Rehnen GmbH & Co KG

Condition: not inspected (used), For swaging the louvre ends in shutter manufacturing. Bljdpfx Aoxuf Rbebcep

Condition: good (used), Code: 0413 Brand: STEMAS - ITALY Model: PAF - CE Standard Automatic electronic 6-group sanding machine for edges, for panels, on flat and shaped edges, solid, veneered, unfinished, painted, profiles, funeral caskets, frames and various - CE Standard Technical data: Working height min/max mm 15/100 Working length min mm 200 Feed on track Electronically controlled infeed guide Carpet with speed variator 6/30 mt/min Bljdpfx Aextnc Dobcjp Electronic pressure group lifting Panel support with electronic positioning Feed on track with rubber pads and adjustable rubber pressure wheels 1° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 4 (Kw 3) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Belt cleaning blower - Suction mouth diameter mm 150 2° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 3° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 4° Group oscillating sander - Pneumatic pad - Motor Hp 2 (Kw 1,5) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 5° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 6° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 Max pressure 10 atm Additional rollers Set of belts Overall dimensions: Machine mm 7400 x 2200 x 1700 h Electrical cabinet mm 1200 x 600 x 2200 h

Condition: excellent (used), Edge Sander Samco Unilev 200 Sanding height: 200 mm Bsdpoxtambjfx Abcslp Two belt speeds Adjustable shoe Table adjustable from 0–30 degrees Adjustable sanding height Pneumatic sanding belt tensioning Sanding belt oscillation Additional units adjustable at an angle Motor power: 2/3 kW

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - Fuse: 32A - Consumption: 14 kVA - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No Bedpfsxtakmox Abcslp - Location: at the Blomberg warehouse

Condition: new, Year of construction: 2025, functionality: fully functional, with integrated conveyor feed infinitely variable feed speed top pressure rollers veneer edge sanding device oscillation tiltable up to 45°, motorized adjustment sanding unit motorized height adjustable by 120 mm mitre fence with scale optionally with auxiliary table, semicircular table, chassis, table extension Bodpfxjxr Nxwo Abcelp

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Sanding belt oscillation Bledpfx Abjxr Dfljcep

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Bjdsxrz Nbepfx Abcjlp Number: 29 Year of construction: 2003 kW: 4 RPM: 1500

Condition: good (used), Year of construction: 2014, Drive 1.5 kW Belt speed 16 m/sec Belt width 150 mm Belt length 2270 mm Bjdpfx Aoxqy S Sobcelp Table size 680 x 310 mm Required space approx. 1350 x 600 mm Weight approx. 162 kg Extraction ports 2 x 100 mm All information has been taken from a brochure, therefore provided without guarantee. Technical data on request – see images for equipment details.

Condition: used, This Holzkraft edge sanding machine, model: KSO 1500, is being auctioned online as part of our industrial auction / machinery auction for the liquidation of the Holzbau Hahn site – Hundegger processing line – woodworking machines – commercial vehicles – tools – material – containers – shelving. You can find this and many other items on our platform. Bledpfx Abexqv Euecep

Condition: excellent (used), Stemas edge sander 2 x sanding units with spring-loaded shoes Interchangeable profile pads 1 x sanding unit Adjustment of units in two axes + angle adjustment Bledpoxp I Aiefx Abcjp Oscillation Stepless feed speed adjustment with variator

Condition: excellent (used), Sanding belt width: 200 mm Variable belt speed control Dimensions of fixed worktable: 1000x400 mm Dimensions of tilting worktable: 1000x350 mm Mechanical oscillation Power supply: 380 V Motor speed: 1450 rpm Motor power: 3 kW Weight: 550 kg Bjdpfx Abjxnyz Ujcjlp Year: 2007

Condition: excellent (used), Year of construction: 2019, Edge sander for MDF fronts, manufacturer STYL24, model SKI1 Bsdpfx Aoxmh S Esbcjlp The machine includes: sanding belt section, sanding shoe, edge milling unit, section for sanding J profile, unit for chamfering the bottom edge, and a material blow-off section. The machine is ready for operation.

Condition: excellent (used), Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Blsdpfsxmgrqsx Abcep Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 1,750 kg, power: 13 kW (17.68 HP), The grinder is in perfect condition, fully functional, and has been used very little. Ready for immediate pickup. Bsdpfjxl Hw Dox Abcelp

Condition: excellent (used), functionality: fully functional, total length: 1,440 mm, total width: 720 mm, total height: 1,470 mm, table height: 840 mm, SAMCO Unilev150 Double-Sided Edge Sander Specification: • Condition: used, after inspection • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 x 2150 mm • Two sanding belt speeds • Additional shaft, roller for sanding internal curves • Table dimensions: 22 x 144 cm • One table adjustable in the range of 0-30 degrees Bledpfx Abexl D Nwscop • Motor power: 3.0 kW • Pneumatic belt tensioning and oscillation • Adjustable shoe for veneer sanding on one side and "back" 15x75 cm on the other • Angle sanding attachment • Extraction port - diameter 140 mm • Weight: approx. 450 kg • Documentation for the machine in Italian • Overall dimensions: 144 x 72 x 147 cm (L x W x H) Additional information: • Very good factory technical and visual condition • The presented photos show the actual sale item • Possibility to connect and test the machine on site

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Bljdpfoxlqutjx Abcop Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Bledpfx Aboxivbmjcop

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Bljdpsxgvcxsfx Abcsp Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2020, Holzkraft edge sanding machine type: KSO 1500 with base frame Year of manufacture: 2020, in excellent condition Belt width: 150 mm Belt length: 2270 mm Veneer sanding device: no Oscillation: yes Roller diameter: 38 mm, 50 mm, 76 mm Swiveling sanding unit: yes / 90° - 0° Worktable: 680 mm x 310 mm Additional table: 260 x 260 mm Belt speed: 16 m/sec Extraction connection: 100 mm x 2 Motor power: 1.5 kW / 400V Machine length: 1350 mm Machine width: 585 mm Weight: 162 kg Bedpfexgvcfjx Abcolp Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1973, functionality: fully functional, ARMINIUS profile sanding machine type 171/2, year 1973, with 3 units. All spindles 30 mm diameter. Spindles adjustable in depth and height. 1 spindle 7900 rpm. Accessories: various profile grinding wheels, feed unit with 3 rollers. Sold without warranty. Blodpfsxgp E Hox Abcop

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Bledpoxd U Uhofx Abcjp

Condition: excellent (used), Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw Bedexd Rl Njpfx Abcjlp

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen Blodsxdc Enopfx Abcop – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: excellent (used), functionality: fully functional, TOMESANI T45/B Edge Sander Specification: • Condition – used • Manufacturer – TOMESANI • Model – T 45/B • Working height – 150 mm • Left/right rotation • Tables measuring 17 x 144 cm and 27 x 120 cm, extendable Bedpfx Abexb D Acocelp • Rotating sander body • Motor power – 2.5 HP • Mechanical belt tensioning and oscillation • Own integrated sawdust extraction • Weight – approx. 250 kg • Overall dimensions: 145 x 85 x 120 cm (L x W x H) Additional information: • Very good factory technical and visual condition • The provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on-site

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Bledpfx Abow Tfx Djcep Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim