Artsy Interiors

Condition: good (used), Year of construction: 1986, grinding depth: 500 mm, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: Grindable diameter with workpiece protection: internal / internal 20..400 mm; external 500 mm Max. workpiece diameter with workpiece protection: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from the workpiece spindle flange Hjdszd Aqwspfx Adrsnn to the grinding spindle support: 1250 mm

Condition: used, functionality: fully functional, mileage: 254,160 km, power: 368 kW (500.34 HP), first registration: 09/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. 650 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 610 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Hsdpfszd Aqqex Adrsnn Exterior LED headlamps. Static corner lights - works with indicator at low speed to light up direction. Front fog lights - white.

Condition: new, Year of construction: 2024, functionality: fully functional, Next-Generation Mobile Banding Machine – Flexible, Efficient, and Innovative Looking for a modern and efficient solution for bundling and labeling your products? Our next-generation mobile, manually operated banding machine combines maximum flexibility with innovative technology to deliver reliable and cost-effective packaging processes. Its compact design allows the machine to be easily moved and used at different workstations. The intuitive operation enables fast and secure banding of products, cartons, printed materials, and bundled goods. A key feature is the vacuum-assisted band guiding system, ensuring precise, smooth, and highly reliable band feeding throughout the banding process. In addition, the machine features QOL (Quick-On-Line) band changes, significantly reducing setup times and minimizing downtime. This results in increased productivity, greater operator convenience, and a more efficient packaging workflow. Key Benefits: Mobile design for maximum flexibility Simple and intuitive manual operation Next-generation banding technology Innovative vacuum-assisted band guiding system for enhanced process reliability QOL (Quick-On-Line) band changes for rapid material replacement Reduced setup times and downtime Compatible with paper and plastic banding materials Compact, space-saving construction Sustainable packaging solution with reduced material consumption Ideal for small to medium production volumes Applications: Shipping and logistics Food and consumer goods industries Printing and publishing Hnsdpszd Aqkofx Adrsn Warehousing and order fulfillment Retail and manufacturing The next generation of banding technology – mobile, reliable, and efficient.

Condition: used, axle configuration: 3 axles, first registration: 04/2007, total length: 13,630 mm, total width: 2,540 mm, wheelbase: 10,370 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = Hodpfszd Aqdsx Adronn - Air suspension = Further Information = Unladen weight: 16,380 kg Payload: 28,620 kg Gross vehicle weight: 45,000 kg Loading platform height: 95 cm Damages: none Registration number: OJ-15-SY

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 160 mm Swiveling spindle: -10° - 45° Hodpfx Adszd Ap Tjrjnn Speeds: 3000/4500/6000/8000/10000 rpm Manual adjustment of spindle height and angle Spindle lock Work table dimensions: 760/2500 x 1000/1500 mm Adjustable support arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1500 mm Width: 2500 mm Height: 1350 mm

Condition: used, Year of construction: 1997, 2 x pneumatic wrench, single-hand operation, with indexing system Two speeds Infinitely adjustable miter stop Pneumatically adjustable on two levels via foot pedal Hedpfx Ajzd Aptjdrjnn Table height: 910 mm Table size: 700 x 380 mm Max. drilling depth: 145 mm Max. through-hole length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 3000 rpm Space requirement: 1600 x 2350 mm Net weight: approx. 300 kg Location: Nattheim

Condition: new, Year of construction: 2021, Mobile Banding Machine – Flexible, Compact, and Ready to Use Hodpfjzd Apgjx Adrjnn Looking for a simple and efficient solution for bundling and labeling your products? Our mobile, manually operated banding machine offers maximum flexibility for a wide range of applications in production, shipping, and logistics. Thanks to its compact design, the machine can be easily moved and used at different workstations. Its user-friendly operation enables fast and reliable banding of products, cartons, printed materials, and bundled goods without the need for complex installation. Using paper or plastic bands, products can be neatly bundled, identified, and secured for transport. Key Benefits: Mobile design for flexible use Manual operation – simple and intuitive Fast bundling and labeling of products Suitable for paper and plastic banding materials Compact, space-saving construction Sustainable packaging solution with reduced material consumption Ideal for small to medium production volumes and seasonal applications Applications: Shipping and logistics Food and consumer goods industries Printing and publishing companies Warehousing and order fulfillment Retail and manufacturing operations Bundle efficiently, package sustainably, and work flexibly with a mobile banding machine designed for modern business needs. Suggested Advertisement Headline: Mobile Banding Machine – Flexible Bundling, Easy Operation, Sustainable Packaging

Condition: used, mileage: 19,798 km, power: 89 kW (121.01 HP), first registration: 08/2007, fuel type: gasoline, Year of construction: 2007, Unladen weight: 206 kg Damage: none License plate: 62-MR-SG Hnodpfxozd Apaj Adrjn

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Storage location: Nattheim. Hnjdpszd An Nsfx Adron

Condition: good (used), Year of construction: 2022, Offer 26145 Technical data: - Cutting range: 33 - 174 mm - Wall thicknesses up to: 5 mm - Equipped with a hard metal cutter - Central pipe clamping system via handwheel - Manual rotational drive / cutting drive - Height-adjustable saw unit Hnodpfx Aszd An Ajdrsn - Drive: 220 V / 1200 watts - Space requirement: approx. W 900 x H 1000 x D 400 mm - Weight: approx. 300 kg - 2 roller guides: 1500 mm

Condition: used, Year of construction: 1998, Plate size: 2500 x 1300 mm Total clamping force: 70 tons Button operation Hjdpfszd Anpsx Adrsnn Opening: 400 mm Cylinders: 4 Motor power: 0.75 kW Gold-anodized heating plates Double safety release cord with rack and pinion parallel guidance Dimensions: 3050 x 1700 x 1910 mm Storage location: Supplier

Condition: good (used), functionality: fully functional, mileage: 65,085 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,130 kg, maximum load weight: 1,370 kg, first registration: 10/2021, next inspection (TÜV): 06/2028, loading space length: 3,300 mm, loading space width: 1,780 mm, loading space height: 1,950 mm, fuel tank capacity: 71 l, emission class: euro6d, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, start-stop system, trailer coupling, truck registration, 47 Paint color Arctic White MB 9147 AR2 Axle ratio I = 3.923 BH1 Hold function BH4 Control code for hydraulic unit variant 3 BK2 Control code for wheel brake configuration 2 C6L Multifunction steering wheel CB1 Suspension for comfort and cargo protection CB7 Stabilization level I CL1 Steering wheel adjustable in inclination and height D03 High roof D13 Mounting rails for roof carrier D51 Partition wall, continuous with window E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1U USB socket 5 V E2N Control for Pro features in NTG6 E3M MBUX multimedia system with 7-inch touchscreen E43 Trailer socket, 13-pin ED4 Fleece battery 12 V 92 Ah EE5 Ultracap - locking for automatic transmission ES5 Charging package for instrument panel EW6 Pre-installation for Remote Services Plus EY2 Pre-installation for Live Traffic Information F49 Heated windshield F64 Exterior mirrors, electrically folding F68 Exterior mirrors, heated and electrically adjustable FKA Box van FR8 Rear view camera G43 9G-Tronic H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic climate control system Tempmatic IG4 Standard IK0 Complete vehicle IL1 Domestic (Germany) IL5 Left-hand drive IR4 Wheelbase 3665 mm (BM - code for body variant) IT4 3.5-ton vehicle J55 Seat belt warning system for co-driver's seat J58 Seat belt warning system for driver's seat J65 Outside temperature display JA7 Blind Spot Assist JA8 Crosswind Assist JF1 Rain sensor JH3 Communication module (LTE) for digital services JI7 Start-up mileage for maintenance interval 60,000 km JW8 Attention Assist K13 Main tank 71 liters KP7 Exhaust gas purification SCR Generation 4 L94 Parking lights omitted LA2 Headlamp Assist LB1 Side marker lights LB5 3rd brake light LC2 LED light strip in the cargo area LC4 Comfort control unit for the roof LE1 Adaptive brake light LX5 Europe M60 Generator 14 V/250 A MJ8 ECO start/stop function MT2 Emission class Euro 6D-TEMP N1 Gr.III/N2 MU5 Engine OM654 DE 20 LA 125 kW (170 hp) Q11 Longitudinal member reinforcement QA7 Trailer coupling for increased trailer load, 3.5 tons QA9 Step on the rear door with trailer coupling R65 Spare wheel carrier under the frame end R87 Spare wheel S22 Armrest for driver's seat, ISO-fix (child seat fastening system) S23 Co-driver's seat, double seat S28 Stowage box on the side under the seat in front left SA5 Airbag driver SA6 Airbag co-driver SB1 Driver's seat comfort SK2 Seat occupancy recognition driver's seat T16 Sliding door, right T77 Grab handle at the entrance to the cargo area sliding door on the partition wall T86 Entry handle on the rear right corner pillar V35 Wheel arch cladding V42 Lashing rails on the side wall on the railing V43 Wooden floor V85 Smoker's package V94 Cable duct on the side wall V95 Cable duct on the rear portal VA2 Interior lining of the cargo area up to roof height (wood) VA7 Stowage compartment with net in the rear doors VF7 Fabric Maturin black W61 Window in the tailgate/rear doors X30 Certificate of Registration Part 2 X99 Manufacturer Mercedes-Benz AG XC9 COC documents XG7 Without weight increase/reduction 3500 kg XI1 Model year G1-I XM1 Noise reduction measures XM4 Acoustic package XO5 Digital operating manual XO9 Mercedes-Benz Mobilovan with DSB and GGD Hjdpfxezd Anco Adrenn XU1 Signage/printed matter, German XV0 Control code - BZM inspection XW9 Control code for WLTP conversion XZ0 Model generation 0, model year 2010 Y10 First-aid kit Y43 Jack, hydraulic Y44 Warning triangle Z1N Approval N

Condition: used, mileage: 230,000 km, power: 375 kW (509.86 HP), first registration: 05/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, electric window regulation, fog lights, power assisted steering, power mirror, = Additional options and accessories = - Disc brakes - EPS without coupling - Hub Reduction - Immobilizer - PTO - Radio - Radio CD player - Sper = Remarks = Superstructure Material: Staal Mercedes Arocs 3251, 2018, 230,000 km, Euro 6, 8x4 with hub reduction, CIFA MK 25H Carbotech, Remote control Hsdpfx Aozd Am Sjdrenn = More information = Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 37.000 kg Make of bodywork: CIFA MK 25H Carbotech Water tank: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Hodszd Amxopfx Adrjnn Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller

Condition: used, mileage: 176,200 km, power: 184 kW (250.17 HP), first registration: 02/2014, fuel type: diesel, empty load weight: 9,475 kg, maximum load weight: 8,525 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,400 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 7,000 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, MAN TGM 18.250 flatbed truck with crane First registration: 2/2014 Only 176,200 km, with documentation Euro 5 emission class Short cab Automatic transmission Air suspension, rear axle Hnedpfx Aezd Amrodrjn Tires 315/70 R19.5, tread depth approx. 60% Flatbed: 7000 mm Wheelbase: 5400 mm Permissible total weight: 18,000 kg Unladen weight: 9,475 kg Crane: HMF 1430 Year of manufacture: 2013 Radio remote control 5 extensions in total, 3x hydraulic and 2x mechanical 4.40 m / 2870 kg 6.30 m / 1910 kg 8.30 m / 1400 kg 10.40 m / 1110 kg 12.70 m / 840 kg (mechanical extension) 15.00 m / 650 kg (mechanical extension) Hook height approx. 19 meters Export/net price: 29,900 euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 491,600 km, power: 300 kW (407.89 HP), first registration: 10/2005, fuel type: diesel, empty load weight: 18,440 kg, maximum load weight: 7,560 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: day cab, gearing type: other, emission class: euro3, suspension: steel-air, loading space length: 7,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, Mercedes-Benz Actros MP2 2541 6x2 flatbed truck with crane First registration: 10/2005 491,600 km with documentation Short cab EPS Telligent transmission with clutch Air conditioning Air suspension on rear axle Steerable third axle Trailer coupling Tires 385/65 R22.5, tread depth approx. 50% Tires 315/70 R22.5, tread depth approx. 50% Flatbed: 7500 mm Unladen weight: 18,440 kg Crane: Effer 310 + jib Year of manufacture: 2005 Radio remote control 4-point outrigger system 11 hydraulic extensions in total Main crane: 6 hydraulic extensions 2.36 m / 10,500 kg 4.34 m / 6,140 kg 6.24 m / 4,010 kg 8.24 m / 2,850 kg 10.32 m / 2,140 kg 12.49 m / 1,690 kg Hsdpfx Adozd Amlorenn 14.72 m / 1,390 kg 16.95 m / 1,200 kg Hook height without jib: approx. 20.50 meters + Fly jib: 4 hydraulic extensions + 1 mechanical extension 19.75 m / 390 kg 21.30 m / 335 kg 22.97 m / 300 kg 24.37 m / 265 kg 25.77 m / 230 kg 27.35 m / 180 kg (mechanical extension) Hook height: approx. 31 meters Export/net price: 55,900 Euros All information without guarantee, subject to change.

Condition: used, mileage: 491,600 km, power: 300 kW (407.89 HP), first registration: 10/2005, fuel type: diesel, empty load weight: 18,440 kg, maximum load weight: 7,560 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: day cab, gearing type: other, emission class: euro3, suspension: steel-air, loading space length: 7,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, Mercedes-Benz Actros MP2 2541 6x2 flatbed truck with crane First registration: 10/2005 491,600 km with documentation Short cab EPS Telligent transmission with clutch Air conditioning Air suspension on rear axle Steerable 3rd axle Trailer coupling Tires 385/65 R22.5, tread depth approx. 50% Tires 315/70 R22.5, tread depth approx. 50% Flatbed: 7500mm Unladen weight: 18,440 kg Effer 310 crane + jib Year of manufacture: 2005 Radio remote control 4-point outrigger 11 hydraulic extensions in total Main crane: 6 hydraulic extensions 2.36 m / 10,500 kg 4.34 m / 6,140 kg 6.24 m / 4,010 kg 8.24 m / 2,850 kg 10.32 m / 2,140 kg 12.49 m / 1,690 kg 14.72 m / 1,390 kg 16.95 m / 1,200 kg Hook height without jib approx. 20.50 meters + Fly jib: 4 hydraulic extensions + 1 mechanical 19.75 m / 390 kg 21.30 m / 335 kg 22.97 m / 300 kg 24.37 m / 265 kg 25.77 m / 230 kg 27.35 m / 180 kg (mechanical extension) Hook height approx. 31 meters Export / net price: 55,900 Euro All information is provided without warranty, errors and omissions excepted. Hnodpfxezd Amfj Adrsn

Condition: used, mileage: 176,200 km, power: 184 kW (250.17 HP), first registration: 02/2014, fuel type: diesel, empty load weight: 9,475 kg, maximum load weight: 8,525 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,400 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 7,000 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, MAN TGM 18.250 flatbed truck with crane First registration: 2/2014 Only 176,200 km with documentation Euro 5 emission class Short cab Automatic transmission Air suspension on rear axle Tires 315/70 R19.5, tread depth approx. 60% Flatbed: 7000 mm Wheelbase: 5400 mm Permissible total weight: 18,000 kg Unladen weight: 9,475 kg Crane: HMF 1430 Year of manufacture: 2013 Radio remote control 5 extensions in total, 3x hydraulic and 2x mechanical 4.40 m / 2870 kg 6.30 m / 1910 kg Hnodpfx Ajzd Al Uodrsn 8.30 m / 1400 kg 10.40 m / 1110 kg 12.70 m / 840 kg (mechanical extension) 15.00 m / 650 kg (mechanical extension) Hook height approx. 19 meters Export/net price: 29,900 Euros All information without guarantee, subject to errors.

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Adjustable cradle arms Motor power: 4 kW Power supply: 380 V Hnjdpfezd Al Isx Adrjn Overall dimensions: Length: 2550 mm Width: 1000/1300 mm Height: 1300 mm

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Hsdpfszd Alzsx Adrenn Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, mileage: 365,000 km, power: 316 kW (429.64 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,650 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, crane, differential lock, = Additional Options and Accessories = - Heated mirrors - Brake booster - Differential lock - Rotating beacon Hjdpfxjzd Alue Adrenn - Rearview camera - Sun visor = Notes = 2 - Side tipper - Crane HMF 2120 - 2x hydraulic - Rotor with gripper function - Radio remote control - Hub reduction - Engine brake - DIF lock - Flashing lights - Sun visor - heated exterior mirrors - Multifunction steering wheel - Air conditioning - Camera - Gross vehicle weight 32,000 kg - Tare weight approximately 17,000 kg - Wheelbase 5650 mm - = Further Information = General Information Intended use: Construction Reference number: 10 Technical Information Engine displacement: 10,837 cc Axle Configuration Suspension: Leaf spring Front axle 1: Steerable Front axle 2: Steerable Weights Unladen weight: 17,000 kg Payload: 15,000 kg GVW: 32,000 kg Functional Crane: HMF 2120, behind the cab = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, functionality: fully functional, mileage: 188,885 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Hsdpjzd Akwjfx Adrsnn Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Excellent hydraulic double-column press NH 25 (3163) fully overhauled machine – manufactured in 1987/overhauled in 2026 Press force: 250 kN Installation height: 280 mm Hodpfszd Akqjx Adrenn Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul: new control system new light curtain hydraulic system revision

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Hsdpfxjzd Akke Adrenn Height: 1500 mm

Condition: good (used), Geared motor, electric motor, electric geared motor, worm geared motor Hnedpozd Akdofx Adrjn -Manufacturer: Eberhard Bauer, geared motor -Type: D447/166 -Speed: 28 rpm -Power: 3.67 kW -Shaft: Ø 55 x 110 mm -Dimensions: 900/400/H350 mm -Weight: 130 kg