Resch Metall-Design

Condition: used, Year of construction: 2011, x-travel 2.000 mm y-travel 1.300 mm z-travel 1.300 mm Control Heidenhain iTNC 530 spindle tunring speed 6.000 U/min tool taper SK 50 number of tool places 12 Pos. Nsdeyxr Nhspfx Af Tewd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dual drive for the Z-axis - Chip conveyor - Internal coolant system Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Nsdsyxn Nqepfx Af Tswd

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units Njdpfjyxhztox Af Tjwd • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining Nodpfxsyxhzao Af Tswd • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Nwedpfxsyxhyvj Af Ted Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: new, Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm Nedpfxjyxhycj Af Tewd • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine Nwedpfxjyxhx Es Af Tod • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,147 h, functionality: unexamined, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 880 mm Travel Z-axis: 800 mm MACHINE DETAILS Control: HEIDENHAIN Operating hours Machine hours: 93,440 h Spindle hours: 51,147 h Nwedpfoyxc Etox Af Ted EQUIPMENT Tool changer Chip conveyor

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1800/2000/1100 mm Tool holder : HSK 100 In General: Year of manufacture:2007 Control system:Heidenhain iTNC 530 Travel distances X/Y/Z:1,800/2,000/1,100 mm Rotational speed:12,000 rpm Media feed-through:Blast air + cooling lubricant Spindle: Technology:Motor spindle Speed:12,000 rpm Power:44 kW Torque:288 Nm Tool holder:HSK 100 NC swivel head: Technology:Universal milling head B-axis:0°-180° NC rotary table: Technology:Rotary table with pallet carrier C-axis:360° Clamping surface:1,600 x 1,400 mm Max. table load:4,000 kg Holding torque:approx. 17,000 Nm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct scales in all axes Chip disposal:Chip conveyor Coolant supply:Internal c oolant system, 40 bar Automation:2-fold pallet changer Workpiece measurement:Heidenhain touch probe Tool measurement:Blum Laser NT Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Emulsion mist separator:Mechanical Nwedpjyw Dngefx Af Tsd

Condition: used, Year of construction: 2002, Machining center Deckel Maho DMU200P incl. three manufactured pallets for quick setup - Available Immediately - Worldwide Export Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12.000 U/min Spindle mount: SK50 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar chip conveyor: . probe: Heidenhain TS642 electric handwheel: Heidenhain operating mode: 4 High-speed spindle attachment: 42.000 U/min Tool measurement: Blum Laser automatic swivel milling head: B-axis NC rotary table: C-axis Nwodpfoywul Nsx Af Tsd 3-D Quickset: , Tools: 60 x SK50

Condition: used, Year of construction: 2019, For sale is a DMU125P duoBlock in like-new condition! The machine ran for only about 3,500 hours. - Immediately available - Worldwide Export Installation plans/transport data see photos. Construction year: 2019 Control: Heidenhain TNC640 Travel: X-1.250 mm, Y-1.250 mm, Z-1.000 mm table size: 1.250 x 1100 mm max. table load: 2.800 kg Nwodpfx Aeywuklof Tjd Milling head: A-axis -125 / + 35° x table: NC rotary table Spindle mount: HSK-A63 Spindle speed: max. 15,000 rpm tool magazine: 63 places Internal coolant supply (IKZ): 80 bar, frequency-controlled, suction, cooling device Blasluft probe: Heidenhain Measuring: 3D quickSET operating mode: 4 electric handwheel: Heidenhain Machine monitoring: MPC Machine Protection Control Linear axes X/Y/Z Rapid traverse speed: 60 m/min machine weight: 27.000 kg

Condition: used, Year of construction: 2010, operating hours: 20,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel paths X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 40 positions • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large work area diameter 2400 mm • Incl. cleaning gun • Short delivery time, subject to prior sale Nwsdpfx Afjywlk Ne Tjd

Condition: used, Year of construction: 2014, In excellent condition, ready to use immediately Nwjdpeywhd Eofx Af Ted

Condition: good (used), Year of construction: 1985, Machine is in good working condition. Nwsdpfsyvt Rhox Af Tjd X axis travel - 4000mm Parts shown by hand not come.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Nsdpfxeyu Twkj Af Tewd

Condition: good (used), Year of construction: 2006, Vertical Machining Center Machine type: DMG DMC 1035 V Control system: Heidenhain iTNC 530 Year of manufacture: 2006 TECHNICAL DATA: Travel paths: X-axis: 1,035 mm Y-axis: 560 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 30 m/min Speed range: 10,000 rpm Spindle motor: 13 kW Tool holder: SK 40 Tool changer Tool positions: 20 Table size: 1,200 x 560 mm Nodpfx Asyu S Rpef Tjwd Machine weight: 5,500 kg Equipment features: Chip conveyor Electronic handwheel Linear measuring systems on all 3 axes Electronic handwheel Interface: 4th axis Touch probe Operating mode: 4

Condition: excellent (used), Year of construction: 2012, New main spindle August 2025 x1000 mm x y1100 mm x z810 mm Milling spindle max. 3,000 or 18,000 rpm DDT spindle NC swivel head A-axis (0-180°) Main spindle motor power 38 kW Max. torque (40%/100% duty cycle): 135 Nm / 105 Nm NC rotary table diameter 1000 x 800 mm, C-axis 360° Max. workpiece weight 1,000 kg Control: Heidenhain iTNC 530 Njdpfx Afsyu I Rre Tewd HSK 63-A Tool changer – 273 positions Through-spindle coolant (IKZ) Chip conveyor with paper band filtration system Electronic handwheel Coolant mist extraction Heidenhain DCM collision monitoring (machine and tool) Feed rate (linear): 60,000 mm/min Machine weight: 17,000 kg Connected load: 86.00 kVA

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Nwedpoyuufisfx Af Ted Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: used, Year of construction: 2006, x-travel 1.250 mm Nedpfx Afoyui Nce Towd y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B - axis -30 - +180 ° tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 560 mm z-travel 560 mm table surface area 500x400 mm control Siemens type 840 D Nwodpfx Aoyt Rw Sef Tod spindle taper ISO 40 spindle turning speed range 8000 U/min type of pallet-changer 2 Rotary table 360 ° Tool changer 40 weight of the machine ca. 11,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, controller model: 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition. 5-axis simultaneous machining. Rotary table: 1700 mm. Table load capacity: 6 to 9 tons. Spindle hours: 9000 h. Nwodpjytt Elefx Af Tjd

Condition: used, Year of construction: 2016, Technical details: travel: 1300 mm length: 670 mm width: 625 mm control: Heidenhain TNC 620 spindle turning speed range: 12000 1/min table load: 1300 kg tool change unit: 40 Pos. spindle taper ISO: SK 40 spindle: 17 / 10 kW dimensions of the machine ca.: 3,35 x 2,60 x 3,10 m weight: 8,5 t : 40 kVA rapid traverse: 36 / 36 / 30 m/min vertical machining center, touch probe RENISHAW OMP 40-2, coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle, el. handwheel, oil-mist suction, chipconveyor, flush gun, approx. 13.000h "machine on", approx. 3.000h "spindle on" Nsdpfx Afoytrw Hs Tswd inspection under power in factory is still possible *

Condition: ready for operation (used), Year of construction: 1998, operating hours: 85,078 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 130 Nm, controller manufacturer: Heidenhain, controller model: TNC426, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, DMG125P, Heidenhain 426, SK40, 60 tool magazine positions, rotary table with T-slots, swiveling head, spindle new in 2025 Nwedoytrldepfx Af Tsd

Condition: used, Year of construction: 2005, Technical details: x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm tool taper: SK 40 table clamping surface:: 1200 x 600 mm max table load: 1000 / 350 kg Njdpfxoytqdfj Af Tswd tool magazin:: 30 Pl. speeds:: 12.000 U/min : 600x480 mm total power requirement: 18 kW weight of the machine ca.: 11 t

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 96 kVA, controller model: Heidenhain, workpiece length (max.): 4,200 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Centre DMG DMF 360L Travel paths: X: 3,600 mm Y: 920 mm Z: 820 mm Nwjdsytp Shepfx Af Tsd Vertical swivel head, B-axis Spindle: SK40 Spindle speed: 18,000 rpm Pendulum machining with partition wall Chip conveyor 40 bar coolant pump Coolant system incl. paper band filter Tool changer: magazine with 30 positions Control: Heidenhain TNC530 Electronic handwheel 10x SK40 tool holders available on request. Documentation and export possible at extra cost. Machine can be inspected under power. We are happy to send you further details or arrange an on-site inspection.