Band slicer

Urschel OV

Condition: defective spare-parts repository (used), Urschel OV slicer Height: 1600 mm Bodpfxey Amw Io Adqolk Width: 850 mm Length: 1800 mm Power supply: 400V 50Hz 3N Power: 2.2 kW

Year of construction: 2005, condition: good (used), Machine is in good working condition. Machine equiped with sensor for reckogmize marker on foil. Bsdpfey Txn Tjx Adqolk

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) Blodpfxsw R T Die Adqjk The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: like new (used), ASEPTIC POUCH FILLER WITH DOUBLE 1" FILLING HEAD The aseptic filler is a machine designed to fill pre-sterilized flexible containers with a pressure cap under aseptic conditions (i.e., absence of bacteria). Prepared for filling 200L and 1000L drums. * Production capacity may vary depending on format and product to be filled. INCLUDES: Bjdpfxox S Hq Tj Adqolk - Infeed and outfeed aseptic drum roller conveyor. - Internal electrical panel. - Touch screen. - Hydraulic equipment.

Year of construction: 2006, condition: good (used), FAM Mantis Belt slicer 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph Bodsy R El Tepfx Adqjlk

Condition: used, Sormac PO-30 Pepper Decoring, Slicing & Wedging Line Complete Sormac pepper processing line equipped with 4 × Sormac PO-30 pepper coring machines for the automatic coring and processing of bell peppers. This high-performance processing line is designed to deliver high throughput and consistent product quality for the fresh produce and food processing industries. The PO-30 coring machines accurately remove the core and seed membranes, while an integrated vacuum system efficiently extracts seeds and seed residues, ensuring a clean finished product with minimal product loss. The line is equipped with infeed and outfeed conveyors, providing a continuous and efficient product flow. It is suitable for processing red, yellow, green, and orange bell peppers, making it ideal for the production of fresh-cut vegetables, vegetable mixes, meal components, and convenience foods. Thanks to its stainless steel construction, the installation is hygienic, durable, and easy to clean, making it perfectly suited for modern food processing facilities. This used Sormac processing line is an excellent solution for companies looking to increase production capacity or automate their bell pepper processing. The combination of four PO-30 coring machines provides high processing speeds, reliable performance, and an efficient production process. The line is currently disassembled. Bljdpfx Aezkb Twsdqsk The line consists of: Infeed conveyor with cleats – dimensions (W × L): 600 × 3,500 mm Distribution conveyor with 4 pneumatic diverter valves – dimensions (W × L): 600 × 9,250 mm 4 × Sormac PO-30 coring machines Finished product outfeed conveyor – dimensions (W × L): 600 × 10,500 mm 4 × vacuum units with waste discharge conveyor – dimensions (W × L): 400 × 9,000 mm Central electrical control cabinet Operating principle of the PO-30 coring machine Station 1: The pepper stem is cut off. Station 2: The pepper is cored, and the seeds are removed. Station 3 (optional): The top, the bottom, or both ends of the pepper are cut off simultaneously. Station 4 (optional): The pepper is segmented into 4 pieces. After machine modification, segmentation into 2, 3, 6, or 16 pieces is also possible. Technical Specifications Production capacity: Up to 11,200 peppers/hour (depending on product, quality, and operator) Product diameter: 60–115 mm Product length: 70–140 mm Functions: Coring, cutting, segmenting Power supply: 400 V (3 + N, 50 Hz) Power consumption: 6 kW Year of manufacture: 2020 Compressed air requirement: 6 bar (1,600 L/min) Overall dimensions (W × D × H): 15,000 × 4,000 × 3,000 mm

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold Bodozka Rujpfx Adqslk The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: ✅ Preform feeder Bsdpfjzd Sb Ssx Adqjlk ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.