Frequency converter Toshiba VF-SX

Toshiba VF-SX

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Kodevv H T Rjpfx Af Ssfa Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Ksdjuxqzuepfx Af Sefa Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Ksdpfx Afei U Dxue Ssfa Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1989, operating hours: 5,400 h, functionality: fully functional, For sale: A profiling machine with tiltable spindle Manufacturer: Panhans Model: 240 Kedpfx Afewttqie Sjfa Serial number: 150 Year of manufacture: 1989 Weight: approx. 900 kg Operating hours: 5,400 Dimensions: Overall length: 2,550 mm Overall width: 1,350 mm Overall height: 1,700 mm Motor: 7.5 kW Working height: 875 mm Profile spindle: Ø 30 mm (standard) Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Spindle tilt electric: –5° to +45° Spindle height adjustable via electric control Feed: 3-roller feed (manufacturer: Holzher)

Condition: excellent (used), Year of construction: 2005, Copy milling machine URBAN MLA A23 with centering device, year 2005 Kfodowhumhepfx Af Sja Condition: very good

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for Kfedpfx Afod Dhwnj Sja refrigeration dryer and vessel; Various other configurations available

Condition: excellent (used), Year of construction: 1995, WEINIG Q 18 - immediately available - long infeed table 2000 mm Kodpfevdfyrex Af Ssfa - 4 spindles

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Bürkle U140 Veneer Press 4 intermediate plates Plate dimensions: 3050 x 1350 mm Kedpfx Afoxn Um Eo Sefa Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Plates and hydraulics in good technical condition

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Kfsdpswgwlkofx Af Sja Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Kfjdpfxevvi Nbs Af Soa