Reitz Technik GmbH

Condition: used, Použitý Netzsch disolver model 606.70. Disolverová pila má průměr 550 mm a je poháněná elektromotorem ABB 58 kW, 380 V, 1485 ot/min, 50 Hz, EX-91.C.3460. Hydraulicky zvedané rameno, celková výška ve spodní poloze cca 2850 mm/celková výška v horní poloze cca 4350 mm. Součástí je integrované víko (průměr 1220 mm), kleštinová fixace nádob, ovládací panel a rozváděč. Specifications: Power: 58 kW Todpfexztdcox Af Nef

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel Tedpfxjxyxyts Af Nef - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor. Tsdpoxyxnwsfx Af Nof

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Tsdpexyxl Ajfx Af Nof Click on the link below to see a video of the machine running.

Condition: used, Comprehensively tested and refurbished, used Morton model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted). Specifications: Bowl Volume: 158.5 gal Motor Power: 29.5 hp Todpfx Afexyxlve Nef Material Of Construction: Stainless Steel Choppers (Y/N): N Number Of Choppers (1-10): 0 HP Of Unit: 29.502 Jacket (Y/N): Y Jacket Pressure: 5.5 Jacket Temperature: 162

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Todpfjxyxlpsx Af Njf Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: used, Used BCH stainless steel jacketed sigma mixer / extruder. Approximate working capacity 100 litre (product dependent) with maximum total capacity 250 litre. 304 Stainless steel mixing chamber measures approximately 720mm Long x 780mm Wide x 700mm Deep. Internal rated 100 mbar (90% Vacuum) design pressure at 150 deg.c. External 304 stainless steel jacket rated 6.8 bar design pressure at 170 deg.c. Has (2) 304 stainless steel Sigma blades driven by (2) 4kw motors with gearboxes. 304 Stainless steel screw discharge driven by 4kw motor with gearbox. Unit air operated hinged lid. Includes control panel. Tedsxxh Rlepfx Af Nef

Condition: used, Used NAUTAMIX Stainless steel mixer-Total volume : 5000 litre-Useful capacity : 4000 litre-Vessel Ø 2320 mm x 3500 mm-Drive =Screw geared motor : Hp 10 - Rpm 532 - 3x 400/690 volts-Arm geared motor : Hp 2 - Rpm 25 - 3x 230/400 volts-Without drain valve-Without electric control panel-Without frame Tsdpjxxh Iwjfx Af Nef

Condition: used, Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production. Specifications: Todpexw Tgcefx Af Nef Power: 15 kW

Condition: used, Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPa*s. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in food production. Todpfjxw Tf Sjx Af Nof

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Tedpfjxw Tdzox Af Nof

Condition: used, Comprehensively tested, used Gardner type approximately 400 litre working capacity (product dependent) stainless steel ribbon blender. Trough measures approximately 1650mm long x 550mm wide x 700mm deep. Unit has a stainless steel lid and includes a bottom discharge valve. Specifications: Capacity: 14.1 ft³ Material of construction: stainless steel Width: 21.65" Length: 64.96" Dimensions: 64.96 x 21.65 x 27.56 Tedpfx Aoxw Tdbef Nof

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 3 Todpjxw Tc Dsfx Af Njf Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158

Condition: refurbished (used), Year of construction: 2015, BOHLE Vagumator® VMA 300 V batch granulator This intensive mixer-granulator is designed for the production of wet granulate with subsequent vacuum drying in batch sizes of 40–130 kg. In 2010, a HYFRA VWK 70/1-S cold water treatment unit was retrofitted for the vacuum condenser, with a cooling capacity of 6.6 kW at 32°C. In 2015, the entire machine and process control system was replaced. In 2015, two Single Advanced N1-90-18-80 temperature control units were installed, each with a heating capacity of 18 kW and a cooling capacity of 80 kW for water up to a maximum temperature of 90°C. Tjdpfx Afjxvzblo Nsf Manufacturer: L.B. Bohle

Condition: used, Used 3C vacuum dissolver mixer 120 litre double jacket Material : Stainless steel Motor : 3 kw - Hp 4- Rpm 1420 - 3x 220/380 volts Electrical heating 3x 3 kw Useful capacity : 120 litre Agitator : dissolver Ø 120 mm Conical vessel Ø 600 x 200 mm - Height: 750 mm Equipped with: - 1 vacuum pump 0.37 kw - 1 double-jacket fluid circulation pump 0.26 kw - 1 circulation pump for the mechanical seal 0.5 kw Tsdoxvqlgspfx Af Nof

Condition: used, Used SILVERSON stainless steel in-line mixer Type 450L No: C450L M642 7.5 hp – 3x 220/380 volts Tedpfx Afjxvqlaj Nof

Condition: used, Used OLSA stainless steel vacuum mixer Type speedycream 1000 Capacity : 1000 litre Double jacket Agitators : anchor, frame, scraper, emulsifier Control : hydraulic unit Todsxvqk Nepfx Af Nef Motor : 18.5 kw - Hp 25 – Rpm 1465 – 3x 400/690 volts Liquid ring vacuum pump

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included. Tsdpfsxvqkvsx Af Nef Specifications: Power: 45 kW Style Blades: butterfly / tri-foil agitator

Condition: used, Used Zanchetta model Rotolab stainless steel mixer granulator. Total bowl capacity 2.8 litre, working capacity approx. 1.6 litre. Has jacketed bowl with inside dimensions 160 mm diameter x 140 mm height. Main impeller rotation speed 120 - 1200 rpm driven by electric motor. Chopper blade rotation speed 6000 rpm driven by electric motor. Includes local control panel and integrated switchboard, connection for vacuum and nitrogen (.). Tsdpfx Afoxvqkcs Njf

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Tsdpfx Afoxvqilo Nof Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25.

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. Tjdpfxoxvqh Us Af Nsf A video of this mixer is available below. Specifications: Bowl Volume: 105 gal Motor Power: 11 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Reportedly unused since refurbishment, Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts are made from 316/316L stainless steel. Approximate capacity 27 to 36 litres working capacity (product dependent). Two 316/316L stainless steel z-blades driven by a 4 kW, 3 phase/50 Hz, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum-rated hood/lid with clamps. External 304/304L stainless steel jacket rated for 3.5 bar working pressure at 150°C. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Comes with control panel for mixer and chiller operation. Tsdpfxoxvqh Ij Af Nsf

Condition: new, Nieużywany pionowy zbiornik procesowy produkcji Joshua Greaves wykonany ze stali kwasoodpornej. Pojemność robocza 1000 l. Górna dennica elipsoidalna, przykręcana na śruby, dolna dennica elipsoidalna, spawana. Zbiornik jest przeznaczony do pracy na ciśnieniu atmosferycznym i temperaturze do 80 C. Zewnętrzny płaszcz grzewczy wykonany ze stali ko, przeznaczony do pracy na ciśnieniu do 3.5 bar i temperaturze do 80 C. Zbiornik jest wyposażony w dwa mieszadła montowane od góry - mieszadło kotwicowe, napędzane przez przekładnię silnikiem el 1.5 kW, 1461 obr/min, oraz zamontowane pod skosem mieszadło szybkoobrotowe, napędzane bezpośrednio silnikiem el. 7.5 kW 2890 obr/min. Zbiornik posiada dodatkowe wyposażenie: 1 szt chłodziarka do wody produkcji ICS Cool Energy iC 220 50 Hz Tsdpfxjxt Rqwe Af Nof 1 szt chłodziarka do wody produkcji ICS Cool Energy i-Temp ci 90t9 50 Hz. 1 sztuka pompa krzywkowa produkcji Alfa Laval Zbiornik jest zamontowany na 4 nogach ze stali kwasoodpornej.

Condition: used, Używany mieszalnik procesowy produkcji Winkworth model PV65-25 o pojemności 65 litrów wykonany ze stali kwasoodpornej. Urządzenie posiada przyspawaną dennice dolną oraz płaską górę z ręcznie otwieraną pokrywą. Góra jest podnoszenia i opuszczania przez pneumatycznie sterowany mechanizm. Wymiary komory mieszającej to około 600 mm średnicy i 450 mm głębokości. Komora mieszająca posiada zewnętrzny płaszcz ze stali kwasoodpornej zaprojektowany na ciśnienie 3,5 bara i temperaturę 200°C. Mieszalnik wyposażony jest w od górnie montowane mieszadło ramowe ze skrobakami teflonowymi napędzane przez przekładnie silnikiem elektrycznym o mocy 1,1 kW, obroty mieszadła to 33,6 obr./min oraz przeciwbieżne mieszadło łopatowe napędzane przez przekładnie silnikiem elektrycznym o mocy 0,75 kW, obroty mieszadła to 76,4 obr./min. Urządzenie posiada również zamontowany w dennicy dolnej homogenizatora produkcji Silverson typ BE275 z głowicą rozdrabniającą o kwadratowych otworach napędzany silnikiem elektrycznym o mocy 0,75 kW. Jednostka wyposażona jest w lokalny panel sterowania i zamontowana na podeście z czterema nogami. Todpfx Asxt Rqqof Nof

Condition: used, Used HAAGEN and RINAU stainless steel mixer with heating electric-Type RUVI200-Total capacity : 300 litre-Useful capacity : 200 litre-Agitation 1 paddle - 2 scraper arms-Vessel Ø 900 mm x Average height 510 mm-2 motors-Double jacket with electric heating 2 x 9 kw-With electric cabinet Tjdpfx Aext Ei Uof Nof