Lintera - Riga SIA

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation Csdpsz Iypvsfx Aa Tshc ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, number of axes: 3, This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details. Table Clamping Surface: 4350 x 900 mm (with 7 T-slots 18H7 RTA integrated)Swivel Head: Stepless positioning swivel headNC Rotary Table: Type RTA 4 L - 800Spindle Speed Range: 40 - 12,000 rpmSpindle Taper / Tool Holder: SK 40 DIN 69871-A (Hohlwellenmotor, water-cooled)Spindle Note: Spindle replaced/renewed a few years ago for nearly €30,000Tool Changer: 36 positions, movable in Y-directionConnected Load: 69 kVAVoltage: 3x400V/230V/N/PE, 50 HzControl Voltage: 24 V DCFuse Protection: max. 125 AAdditional Equipment:External band filter coolant system Type SA 25/600 (30 bar, 400 Liters)Slat conveyor chip conveyor Type FSB 300 (discharge height 1200 mm, left side)Minimum quantity lubricationElectric handwheel HR 4103D Touch Probe Type MP 10 EVisport (Fabrikat Hema)Heat exchanger Type SK3328 (Fabrikat Rittal)2 Hand spray guns Chodpfx Asz Iyppoa Tec Technical Specification Taper Size SK 40

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods Cjdpfx Aoz Iypisa Tshc FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 11 mm Front right - 11 mm Middle left - 13 mm Middle right - 13 mm Rear left - 12 mm Rear right - 11 mm

Condition: excellent (used), functionality: fully functional, USM POWERSERT impact wrench with automatic screw feeding Chodpfx Aajz Iyn So Tec for fastening hardware General overhaul

Condition: used, functionality: unexamined, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0008248 - Manufacturer Code: MC07B0040-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer a refurbishment service, please contact us. Cjdpoz Iynxofx Aa Tshc

Condition: new, Year of construction: 2026, functionality: fully functional, -Dürkopp Adler 969-190080 industrial sewing machine, saddle stitching machine The H-Type single-needle, double-chainstitch, free-arm sewing machines impress with excellent stitch quality and consistent, firm stitch formation when processing extremely thick sewing threads up to Nm 5/3 – and this up to a maximum stitch length of 15 mm. The powerful material feed and the enormous piercing power of the H-TYPE are the ideal prerequisites for sewing materials with thick material thicknesses. The maximum presser foot lift of up to 30 mm facilitates the handling of large and voluminous materials. An XL barrel shuttle with 70% larger bobbin capacity and a simultaneous maximum speed of 1,250 rpm increase productivity in this area to unprecedented levels. Csdpfxoz Iynrj Aa Tohc -2-year warranty – shipping +€150 including VAT, or self-collection -220 volt Dürkopp Adler motor

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Csdpfjz Iynfsx Aa Tohc Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis DMG MORI MILLTAP 700 was manufactured in 2013. It features a spindle speed of 24,000 rpm and a travel distance of 700 mm in the X-axis, 420 mm in the Y-axis, and 380 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the DMG MORI MILLTAP 700 vertical machining centre we have for sale. Contact us for further details. Technical Specification Taper Size BT 30 Cjdpfx Aasz Iym Io Tehc

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG MORI ecoMill 800 V was manufactured in 2015. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a BT40 taper. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 800 V vertical machining centre we have for sale. Contact us for further details. Technical Specification Chodoz Iymuepfx Aa Tec Taper Size BT 40

Condition: new, functionality: fully functional, fuel type: diesel, empty load weight: 14,560 kg, maximum load weight: 25,440 kg, overall weight: 40,000 kg, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, fuel tank capacity: 290 l, brakes: intarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 8,200 mm, total width: 2,550 mm, loading space volume: 20 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, blind spot assist, central locking, differential lock, electric window regulation, fog lights, hill-start assist, lane keeping assist, onboard computer, power mirror, retarder, tire pressure monitoring, Iveco T-Way AD410T54 Cursor 13 - NEW VEHICLE 3-way tipper Gervasi 20 cbm 8x4 Chsdpfoz Iymhex Aa Tjc Differential lock leaf-spring suspension Automatic transmission (TX 12-speed) 13T AP axles reinforced engine brake Wheelbase 4.25m Auxiliary drive / tipping hydraulics ZF Intarder Preparation for trailer coupling (approved total towing weight 56,000 kg) Euro 6 GVW 40,000 kg - Payload 25,440 kg Tires 100% 290L tank Rocking mode intelligent cruise control Reversing assistant (camera) Blind spot assistant Driver fatigue warning Sun visor Air conditioning luxury air-suspended driver's seat Central locking electric windows and door mirrors ABS All information without guarantee/subject to errors

Condition: good (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, 1998 MTK 20FT swap body tank container 30,970 L / 1 compartment Chodpfx Ajz Iymbea Tec bottom discharge UN PORTABLE, T7 steam heating AMKD 2.5Y test / CSC: 02-2028 = Further information = General information Year of manufacture: December 1998 Model year: 1998 Usable material: Chemicals Weights Tare weight: 4,290 kg Payload: 29,710 kg GVW: 34,000 kg Functional Load compartment volume: 26,000 l Body manufacturer: HOLVRIEKA 26,000L TC, 1 compartment, L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: good Optical condition: good Further information Please contact Arne Honingh for further information.

Condition: used, functionality: unexamined, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0012095 - Manufacturer Code: 6ES7422-1BL00-0AA0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA PANEL SAW - If interested, we offer a refurbishment service, please contact us. Chsdpjz Iyl Djfx Aa Tsc

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.720 kg Carrying capacity: 35.280 kg Cedpjz Iylwsfx Aa Tohc GVW: 39.000 kg APK (MOT): tested until 02/2027 Registration number: OJ-98-VX

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l Chsdpjz Iyldofx Aa Tsc • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2009, total length: 8,400 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,770 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lifting Axle - Alloy Wheels - Air Suspension - Drum Brakes = Notes = 11/2009 VAN HOOL 20FT ADR (EX/II, EX/III, FL, AT) chassis with ABS/EBS, SAF axles with drum brakes, lifting axle on the 1st axle, ALCOA wheels, unladen weight: 3,300 kg, permissible total weight: 39,000 kg, tires 385/65-R22.5 (tread depth left: 6/12/8 mm; tread depth right: 6/6/6 mm), Dutch registration. = Further Information = Axle Configuration Tire Size: 385/65-R22.5 Axle Brand: SAF DRUM Brakes: Drum Brakes Suspension: Air Suspension Rear Axle 1: Alloy wheels; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 75%; Tire tread depth right: 40% Rear Axle 3: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 40% Weights Unladen weight: 3,300 kg Payload: 35,700 kg GVW: 39,000 kg Functional Body Brand: Van Hool 3B2013 Condition Technical condition: good Chedjz Iyfwspfx Aa Tsc Optical condition: good Identification License Plate: OK-02-YF

Condition: ready for operation (used), Year of construction: 2001, This 4-axis HELLER MCH 250 was manufactured in 2001. It features a robust coolant/filter unit, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 185 A Codpjz Iyfqsfx Aa Tshc

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis Cjdpfxoz Iyd Te Aa Tohc - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes

Condition: excellent (used), functionality: fully functional, mileage: 175,000 km, first registration: 11/2017, fuel type: diesel, overall weight: 16,000 kg, tire size: 285/70R19,5, tire condition: 70 %, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, suspension: air, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, EBS, air conditioning, airbag, blind spot assist, crane, cruise control, electronic stability program (ESP), lane keeping assist, navigation system, non-smoking vehicle, parking heater, power assisted steering, seat heater, traction control, truck registration, HIAB CRANE. Codpfxoz Iyd Hj Aa Tehc

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, MACHINE BUILT 2008 / COMPLETELY REFURBISHED 2026 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 16 - Number of stations Special - Format 35 x 64 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 16 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 64 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table Chjdpfsz Iydyjx Aa Tjc - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2010, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,980 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 435/50R 19.5, tire condition: 20 %, wheelbase: 8,750 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Chedpez Iydtjfx Aa Tec Tyre size: 435/50R 19.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.840 kg Carrying capacity: 31.160 kg GVW: 39.000 kg Identification Registration number: OK-96-ZZ

Condition: used, axle configuration: 2 axles, first registration: 11/2015, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - SAF Assen = More information = Cjdpfx Asz Iydmoa Tehc Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Tail lift: BÄR, tail lift

Condition: good (used), Workpiece width: 1,200 mm Workpiece height: 500 mm Drill diameter: 8 - 40 mm Number of drilling spindles: 3 pcs. Spindle speed: 150 - 1,100 rpm Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drill diameter: 8 - 40 mm Spindle speed: 150 - 1,100 rpm Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid retract: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Saw unit Saw blade diameter: 1,430 mm Saw blade type: HSS segment saw blade Saw blade dimension: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid retract: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of drilling unit: 43.0 kW Csdpsz Iydgofx Aa Tohc Installed total power of the complete drilling and sawing system: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: used, Year of construction: 2021, operating hours: 1,556 h, 2021 | Kubota U50-5 with 3 excavator buckets | Used Mini Excavator < 7t | 1556 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Chjdpfxjz Iydae Aa Toc 👷‍♂️ Inspected by an independent expert 62 inspection points 59 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine worked well during the inspection. It has low hours and has been very well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39892 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2011, total length: 8,400 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,770 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lifting axle - Aluminum rims - Air suspension - Disc brakes = Notes = 2011 Van Hool 20FT ADR (EX/II, EX/III, FL, AT) chassis with ABS/EBS, Mercedes-Benz axles with disc brakes, lifting axle on the 1st and 2nd axles, galvanized chassis, ALCOA rims, rear entry, unladen weight: 3,300 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 5/14/9 mm; tread depth right: 5/15/6 mm), Dutch registration = Additional information = Axle configuration Tire size: 385/65-R22.5 Axle brand: Mercedes-Benz Disc Cjdpsz Iyc Aefx Aa Tehc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Aluminum rims; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 95% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 55%; Tire tread depth right: 39% Weights Unladen weight: 3,300 kg Payload: 35,700 kg GVWR: 39,000 kg Condition Technical condition: good Optical condition: good Identification Registration number: OL-88-GP Additional information Please contact Arne Honingh for further information.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 900 mm, number of axes: 3, This 3-axis ZEISS Contura 9/12/8 RDS was manufactured in 2019. It features a power rating of up to 600 VA, making it suitable for various applications. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura 9/12/8 RDS CMM machine we have for sale. Contact us for further details. Cjdpfez Iycpsx Aa Tjhc - Revision: REV 02- Electrical Phase/Supply: 1/N/PE- Voltage: 100-240 V~- Frequency: 50-60 Hz- Power Rating: max. 600 VA