Fritz

Condition: used, Technical specifications: Spindle diameter: 50 mm Bodpfx Abezilqwe Njdd Replaceable spindle Spindle speed: 3/4.5/6/9 thousand RPM Spindle adjustment: up/down Starting method: star/delta Rotation direction: left/right Power supply: 380 V

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Width: 1070 mm Bodpfx Aszilp Hjb Nedd Height: 1040 mm

Condition: excellent (used), Catalogue number 7882 Bdodpfxszh Hz Ue Ab Ned TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 200 mm - Interchangeable spindle - Spindle lock - Height adjustable (up/down) - Cast iron fence with full adjustment - 3 spindle speeds + clockwise/counterclockwise rotation - Table dimensions: 1000 x 950 mm - Cast iron table - With side carriage: 1100 x 330 mm - Clamping device - Motor power: 3.7 kW - Brake - Extraction port diameter: 120 mm - Dimensions (L/W/H): 1750 x 1400 x 1250 mm - Weight: 683 kg ADVANTAGES – German-made – With side carriage – Used spindle moulder – In very good condition Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Net price: 6,900 PLN Bjdpfx Abozh Hy Ds Nsdd Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. Bjdpszhn Shsfx Ab Nodd For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Excellent for learning woodturning. Suitable for both small and large bowls.

Condition: good (used), Year of construction: 1991, Table saw Bjdpfjzhlrrjx Ab Njdd Manufacturer: SCM Type: T 130 Year of manufacture: 1991 Table: 1200 x 730 mm Power: 4 kW Spindle: 30 mm Reversible rotation Including feed mechanism

Condition: good (used), Year of construction: 1979, Table dimensions 1100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm reus 4 U/min Weight 850 kg Bdedpozhcg Tsfx Ab Nsd Year 1979

Condition: used, Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t DK, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. Bjdpezg E E Njfx Ab Nedd 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with automatic tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drillings. The tables can be coupled to process larger components. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t, portal design with two tables for alternating operation. Year of construction: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, V-CNC card, memory approx. 8 MB, in the integrated PC. • Portable control panel BWO Vektor MP (mobile panel), with stand. Technical data: Working areas / cubic dimensions: for tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 196° (+/- 98°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 high-speed milling spindle HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 1,500 x 1,500 mm with grid drilling. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 manually operated swing doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected. Bdsdpezg Efpofx Ab Ned

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Bdodpozgtyhefx Ab Nod Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling heads: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8579 Bedpfx Aezf H R Rob Nsdd

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Bdjdpfezf H Nysx Ab Nod Number of milling heads: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8578

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! Bsdjzf H Iispfx Ab Nsdd TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Location: Nattheim. Bedpfszd Tg Ajx Ab Nsdd

Condition: used, Rotary milling cutter with 3-roller feed mechanism. Location: Nattheim. Bdsdpfx Ajzd Tgvsb Nsd

Condition: used, completely shut down used good condition cleaned function tested partially refurbished Manufacturer: Flottjet GS-tested kW: 2.2 Number of spindles: 1 Spindle diameter mm: 30mm Maximum tool diameter in the machine mm: 125 Bdedpfx Aozd Hdheb Ned Table size l x w mm: 650 Table extension approx. mm: 2 x 300 Milling fence with fine adjustment Space required approx. L x W x H mm: 1260x500x1100 Weight approx. kg: 110 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty.

Condition: used, Technical specifications: Spindle diameter: 35 mm Bjdszd Etuepfx Ab Njdd Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Manual spindle height adjustment Manual spindle angle adjustment in the range of -5/+40 degrees Left/right rotation Spindle lock Dust extraction port diameter: 140/100 mm Work table dimensions: 850/1190 x 2500 mm Adjustable support arms Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 2600 mm Width: 1200/1540 mm Height: 1100 mm

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg Bdedpfxjzdz I Ue Ab Nod ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Bedpfjzdzbuex Ab Nodd Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Bedpfxezdzbze Ab Nsdd Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg Bdodezdzb Ijpfx Ab Ned

Condition: used, Direction of rotation L / R Spindle diameter 30 mm Bodpozcq A Tjfx Ab Nsdd Motor output 3 kW A Bäuerle SFM-type rigid table router or rigid router for profiling and routing wood.

Condition: like new (used), Code: 0406 Brand: SCM MINIMAX Model: T55 ES - CE Standard Bsdezcqrnopfx Ab Nedd Spindle moulder with long table for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics, composite materials and various – CE Standard – Year 2023 Technical specifications: Shaft diameter 35 mm Shaft length 125 mm Shaft rotation speed rpm 3500/6000/8000/10000 Max tool diameter 240 mm Motor power 6,6 Hp Spindle unit adjustment handwheels positioned on the front of the machine Gravity indicator on the spindle lifting handwheel Side extensions and telescopic front roller extension for a support of 2500 mm Spindle rotation reversal Spindle speed display by LED lights Adjustable spindle guide Electrical installation for automatic feed Extraction hood inlet diameter 120 mm Overall dimensions mm 2550 x 900 x 1150 h Weight kg 348

Condition: new, "New & Unused" A true collector's item for woodworkers: Scheppach HF 3000 spindle moulder in unused, mint condition! Here is a rare opportunity to purchase a legendary Scheppach HF 3000 spindle moulder in absolutely original, mint condition. The Scheppach HF 3000 is a robust, stationary spindle moulder designed for woodworking shops; it is primarily used in semi-professional DIY and trade settings. Bsdozcqarepfx Ab Nodd Technical specifications at a glance Spindle diameter: 30 mm (standard size for professional cutter heads) Spindle speed: Adjustable in steps (3,000 / 6,000 / 8,200 or 9,000 rpm) Max. tool diameter: 200 mm Spindle height adjustment: Up to 100 mm Weight: Approx. 120 kg (ensures low-vibration stability) Dust extraction port: 100 mm diameter (compatible with standard workshop extraction systems) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation - Table dimensions: 1060 x 770 mm - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES Bjdpfx Absza D N Uj Nedd – German-made – Used milling machine – Very good condition Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)