machines are of very good quality and operate reliably across three shifts. Iiodpfxozqtbye Aidef Price: PLN 95,000 net. Terms negotiable.

Condition: good (used), Height: 1600 mm Width: 1200 mm Depth: 1100 mm Weight: approx. 250 kg Condition: good, second-hand Iisdpfx Ajzqf Edeidef

Condition: good (used), Year of construction: 1990, Unit with side support table External dimensions of drilling machine: Iiedpjzqfv Nofx Aidjf Height: 1700 mm Width: 700 mm Depth: 1500 mm Weight: approx. 320 kg External dimensions of the side table: Height: 1100 mm Width: 2600 mm Depth: 1410 mm Condition: good, second-hand

Condition: good (used), Year of construction: 2001, Pumping capacity/flow rate: 16/19 m³/h Pump originally from a Lisec A2RL (molecular filling system) Width: 570 mm Depth: 250 mm Height: 510 mm Condition: good, second-hand Iiodpfx Aozqd Evoidjf

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Depth: 500 mm Weight: approx. 20 kg Iijdjzqc Uvopfx Aidsf Condition: good, second-hand

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Iiedezqc E Uspfx Aidjf Condition: good, second-hand

Year of construction: 1992, condition: good (used), Lifting capacity: 800 kg 7 suction plates Electrical connection: 220/240 V (vacuum pump) Ijdpfszqczvox Aidoif Width: 3000 mm Height: 900 mm Depth: 250 mm Weight: 80 kg Condition: good, second-hand

Condition: good (used), Working height: 880 mm Extendable table top Width: 1300 mm Iiedpfx Aijzpaw Sedsf Depth: 800 mm Height: 1100 mm Weight: approx. 50 kg Condition: good, second-hand

Condition: good (used), Year of construction: 1999, The system is electrically adjustable and has a total of 24 compartments. 2 compartments with a 210 mm shelf height and 22 compartments with a 150 mm shelf height. External dimensions: Iiodpfezn U Atex Aidef Height: 3520 mm Width: 8630 mm Depth: 3520 mm Condition: good, second-hand

Condition: used, Year of construction: 2008, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 8-disc glass grinding and polishing machine. In excellent working condition! 8 discs Glass thickness 3 - 35 mm Min. glass size 40X40 mm Speed ​​0.5 - 5m/min. Iiodpfx Ajzn Nrieidef Power: 19.5kW Power supply: 400V The machine is in excellent technical condition, can be viewed, tested, and purchased at a pre-arranged time.

Year of construction: 2012, condition: ready for operation (used), An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Iijdpfxjznx H No Aidjf

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Iedpfx Aijznufusdjif Total rack dimensions: 1150 x 1150 mm Approx. 82 pcs. available Very good and clean condition As is Available immediately

Condition: ready for operation (used), A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Isdpoznmxgefx Aidoif

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg 5 pcs. in stock New, never used ! Available immediately Iiedoznlrfspfx Aidjf

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Iisdpszmyrdsfx Aidsf Weight: approx. 25 kg Condition: good, second-hand

Year of construction: 1995, condition: good (used), The unit has 10 compartments, each with an 80 mm glass shelf. Model: M-10. Max. glass height: 1900 mm Iisdjzmygzopfx Aidsf Width: 2140 mm Height: 2320 mm Depth: 2750 mm Weight: approx. 1500 kg Condition: good, second-hand

Year of construction: 1995, condition: good (used), The unit has 6 compartments, each with a 215 mm glass shelf. Model: M-6. Max. glass height: 1900 mm Width: 2450 mm Height: 2320 mm Depth: 2750 mm Condition: good, second-hand Iijdpfjzmx H Tex Aidjf

Condition: used, Year of construction: 2006, functionality: fully functional, DENVER QUOTA V – Year 2006 CNC Machining Centre 3-Axis Maximum Dimensions: 1550 x 3200 mm Iijdpfx Aezkva Eoidjf Weight: 3900 kg New spindle In good working condition.

Year of construction: 2002, condition: ready for operation (used), A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible. Iisdpfx Aszi Eigeidjf

Condition: good (used), Oil-water separation system for compressor condensate External dimensions: Diameter: 600 mm Height: 1180 mm Weight: approx. 50 kg Isdszh Iddspfx Aidjif Condition: good, second-hand