Tischlerei

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Bedpfx Ajz Irfvsa Tewu Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: refurbished (used), Year of construction: 2021, operating hours: 3,821 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 928 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide transport & customs clearance ? Service & spare parts at fair prices ? Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 DrivePlus Drive type: Electric Load capacity: 2,000 kg Bodsz Irfcopfx Aa Towu Year of manufacture: 2021 Operating hours: 3,821 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Overall height: 1,400 mm Fork length: 1,200 mm Unladen weight: 928 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 DrivePlus Battery type: PzS Voltage: 24 V Battery weight: 368 kg

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 2,442 h, load capacity: 4,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: duplex, gearing type: automatic, total height: 3,200 mm, Equipment: all wheel drive, lighting, retractable fork, All-wheel drive, four-way reach truck COMBILIFT Amlat C40/18/48GPL Bedpfez Ird Sex Aa Towu Year of manufacture: 2002 According to the hour meter: 2,442 operating hours 4-tonne lifting capacity 3.20 meters stacking height 4.90 meters lifting height LPG forklift - Duplex free-lift mast - Fork adjustment - Hydraulic extension forks - Wide fork carriage - 4-way reach truck (front and side loading in one machine) - All-wheel drive - Immediately ready for operation, in original condition! - Good tires! - Simple mechanical forklift! Selling price: 11,900,-- net Affordable delivery also possible!

Condition: refurbished (used), Year of construction: 2021, operating hours: 2,804 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 927 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Bjdpfx Asz Ird Esa Towu * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High lift pallet truck ERD 220 DrivePlus Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 2,804 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Overall height: 1,400 mm Fork length: 1,200 mm Unladen weight: 927 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 DrivePlus Battery type: PzS Voltage: 24 V Battery weight: 390 kg

Condition: refurbished (used), Year of construction: 2018, operating hours: 3,885 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 570 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck ESE 120 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 3,885 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 570 kg Bwjdpjz Irdxsfx Aa Tou Load center: 600 mm Tires: Polyurethane Model type: ESE 120 Battery type: PzS Voltage: 25.6 V Battery weight: 312 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 2,945 h, load capacity: 2,000 kg, lifting height: 2,900 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,498 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 1,024 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Bedpfx Aaoz Irdro Tswu * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 DrivePlus Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 2,945 Lifting height: 2,900 mm Mast type: Triplex Free lift: Yes Overall height: 1,498 mm Fork length: 1,200 mm Unladen weight: 1,024 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 DrivePlus Battery type: PzS Voltage: 24 V Battery weight: 390 kg

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,919 h, load capacity: 2,000 kg, lifting height: 2,100 mm, load center: 595 mm, fuel type: electric, mast type: duplex, construction height: 1,526 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 928 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Bodpfx Aoz Irc Uoa Towu * Manufacturer: Jungheinrich * Type: High lift pallet truck ERD 220 * Drive type: Electric * Load capacity: 2,000 kg * Year of manufacture: 2019 * Operating hours: 2,919 * Lifting height: 2,100 mm * Mast type: Duplex * Free lift: No * Overall height: 1,526 mm * Fork length: 1,200 mm * Unladen weight: 928 kg * Load center: 595 mm * Tires: Polyurethane * Model type: ERD 220 * Battery type: PzS * Voltage: 24 V * Battery weight: 390 kg

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,544 h, load capacity: 1,000 kg, lifting height: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,750 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 553 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Bwedjz Irc Iepfx Aa Tsu Type: High-lift pallet truck EJC 110 Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2019 Operating hours: 2,544 Lifting height: 2,500 mm Mast type: Duplex Free lift: No Overall height: 1,750 mm Fork length: 1,150 mm Unladen weight: 553 kg Load center: 600 mm Tires: Polyurethane Model type: EJC 110 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 180 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,889 h, load capacity: 1,000 kg, lifting height: 2,700 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 613 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Bjdpjz Irczjfx Aa Tjwu Manufacturer: Jungheinrich Type: High lift pallet truck EJC 110 Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2021 Operating hours: 1,889 Lifting height: 2,700 mm Mast type: Duplex Free lift: No Overall height: 1,850 mm Fork length: 1,150 mm Unladen weight: 613 kg Load center: 600 mm Tires: Polyurethane Model type: EJC 110 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 160 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,031 h, load capacity: 1,000 kg, lifting height: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,750 mm, battery voltage: 25.6 V, fork length: 1,150 mm, empty load weight: 553 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * Over 400 vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: High-lift pallet truck EJC 110 Bsdpfx Aaoz Ircuo Tjwu Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2019 Operating hours: 1,031 Lifting height: 2,500 mm Mast type: Duplex Free lift: No Overall height: 1,750 mm Fork length: 1,150 mm Unladen weight: 553 kg Load center: 600 mm Tires: Polyurethane Model type: EJC 110 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 180 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2018, operating hours: 2,468 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 737 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: High lift pallet truck EJD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 2,468 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 737 kg Load center: 600 mm Tires: Polyurethane Model type: EJD 220 Battery type: PzS Voltage: 24 V Bedpfxez Ircno Aa Tjwu Battery weight: 235 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: ZCFA71EJ302677094, mileage: 512,164 km, first registration: 01/2018, fuel type: diesel, tire size: 265/70R19,5, axle configuration: 2 axles, wheelbase: 4,185 mm, fuel: diesel, energy efficiency: C, color: white, gearing type: automatic, suspension: steel-air, number of seats: 3, cooling unit manufacturer: THERMO KING, cooling unit model: V-800 MAX, Year of construction: 2018, 2018 REFRIGERATED TRUCK, equipped with a 1,500 kg DHOLLANDIA retractable tail lift and a THERMO KING V-800 MAX refrigeration unit, with pneumatic rear suspension. Bwsdpez Ircbsfx Aa Tju

Condition: used, ROLLING MILL YOM: 2004, Re-Commissioning 2021 ROLL DIMENSION Roll Dimensions BU Roll – 480 mm Dia x 460mm Face Work Roll – 150mm Dia x 420 Face Speed: max. 700 M/min Back Up Roll Driven Main mill drive: 553 Kw DC Strip thickness range: 3mm – 0.07mm Strip width range: 250mm – 350mm Roll change station Rolling force: 2500KN Max. Strip tension: Gear 1: 320 – 3200kp Gear 2: 160 – 1600kp Max. coil weight: 5 tons Max. coil OD: 1600mm Coil ID: 400/500mm Controls: SPS S7 400 Shape control Bsdpfxsz Irb Ds Aa Tswu Roll bending AGC Fume exhaust system PAY-OFF Ground level “L” shape coil car with hold down arm Uncoiler with snubber roll arm Uncoiler drive: Hydraulic motor Seekamp edge control unit 3-roll leveler stand with Peeler table + snubber roll, side guides and hydraulic strip clamp – NEW 2007 LEFT & RIGHT WINDERS Winder drive: 220kW DC (ea) Coil Stand / In-ground coil car Winder with hold down arm Vollmer shape roll with analog VMF 2000 Thickness measurement: Vollmer contact gauge + laser gauge Oil separation: 2 sets of rubbers + 1 set of oil separation rolls (felt) Edge guides + strip clamp 3x Metal oil separation rolls Oil filtration: Manufacturer: Achenbach Buschhuetten Type: Superstack YOM: 2003 Mounted production floor level

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Bedez Irbqopfx Aa Tjwu Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw Bsdpez Irbksfx Aa Tjwu - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 13289, table bore: 400 mm, overall weight: 10,000 kg, input frequency: 50 Hz, input current: 72 A, workpiece diameter (max.): 650 mm, spindle speed (max.): 10 rpm, The DC 600 gear shaping machine is the ideal solution for producing large-scale internal and external straight spur gears, thanks to its extended capacity and robust structure. The CNC-controlled automatic cutter positioning feature allows for rapid setup and reduced cycle times by limiting the total cutter stroke to the minimum required. The zero center distance between the workpiece table axis and the cutter spindle axis allows for the processing of a wide range of workpiece diameters, from medium-large to small. It adapts perfectly to both diversified and dedicated production, including robot automation for unmanned operation. Bwjdez Irbdepfx Aa Tou

Condition: excellent (used), The following HWR components are for sale, among others: Chuck jaws and centering devices • 1 INOFlex VL120, 4-jaw manual chuck, Ø 1,150 mm, Art.-No. 846120 • 1 INOFlex VL060, 4-jaw manual chuck, Ø 600 mm, Art.-No. 846060 • 1 INOFlex VF026, self-centering 4-jaw centering device, Ø 260 mm, Art.-No. 842026 INOZet pivoting bridges • 1 set WT063-4-WV25, clamping range Ø 270–630 mm, Art.-No. 750180 • 1 set WT120-4-WV83, clamping range Ø 600–1,200 mm, Art.-No. 750181 • 1 set WT063-4-WV24, clamping range Ø 182–630 mm, Art.-No. 750179 Gripper jaws and adapter jaws • VR16, reversible gripper jaws for VL060/VL070/VL080, Art.-No. 850016 • VP17, soft adapter jaws, Art.-No. 851017 • WR16-8, reversible gripper jaws for INOZet pivoting bridges, Art.-No. 760162 • WP16-8, soft adapter jaws, Art.-No. 770117 • WP25-8, soft adapter jaws, Art.-No. 770126 • VR12, reversible gripper jaws for VF026, Art.-No. 850012 Movable jaws and fixed stops • VCF120, fixed stops, Art.-No. 854016 • VCB120, movable jaws, Art.-No. 854018 • VCF070, fixed stops, Art.-No. 854006 • VCB070, movable jaws, Art.-No. 854007 • VCB026, movable jaws, Art.-No. 854019 • VCF026, fixed stop jaws, Art.-No. 854020 • VCB028, movable jaws, Art.-No. 854029 • VCG026, movable, reversible jaws with gearing, Art.-No. 854033 In addition, various related T- and double T-slot nuts, fastening screws, and other accessories are available. Total net new price: 117,000 EUR Bedpfsz Ira Tex Aa Tewu Purchases were made in 2021 and 2023. The attached images provide an initial overview of the available components.

Condition: excellent (used), mileage: 83,230 km, power: 330 kW (448.67 HP), first registration: 07/2024, wheelbase: 3,800 mm, fuel tank capacity: 845 l, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2024, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, seat heater, soot filter, spoiler, traction control, = Additional options and accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof cover - Roof spoiler - Transparent mast - Remote central locking - High beam headlights - Windshield - Enclosed cab - Speed limiter - Interior lights - Cab - Refrigerator/cooling drawer - Air suspension - Air-suspended seats - Metallic paint - Motorcycle cover - MX engine brake - Parabolic suspension - Particulate filter Bsdpfx Aaoz Ira Ho Towu - Radio/CD player - Radio/cassette player - Rearview camera - Disc brakes - Sunroof - Sleeper cab - Hose assemblies - Side skirts - Seat heating - Sun visor - Voice control - Lane keeping assist - Stability control - Stand-alone air conditioning - Blind spot camera - Auxiliary heating system - Central lubrication system - Device transfer = Further information = Transmission: 12T2210, automatic Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,494 kg Payload: 13,006 kg GVW: 20,500 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 470 mm, spindle bore: 150 mm, turning diameter over bed slide: 750 mm, turning diameter over top slide: 470 mm, feed length Z-axis: 2,000 mm, spindle speed (max.): 1,030 rpm, Center height on the machine bed: 360 mm Width of the machine bed: 450 mm Width of the recess: 450 mm Maximum turning diameter on the machine bed: 750 mm Maximum turning diameter on the recess: 910 mm Maximum turning diameter on the carriage: 470 mm Bwodpfx Aasz Irayo Tju Spindle bore diameter: 150 mm

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Bjdpez Iq U Nefx Aa Tjwu Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. Bedpfx Aez Iq Uvoa Tewu The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Year of construction: 2019, condition: new, functionality: fully functional, machine/vehicle number: G11SI19032736936, This is a combination steam oven, model SCC 101 WE, in gas-powered version, from the premium manufacturer Rational, NEW, ORIGINAL PACKAGED, from stock, year of manufacture 2019. It is a unit from the highly sought-after SCC series with triple-pane glass and LED lighting. The combination steam oven has been inspected in our in-house workshop, and its new condition has been confirmed. Dealer's recommended retail price (RRP) €17,695.30 gross, equivalent to €14,870 net. Our price: €7,735 gross, equivalent to €6,500 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steam oven offers space for 10 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the quantity to be cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 1042 mm Power connection: V: 230 Gas connection: 22.0 kW / Natural gas (G20) Serial number: G11SI19032736936 Weight: approx. 152 kg Capacity: 10 x 1/1 GN Longitudinal insert: 1/1, 1/2, 2/3, 1/3, 2/8 GN Year of manufacture: 2019 Condition: NEW, ORIGINAL PACKAGED Further details: In combination steam oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature sensor. Handheld spray gun with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time setting. 7 cleaning levels for unattended cleaning - even overnight. Moistening can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable proofing levels. USB interface. Joint-free, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Bwodez Iq Upspfx Aa Tsu Do you have any questions, would you like to request advice, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is made exclusively according to our general terms and conditions.

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW Bjdpfx Aoz Iq Ucoa Tewu • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. Bedpfoz Iq T Eex Aa Tewu *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Bedpfx Aajz Iq Trj Tswu Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible