Eps-Recycle

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor. Blodpfx Asyvpyfebwof

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. Bedoyvpxzepfx Abwjlf On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Blodpfxswg Sgcj Abwof Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.