Balfor srl

Condition: used, Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, 75 L Intensive Rubber Mixer with a 220 kW AC Motor, Gearbox, Drive and Control Panel, Pneumatic Hopper Door, and Hydraulic Discharge Door. Ready for operation and in good condition. Gjdpfxszufu Ho Ai Sjka

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Machine details: Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Gedpezudfdofx Ai Seka Country of manufacture: Italy The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment Gkjdezuaprjpfx Ai Ssa 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace Gsdpfx Aozuabzji Sska If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Bushing Cutoff IAC Enclosure Gkodszt Tauopfx Ai Sja

Year of construction: 2005, condition: used, Plastic shredder Gksdpfxjzt R Szj Ai Ssa

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Gksdpjzt R E Uefx Ai Sja Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, functionality: fully functional, Separate single-position unit with a horizontal roller shaft, presumably with pneumatic clamping, housing/drive unit, pneumatic auxiliary functions, and its own control panel with a material length counter. Intended for the controlled feeding of web-shaped materials into a subsequent coating, laminating, or converting system. Manufacturer: Cavitec, Caratsch–Villars, Münchwilen, Switzerland. Model, year of manufacture, serial number, electrical connection values, maximum roller data, and web speed are unknown due to the absence of a nameplate. Godjzt I U Topfx Ai Sjka

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Gsdpfxozt Ir Se Ai Sska Min. radius (CLR) 55 Control system PLC Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Gsdpfezt Iq Usx Ai Seka

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, Gsdpjzt Ip Rjfx Ai Seka protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, Gjdpfx Aezt Hmzsi Sjka • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Year of construction: 2004, condition: used, 2004 Design Environmental FS5250-25S Environmental Chamber with Digital Control Ambient Temperature Range 10°-27°. Ambient Humidity Range 10%-80%. Refigerant R404A. Chamber Dimensions Approx 1,750mm x 1,500mm x 2,000mm High. With Stand Alone Compressor. S/No. A3254. Gjdpszty Aiofx Ai Sjka Dimensions of Machine Approx 2,700mm x 1,700mm x 2,400mm. Power Supply 415 Volt, 21.9 Amp.

Year of construction: 2007, condition: used, Free-running crate transport system for a reusable glass bottle filling line. The system consists mainly of motorised chain conveyors, with some roller conveyors as well. Both straight and curved conveyor sections are included. Additional title: Crate conveyor system comprising motorised conveyor chains Capacity bottle filling line: 12000 bo/h Current: 63 A Voltage: 400 V Frequency: 50 Hz Gkodpfjztyzfex Ai Ssa Operation / Control: Simatic S7-300

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Volume container 1 appr.: 750 l Volume container 2 appr.: 500 l Gsdpfx Aoztywmoi Seka Length: 2,20 m Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Year of construction: 2000, condition: used, Conveyor belts for glass bottles, with 2 pressureless merges Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/hour Manufacturer: Krones Year of manufacture: 2000 Additional title: Section up to filler Capacity appr.: 33000 bo/h Conveyor belt widths: 4 conveyor belts Formats: 0.33 l Vichy, 0.33 l Euro, 0.35 l lemonade, and 0.5 l NRW Operation / Control: Simatic S7-300 Gkjdpfx Aioztyblo Sea Material: mainly stainless steel Position: free standing Features: conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle merges (17/9/7/5/3/1 and 12/7/3/1 belts), automatic belt lubrication

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW N = 9 rpm Gkedpfsztxw Ssx Ai Sja Weight: 450 kg Dimensions: 630 x 1500

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m Gedpfx Asztxvnei Sjka - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs.

Year of construction: 2010, condition: used, The belt dryer is ready for use; a video can be sent via WhatsApp. The dryer is no longer needed. Gsdpfjztwhvsx Ai Soka It includes the feed screw, the blower unit, and the discharge screw, meaning it is complete.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1580000152, total width: 610 mm, total height: 1,300 mm, total length: 690 mm, overall weight: 89 kg, You can find more information in the attached brochure. This is the TAC V+ GR/BK model. Gksdpfsztwfhex Ai Sja There are 3 air purifiers available. If all 3 are purchased, the total price is €500.

Condition: new, CNC 76R1 Max. capacity for steel tube (mm): 76x5 Max. capacity for stainless steel tube (mm): 76x3 Max. capacity for steel profile (mm): 60x60x3 Max. radius (CLR): 250 Min. radius (CLR): 35 Gjdpfoztpunox Ai Soka Max. bending angle: 190(°)

Condition: new, CNC-38/R3 Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Gksdpfxjztpf To Ai Sja Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Machine Weight 3000 kg

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers Gkodpfxoztl R Ss Ai Sja • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Gsdpfx Ajztaahsi Soka Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. Gkjdpfxjzr I Aze Ai Sea The machine can be inspected in 06502 Thale by appointment.